In this paper, the physical-layer security of a cooperative wireless system with multi-antenna full-duplex (FD) destination is examined. More specifically, we consider a cooperative transmission scenario in which a source communicates with a destination through a relay in the presence of an eavesdropper. In order to degrade the wiretap channel, the FD destination simultaneously transmits an interference signal towards the eavesdropper, while receiving information from the relay. A joint transmit and receive beamformer design is proposed to maximize the signal-to-interference-plus-noise ratio (SINR) at the destination, while guaranteeing that the SINR at the eavesdropper is below a certain threshold. We reformulate the optimization problem as a semidefinite relaxation problem in terms of a transmit beamforming matrix. To balance the performance and system complexity, we investigate suboptimum beamforming designs based on zero-forcing criterion. We derive exact closed-form expressions for the average secrecy rates of the proposed suboptimum designs. Our results reveal that optimum and suboptimum beamforming schemes along with friendly jamming significantly improve the secrecy performance. Moreover, simulation results demonstrate that the optimum scheme outperforms suboptimum schemes, especially in high transmit power regimes.
In this paper, the physical-layer security of a cooperative wireless system with multi-antenna full-duplex (FD) destination is examined. More specifically, we consider a cooperative transmission scenario in which a source communicates with a destination through a relay in the presence of an eavesdropper. In order to degrade the wiretap channel, the FD destination simultaneously transmits an interference signal towards the eavesdropper, while receiving information from the relay. A joint transmit and receive beamformer design is proposed to maximize the signal-to-interference-plus-noise ratio (SINR) at the destination, while guaranteeing that the SINR at the eavesdropper is below a certain threshold. We reformulate the optimization problem as a semidefinite relaxation problem in terms of a transmit beamforming matrix. To balance the performance and system complexity, we investigate suboptimum beamforming designs based on zero-forcing criterion. We derive exact closed-form expressions for the average secrecy rates of the proposed suboptimum designs. Our results reveal that optimum and suboptimum beamforming schemes along with friendly jamming significantly improve the secrecy performance. Moreover, simulation results demonstrate that the optimum scheme outperforms suboptimum schemes, especially in high transmit power regimes.
This paper studies secrecy rate optimization in a wireless network with a single-antenna source, a multi-antenna destination and a multi-antenna eavesdropper. This is an unfavorable scenario for secrecy performance as the system is interference-limited. In the literature, assuming that the receiver operates in half duplex (HD) mode, the aforementioned problem has been addressed via use of cooperating nodes who act as jammers to confound the eavesdropper. This paper investigates an alternative solution, which assumes the availability of a full duplex (FD) receiver. In particular, while receiving data, the receiver transmits jamming noise to degrade the eavesdropper channel. The proposed self-protection scheme eliminates the need for external helpers and provides system robustness. For the case in which global channel state information is available, we aim to design the optimal jamming covariance matrix that maximizes the secrecy rate and mitigates loop interference associated with the FD operation. We consider both fixed and optimal linear receiver design at the destination, and show that the optimal jamming covariance matrix is rank-1, and can be found via an efficient 1-D search. For the case in which only statistical information on the eavesdropper channel is available, the optimal power allocation is studied in terms of ergodic and outage secrecy rates. Simulation results verify the analysis and demonstrate substantial performance gain over conventional HD operation at the destination.
This paper proposes optimum beamforming for a system consisting of a source, a full-duplex (FD) relay, an intended destination, and an eavesdropper. The source and destination are single-antenna nodes, whereas the FD relay is a multi-antenna node. Our objective is to find the optimum receive and transmit beamformers at the relay so that the secrecy rate is maximized. The joint optimization problem is equivalently expressed in terms of the transmit beamformer. The resulting optimization is non-convex. However, we equivalently reformulate it to a suitable form so that the optimum solution is obtained by solving semi-definite relaxation problem, in conjunction with a line search confined to a specific region. Computer simulations demonstrate significant increase in secrecy rate compared to the conventional secure half-duplex relay communications.
Cooperative jamming is an approach that has been recently proposed for improving physical layer based security for wireless networks in the presence of an eavesdropper. While the source transmits its message to its destination, a relay node transmits a jamming signal to create interference at the eavesdropper. In this paper, a scenario in which the relay is equipped with multiple antennas is considered. A novel system design is proposed for determining the antenna weights and transmit power of source and relay, so that the system secrecy rate is maximized subject to a total transmit power constraint, or, the transmit power is minimized subject to a secrecy rate constraint. Since the optimal solutions to these problems are difficult to obtain, suboptimal closed-form solutions are proposed that introduce an additional constraint, i.e., the complete nulling of jamming signal at the destination.
In this paper, we investigate the physical layer security (PLS) of cooperative wireless-powered networks where a source transmits confidential information to a destination with the aid of wireless-powered intermediate nodes equipped with multiple antennas in the presence of a passive eavesdropper. We consider two generalized joint relay and jammer selection (GJRJS) frameworks based on the power splitting (PS) and time switching (TS) techniques, respectively. Specifically, the intermediate nodes which cannot decode the source signal successfully are selected to act as friendly jammers to transmit artificial noise, and the remaining nodes are exploited as relays to simultaneously forward the source signal through cooperative beamforming. We further propose two cooperative secure beamforming (CSB) schemes for the PS-based GJRJS (PS-GJRJS) and TS-based GJRJS (TS-GJRJS) frameworks, respectively. To be specific, we investigate the optimization of the beamforming vector of our selected relays for maximizing the secrecy rate of the source–destination transmission. A closed-form solution is derived under the assumption of available instantaneous channel state information (CSI) of the main link and statistical CSI of the wiretap link. In addition, we also illustrate that the pure relay selection (PRS) scheme is a special case of our GJRJS framework at high signal-to-noise ratios (SNRs). The numerical results show that the proposed CSB scheme achieves a higher secrecy rate than the traditional maximal ratio transmission (MRT) method for both the PS-GJRJS and TS-GJRJS frameworks. Additionally, the GJRJS framework outperforms the PRS as well as the joint best relay and jammer selection (JBRJS) methods in terms of secrecy rate.
In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.