Networking superconducting quantum computers is a longstanding challenge in quantum science. The typical approach has been to cascade transducers: converting to optical frequencies at the transmitter and to microwave frequencies at the receiver. However, the small microwave-optical coupling and added noise have proven formidable obstacles. Instead, we propose optical networking via heralding end-to-end entanglement with one detected photon and teleportation. This new protocol can be implemented on standard transduction hardware while providing significant performance improvements over transduction. In contrast to cascaded direct transduction, our scheme absorbs the low optical-microwave coupling efficiency into the heralding step, thus breaking the rate-fidelity trade-off. Moreover, this technique unifies and simplifies entanglement generation between superconducting devices and other physical modalities in quantum networks.
Networking superconducting quantum computers is a longstanding challenge in quantum science. The typical approach has been to cascade transducers: converting to optical frequencies at the transmitter and to microwave frequencies at the receiver. However, the small microwave-optical coupling and added noise have proven formidable obstacles. Instead, we propose optical networking via heralding end-to-end entanglement with one detected photon and teleportation. This new protocol can be implemented on standard transduction hardware while providing significant performance improvements over transduction. In contrast to cascaded direct transduction, our scheme absorbs the low optical-microwave coupling efficiency into the heralding step, thus breaking the rate-fidelity trade-off. Moreover, this technique unifies and simplifies entanglement generation between superconducting devices and other physical modalities in quantum networks.
Quantum state transfer between microwave and optical frequencies is essential for connecting superconducting quantum circuits to optical systems and extending microwave quantum networks over long distances. However, establishing such a quantum interface is extremely challenging because the standard direct quantum transduction requires both high coupling efficiency and small added noise. We propose an entanglement-based scheme-generating microwave-optical entanglement and using it to transfer quantum states via quantum teleportation-which can bypass the stringent requirements in direct quantum transduction and is robust against loss errors. In addition, we propose and analyze a counterintuitive design-suppress the added noise by placing the device at a higher temperature environment-which can improve both the device quality factor and power handling capability. We systematically analyze the generation and verification of entangled microwave-optical-photon pairs. The parameter for entanglement verification favors the regime of cooperativity mismatch and can tolerate certain thermal noises. Our scheme is feasible given the latest advances on electro-optomechanics, and can be generalized to various physical systems.
A quantum network that distributes and processes entanglement would enable powerful new computers and sensors. Optical photons with a frequency of a few hundred terahertz are perhaps the only way to distribute quantum information over long distances. Superconducting qubits on the other hand, which are one of the most promising approaches for realizing large-scale quantum machines, operate naturally on microwave photons that have roughly 40,000 times less energy. To network these quantum machines across appreciable distances, we must bridge this frequency gap and learn how to generate entanglement across widely disparate parts of the electromagnetic spectrum. Here we implement and demonstrate a transducer device that can generate entanglement between optical and microwave photons, and use it to show that by detecting an optical photon we add a single photon to the microwave field. We achieve this by using a gigahertz nanomechanical resonance as an intermediary, and efficiently coupling it to optical and microwave channels through strong optomechanical and piezoelectric interactions. We show continuous operation of the transducer with 5% frequency conversion efficiency, and pulsed microwave photon generation at a heralding rate of 15 hertz. Optical absorption in the device generates thermal noise of less than two microwave photons. Joint measurements on optical photons from a pair of transducers would realize entanglement generation between distant microwave-frequency quantum nodes. Improvements of the system efficiency and device performance, necessary to realize a high rate of entanglement generation in such networks are within reach.
The complementary features of different qubit platforms for computing and communicating impose an intrinsic hardware heterogeneity in any quantum network, where nodes, while processing and storing quantum information, must also communicate through quantum links. Indeed, one of the most promising hardware platforms at quantum node scale for scalable and fast quantum computing is the superconducting technology, which operates at microwave frequencies. Whereas, for communicating at distances of practical interest beyond few meters, quantum links should operate at optical frequencies. Therefore, to allow the interaction between superconducting and photonic technologies, a quantum interface, known asquantum transducer, able to convert one type of qubit to another is required. This paper aims to provide a tutorial treatise on the fundamental research challenges of quantum transduction. The tutorial is structured around a communications engineering framework, thereby shedding light on its fundamental role in quantum network design and deployment—a perspective often overlooked in existing literature. This framework allows us to categorize different transduction modalities and to reveal an unorthodox one where the transducer itself can act as an entanglement source. From this standpoint, it is possible to conceive different source-destination link archetypes, where transduction plays a crucial role in the communication performances. The analysis also translates the quantum transduction process into a proper functional block within a new communication system model for a quantum network.
The coherent conversion between microwave and optical photons, known as quantum transduction, is critical for connecting superconducting processors to optical networks. Existing methods are limited by complications associated with optical pumping. We propose a pump-free microwave-optical Bell-pair source for teleportation-based transduction. Using a spin or atomic system resonantly coupled to optical and microwave cavities, the scheme generates loss-robust heralded Bell pairs. Across color centers, atomic ensembles, and phonon-mediated systems, this assembly achieves kilohertz-range heralding rates with high fidelity.
Quantum transduction, which coherently converts quantum states between microwave and optical frequency domains, is a key technology for hybrid quantum architectures. Its performance, however, is fundamentally limited by thermal noise. Direct quantum transduction is particularly susceptible to noise and often fails to achieve positive quantum capacity. Entanglement-based quantum transduction, which realizes state conversion through quantum teleportation assisted by microwave-optical entanglement, is intrinsically more robust against thermal noise. However, generating sufficiently strong entanglement in a realistic thermal environment remains a major challenge. In this paper, we exploit correlated noise as a resource for quantum transduction. For direct quantum transduction, it is shown that the noise correlations give rise to controllable interference terms that substantially suppress the effective channel noise. For entanglement-based quantum transduction, the same correlations enhance the generation of microwave-optical entanglement, thereby improving the fidelity of teleportation-based conversion. As a result, both transduction protocols exhibit broad regions of positive quantum capacity over experimentally relevant ranges of cooperativity. We further discuss a possible physical mechanism for engineering the required noise correlations, providing theoretical guidance for experimental implementations. These results suggest that correlated noise can substantially relax the stringent cryogenic requirements for microwave-optical quantum transduction and facilitate the realization of practical hybrid quantum networks.
Superconducting quantum circuits are a leading hardware candidate for realizing a large-scale fault-tolerant quantum computer. However, scaling superconducting quantum computers will soon approach the physical limits imposed by their cryogenic operating environments. Consequently, interconnects between multiple processor modules will become increasingly necessary for scaling quantum computers. Optical fiber is a particularly promising candidate for these interconnects due to its low loss and negligible thermal noise at room temperature. However, interfacing microwave-frequency superconducting circuits with optical fibers presents several challenges. In this thesis, we present a modular architecture which addresses many of the current challenges in building this interface. We develop an optomechanical quantum transducer which is capable of generating microwave- and optical-frequency photons in pairs, and demonstrate quantum entanglement between these microwave-optical photon pairs. Further, we develop a superconducting qubit module optimized for efficient absorption of itinerant microwave photons, and demonstrate a high-efficiency photon catch protocol. Finally, we connect the superconducting qubit module to the transducer module via a superconducting microwave cable. We drive the microwave-optical photon pair generation process in the transducer module and employ the photon catch protocol in the qubit module to facilitate state transfer between the qubit and the flying microwave photon from the transducer. We observe correlations between the final qubit state and the detection of an optical photon, demonstrating a crucial step toward establishing quantum entanglement between superconducting qubits and light. We discuss ongoing progress and challenges in realizing hybrid entanglement and in extending this approach to entangle remote superconducting qubits over optical networks.