We study security solutions for dual-functional radar communication (DFRC) systems, which detect the radar target and communicate with downlink cellular users in millimeter-wave (mmWave) wireless networks simultaneously. Uniquely for such scenarios, the radar target is regarded as a potential eavesdropper which might surveil the information sent from the base station (BS) to communication users (CUs), that is carried by the radar probing signal. Transmit waveform and receive beamforming are jointly designed to maximize the signal-to-interference-plus-noise ratio (SINR) of the radar under the security and power budget constraints. We apply a Directional Modulation (DM) approach to exploit constructive interference (CI), where the known multiuser interference (MUI) can be exploited as a source of useful signal. Moreover, to further deteriorate the eavesdropping signal at the radar target, we utilize destructive interference (DI) by pushing the received symbols at the target towards the destructive region of the signal constellation. Our numerical results verify the effectiveness of the proposed design showing a secure transmission with enhanced performance against benchmark DFRC techniques.
We study security solutions for dual-functional radar communication (DFRC) systems, which detect the radar target and communicate with downlink cellular users in millimeter-wave (mmWave) wireless networks simultaneously. Uniquely for such scenarios, the radar target is regarded as a potential eavesdropper which might surveil the information sent from the base station (BS) to communication users (CUs), that is carried by the radar probing signal. Transmit waveform and receive beamforming are jointly designed to maximize the signal-to-interference-plus-noise ratio (SINR) of the radar under the security and power budget constraints. We apply a Directional Modulation (DM) approach to exploit constructive interference (CI), where the known multiuser interference (MUI) can be exploited as a source of useful signal. Moreover, to further deteriorate the eavesdropping signal at the radar target, we utilize destructive interference (DI) by pushing the received symbols at the target towards the destructive region of the signal constellation. Our numerical results verify the effectiveness of the proposed design showing a secure transmission with enhanced performance against benchmark DFRC techniques.
The following paper models a secure full duplex (FD) integrated sensing and communication (ISAC) scenario, where malicious eavesdroppers aim at intercepting the downlink (DL) as well as the uplink (UL) information exchanged between the dual functional radar and communication (DFRC) base station (BS) and a set of communication users. The DFRC BS, on the other hand, aims at illuminating radar beams at the eavesdroppers in order to sense their physical parameters, while maintaining high UL/DL secrecy rates. Based on the proposed model, we formulate a power efficient secure ISAC optimization framework design, which is intended to guarantee both UL and DL secrecy rates requirements, while illuminating radar beams towards eavesdroppers. The framework exploits artificial noise (AN) generation at the DFRC BS, along with UL/DL beamforming design and UL power allocation. We propose a beamforming design solution to the secure ISAC optimization problem. Finally, we corroborate our findings via simulation results and demonstrate the feasibility, as well as the superiority of the proposed algorithm, under different situations. We also reveal insightful trade-offs achieved by our approach.
This paper considers transmit beamforming in dual‐function radar‐communication (DFRC) system, where a DFRC transmitter simultaneously communicates with a communication user and detects a malicious target with the same waveform. Since the waveform is embedded with information, the information is risked to be intercepted by the target. To address this problem, physical‐layer security technique is exploited. By using secrecy rate and estimation rate as performance measure for communication and radar, respectively, three secrecy rate maximization (SRM) problems are formulated, including the SRM with and without artificial noise (AN) and robust SRM. For the SRM beamforming, we prove that the optimal beamformer can be computed in closed form. For the AN‐aided SRM, by leveraging alternating optimization, similar closed‐form solution is obtained for the beamformer and the AN covariance matrix. Finally, the imperfect CSI of the target is also considered under the premise of a moment‐based random phase‐error model on the direction of arrival at the target. Simulation results demonstrate the efficacy and robustness of the proposed designs.
This paper studies the joint secure transceiver design for the full-duplex integrated sensing and communication (ISAC) system, in which the base station performs the target tracking and communicates with the downlink and the uplink users by reusing the resources. Here, the target, referred to as Eve, is a potential eavesdropper with the intention of intercepting both the downlink and the uplink information. The security problem of the full-duplex ISAC system has not been studied well, where the sensing and communication signals suffer from the serious interference. In this paper, we jointly design the information beamformer, the radar waveform, the uplink communication receive filter, and the radar receive filter to achieve the downlink and uplink communication security and the target tracking. Specifically, both the Eve’s signal-to-interference-plus-noise ratio minimization and the secrecy rate maximization problems, subject to the sensing and the communication constraints, are formulated for the ISAC system from the perspectives of the quality of service and the secrecy rate. An iterative algorithm is proposed for solving the formulated problems. We prove that, under appropriate conditions, the proposed iterative algorithm converges to the Karush-Kuhn-Tucker optimal point of the original problem without the rank 1 constraint. We further extend the joint design to the case of the imperfect wiretap channel and the angle uncertainty. Numerical results show that our scheme remarkably outperforms the benchmark approaches. The performance is close to that of designing the secure communication and the sensing separately.
In this paper, the physical-layer security of a cooperative wireless system with multi-antenna full-duplex (FD) destination is examined. More specifically, we consider a cooperative transmission scenario in which a source communicates with a destination through a relay in the presence of an eavesdropper. In order to degrade the wiretap channel, the FD destination simultaneously transmits an interference signal towards the eavesdropper, while receiving information from the relay. A joint transmit and receive beamformer design is proposed to maximize the signal-to-interference-plus-noise ratio (SINR) at the destination, while guaranteeing that the SINR at the eavesdropper is below a certain threshold. We reformulate the optimization problem as a semidefinite relaxation problem in terms of a transmit beamforming matrix. To balance the performance and system complexity, we investigate suboptimum beamforming designs based on zero-forcing criterion. We derive exact closed-form expressions for the average secrecy rates of the proposed suboptimum designs. Our results reveal that optimum and suboptimum beamforming schemes along with friendly jamming significantly improve the secrecy performance. Moreover, simulation results demonstrate that the optimum scheme outperforms suboptimum schemes, especially in high transmit power regimes.
Physical layer security has drawn significant attention in recent years because of its advancement in preventing confidential information leakage to eavesdroppers. In this paper, we focus on secure beamformer designs in multiuser multi-input multi-output (MU-MIMO) systems with a multi-antenna eavesdropper attempting to overhear the confidential information of a particular user. Unlike the existing work, we aim to exploit the inherent multi-user interference to disrupt the reception of the eavesdropper and enhance the security of wireless communications. Particularly, utilizing practical signal-to-interference-noise metrics, the objective of the secure beamformer design is to minimize the eavesdropper's SINR, while providing legitimate users with required prespecified SINRs to guarantee the qualify of service. We propose secure beamformer designs for both downlink and uplink transmissions, under the conditions of known and unknown eavesdropper's channels, respectively. With the proposed secure beamformers, the multiuser signal behaves like the artificial noise or distributed friendly jamming, which can further degrade the reception of the eavesdropper. Extensive simulation studies confirm our analytical performance predictions and illustrate the advantages of proposed beamformer designs for secure MU-MIMO transmissions.
Physical layer security has drawn significant attention in recent years because of its advances in preventing confidential information leakage to eavesdroppers. In this paper, we focus on secure beamformer designs in multi-user multi-input multi-output (MU-MIMO) systems with a multi-antenna eavesdropper attempting to overhear the confidential information of a particular user. Unlike existing works, we aim to exploit inherent multi-user interference to disrupt the reception of the eavesdropper and enhance the security of wireless communications. Particularly, utilizing practical signal-to-interference-noise (SINR) metrics, the objective of secure beamformer design is to minimize the eavesdropper's SINR, while providing legitimate users with required pre-specified SINRs to guarantee quality of service (QoS).We propose secure beamformer designs for the downlink transmission situation, under the conditions of known and unknown eavesdropper's channels, respectively. With the proposed secure beamformers, the multi-user signal behaves like artificial noise or distributed friendly jamming, which can further degrade the reception of the eavesdropper. Extensive simulation studies confirm our analytical performance predictions and illustrate the advantages of the proposed beamformer designs for secure MU-MIMO transmissions.