Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2007.07756 · Optics Express

Two-way single-photon-level frequency conversion between 852 nm and 1560 nm for connecting cesium D2 line with the telecom C-band

Kong Zhang, Jun He, Junmin Wang

Published Aug 21, 2020• 15 citations
arXivHTMLPDF

Abstract

A compact setup for two-way single-photon-level frequency conversion between 852 nm and 1560 nm has been implemented with the same periodically-poled magnesium-oxide-doped lithium niobate (PPMgO:LN) bulk crystals for connecting cesium D2 line (852 nm) to telecom C-band. By single-pass mixing a strong continuous-wave pump laser at 1878 nm and the single-photon-level periodical signal pulses in a 50-mm-long PPMgO:LN bulk crystal, the conversion efficiency of ∼ 1.7% (∼ 1.9%) for 852-nm to 1560-nm down-conversion (1560-nm to 852-nm up-conversion) have been achieved. We analyzed noise photons induced by the strong pump laser beam, including the spontaneous Raman scattering (SRS) and the spontaneous parametric down-conversion (SPDC) photons, and the photons generated in the cascaded nonlinear processes. The signal-to-noise ratio (SNR) has been improved remarkably by using the narrow-band filters and changing polarization of the noise photons in the difference frequency generation (DFG) process. With further improvement of the conversion efficiency by employing PPMgO:LN waveguide, instead of bulk crystal, our study may provide the basics for cyclic photon conversion in quantum network.

DOI
10.1364/oe.402355

Related papers

Improving the Signal-to-Noise Ratio of Photonic Frequency Conversion from 852 nm to 1560 nm Based on a Long-Wavelength Laser-Pumped PPLN Waveguide Module

Miao Guo, Kong Zhang, Yunhao Zhang +2 more

The storage wavelength of quantum nodes based on atomic systems does not match the wavelength of optical fiber communication, which requires the establishment of an efficient conversion system between flying bits and storage bits. In this paper, based on the nonlinear wavelength conversion technology of the periodically poled lithium niobate waveguide, a low-noise conversion of 852-nm photons to 1560-nm photons was achieved by a 1878-nm pump laser. The generation mechanism and transmission mechanism of noise due to nonlinear process are analyzed theoretically. The noise photons introduced by the spontaneous parameter downconversion and spontaneous Raman scattering process of a strong pump laser are experimentally studied. The noise suppression near 1560 nm is realized by the fiber Bragg grating (FBG) filter. In the experiment, when the FBG bandwidth is reduced from 0.257 nm to 0.130 nm, the signal-to-noise ratio (SNR) increases from 52 to 90. Our results show that the SNR can be greatly improved by using a narrower band filter. Therefore, the quantum node is connected to the fiber channel, and the signal can be transmitted over long distances with low loss and high fidelity.

Photonics•Dec 11, 2022•3 citations

Quantum frequency conversion of memory-compatible single photons from 606 nm to the telecom C-band

Nicolas Maring, Dario Lago-Rivera, Andreas Lenhard +2 more

We report on quantum frequency conversion of memory-compatible narrow-bandwidth photons at 606 nm to the telecom C-band at 1552$\,$nm. The 200$\,$ns long photons, compatible with Praseodymium-based solid-state quantum memories are frequency converted using a single-step difference frequency generation process in a periodically poled Lithium Niobate waveguide. We characterize the noise processes involved in the conversion and by applying strong spectral filtering of the noise, we demonstrate high signal-to-noise ratio conversion at the single photon level (SNR$\,>\,$100 for a mean input photon number per pulse of 1). We finally observe that a memory compatible heralded single photon with a bandwidth of 1.8$\,$MHz, obtained from a spontaneous parametric down conversion pair source, still shows a strong non-classical behavior after conversion. We first demonstrate that correlations between heralding and converted heralded photons stay in the non-classical regime. Moreover, we measured the heralded autocorrelation function of the heralded photon using the converter device as a frequency-domain beam splitter, yielding a value of $0.19\pm0.07$. The presented work represents a step towards the connection of several quantum memory systems emitting narrow-band visible photons to the telecommunication wavelengths.

arXiv:1801.03727•Optica•Apr 25, 2018•79 citations

Quantum frequency conversion of photons with microsecond duration from the visible to the telecommunication C band

Sören Wengerowsky, Stefano Duranti, Lukas Heller +1 more

Quantum frequency conversion is a widely used technique to interface atomic systems with the telecom band in order to facilitate propagation over longer distances in fiber. Here, we demonstrate the difference-frequency conversion from 606 nm to 1552 nm of microsecond-long weak coherent pulses at the single-photon level compatible with $\mathrm{Pr}$${}^{3+}$:$\mathrm{Y}$${}_{2}$$\mathrm{Si}\mathrm{O}$${}_{5}$ quantum memories, with a high signal-to-noise ratio (SNR). We use a single-step difference-frequency-generation process with a continuous-wave pump at 994 nm in a periodically poled lithium niobate ($\mathrm{Mg}\mathrm{O}$:ppLN) waveguide and ultranarrow spectral filtering down to a bandwidth of 12.5 MHz. With this setup, we achieve the conversion of weak coherent pulses of duration up to 13.6 \textmu{}s with a device efficiency of about 25 % and an SNR >460 for 10-$\text{\ensuremath{\mu}}\mathrm{s}$-long pulses containing one photon on average. This SNR is large enough to enable a high-fidelity conversion of qubits emitted from an emissive quantum memory based on $\mathrm{Pr}$${}^{3+}$:$\mathrm{Y}$${}_{2}$$\mathrm{Si}\mathrm{O}$${}_{5}$ and to realize an interface with quantum processing nodes based on narrow-linewidth cavity-enhanced trapped ions.

arXiv:2412.15193•Physical Review Applied•Feb 20, 2025•7 citations

Low-noise cascaded frequency conversion of 637.2 nm light to the telecommunication C-band in a single-waveguide device

Fabrice von Chamier, Joscha Hanel, Chris Müller +3 more

Interconnected quantum devices are the building blocks of quantum networks, where state transduction plays a central role. The frequency conversion of photons into the telecommunication C-band is decisive in taking advantage of current low-loss transmission lines. Here, we report the difference frequency conversion of 637.2 nm fluorescent light from a cluster of NV centers in diamond to tunable wavelengths between 1559.0 nm and 1564.9 nm. In order to avoid detrimental noise from spontaneous emissions, we use a two-step conversion device based on a single-pumped periodically poled lithium niobate waveguide. We observed a total external (internal) conversion efficiency of 3.0 ± 0.1 (20.5 ± 0.8) % with a noise rate of 2.4 ± 0.8 (16 ± 5) cps/GHz.

arXiv:2502.14557•Optics Express•Apr 15, 2025•4 citations

Cascaded downconversion interface to convert single-photon-level signals at 650 nm to the telecom band

Vahid Esfandyarpour, Carsten Langrock, M. M. Fejer

We present a device designed for two-step downconversion of single-photon-level signals at 650 nm to the 1.5-μm band with low excess noise and low required pump power as a quantum interface between matter-qubit-based nodes and low-loss photonic channels for quantum communication networks. The required pump power for this interface is around 60% of that for a comparable conventional single-pass device, which reduces the demand on the pump laser and yields a corresponding reduction in dark counts due to inelastic pump scattering. The single-photon-level signal at 649.7 nm is downconverted to the telecom band using a fiber-coupled reverse proton exchange periodically poled lithium niobate waveguide and a 2.19-μm pump laser. By testing the device in the linear regime with a classical input, we achieved 99% depletion efficiency for each stage, corresponding to an internal quantum efficiency of 63% at the optimum pump power for the complete cascaded process.

Optics Letters•Nov 13, 2018•19 citations

Frequency down-conversion of 637 nm light to the telecommunication band for non-classical light emitted from NV centers in diamond

Rikizo Ikuta, Toshiki Kobayashi, Shuto Yasui +9 more

We demonstrate a low-noise frequency down-conversion of photons at 637 nm to the telecommunication band at 1587 nm by the difference frequency generation in a periodically-poled lithium niobate. An internal conversion efficiency of the converter is estimated to be 0.44 at the maximum which is achieved by a pump power of 0.43 W, whereas a rate of internal background photons caused by the strong cw pump laser is estimated to be 9 kHz/mW within a bandwidth of about 1 nm. By using the experimental values related to the intrinsic property of the converter, and using the intensity correlation and the average photon number of a 637 nm input light pulse, we derive the intensity correlation of a converted telecom light pulse. Then we discuss feasibility of a single-photon frequency conversion to the telecommunication band for a long-distance quantum communication based on NV centers in diamond.

arXiv:1402.2944•Optics Express•May 1, 2014•39 citations
A compact setup for two-way single-photon-level frequency conversion between 852 nm and 1560 nm has been implemented with the same periodically-poled magnesium-oxide-doped lithium niobate (PPMgO:LN) bulk crystals for connecting cesium D2 line (852 nm) to telecom C-band. By single-pass mixing a strong continuous-wave pump laser at 1878 nm and the single-photon-level periodical signal pulses in a 50-mm-long PPMgO:LN bulk crystal, the conversion efficiency of ∼ 1.7% (∼ 1.9%) for 852-nm to 1560-nm down-conversion (1560-nm to 852-nm up-conversion) have been achieved. We analyzed noise photons induced by the strong pump laser beam, including the spontaneous Raman scattering (SRS) and the spontaneous parametric down-conversion (SPDC) photons, and the photons generated in the cascaded nonlinear processes. The signal-to-noise ratio (SNR) has been improved remarkably by using the narrow-band filters and changing polarization of the noise photons in the difference frequency generation (DFG) process. With further improvement of the conversion efficiency by employing PPMgO:LN waveguide, instead of bulk crystal, our study may provide the basics for cyclic photon conversion in quantum network.
The storage wavelength of quantum nodes based on atomic systems does not match the wavelength of optical fiber communication, which requires the establishment of an efficient conversion system between flying bits and storage bits. In this paper, based on the nonlinear wavelength conversion technology of the periodically poled lithium niobate waveguide, a low-noise conversion of 852-nm photons to 1560-nm photons was achieved by a 1878-nm pump laser. The generation mechanism and transmission mechanism of noise due to nonlinear process are analyzed theoretically. The noise photons introduced by the spontaneous parameter downconversion and spontaneous Raman scattering process of a strong pump laser are experimentally studied. The noise suppression near 1560 nm is realized by the fiber Bragg grating (FBG) filter. In the experiment, when the FBG bandwidth is reduced from 0.257 nm to 0.130 nm, the signal-to-noise ratio (SNR) increases from 52 to 90. Our results show that the SNR can be greatly improved by using a narrower band filter. Therefore, the quantum node is connected to the fiber channel, and the signal can be transmitted over long distances with low loss and high fidelity.
We report on quantum frequency conversion of memory-compatible narrow-bandwidth photons at 606 nm to the telecom C-band at 1552 \,nm. The 200 \,ns long photons, compatible with Praseodymium-based solid-state quantum memories are frequency converted using a single-step difference frequency generation process in a periodically poled Lithium Niobate waveguide. We characterize the noise processes involved in the conversion and by applying strong spectral filtering of the noise, we demonstrate high signal-to-noise ratio conversion at the single photon level (SNR$\,>\,100forameaninputphotonnumberperpulseof1).Wefinallyobservethatamemorycompatibleheraldedsinglephotonwithabandwidthof1.8100 for a mean input photon number per pulse of 1). We finally observe that a memory compatible heralded single photon with a bandwidth of 1.8100forameaninputphotonnumberperpulseof1).Wefinallyobservethatamemorycompatibleheraldedsinglephotonwithabandwidthof1.8\,$MHz, obtained from a spontaneous parametric down conversion pair source, still shows a strong non-classical behavior after conversion. We first demonstrate that correlations between heralding and converted heralded photons stay in the non-classical regime. Moreover, we measured the heralded autocorrelation function of the heralded photon using the converter device as a frequency-domain beam splitter, yielding a value of 0.19±0.070.19\pm0.070.19±0.07. The presented work represents a step towards the connection of several quantum memory systems emitting narrow-band visible photons to the telecommunication wavelengths.
Quantum frequency conversion is a widely used technique to interface atomic systems with the telecom band in order to facilitate propagation over longer distances in fiber. Here, we demonstrate the difference-frequency conversion from 606 nm to 1552 nm of microsecond-long weak coherent pulses at the single-photon level compatible with Pr\mathrm{Pr}Pr3+{}^{3+}3+:Y\mathrm{Y}Y2{}_{2}2​SiO\mathrm{Si}\mathrm{O}SiO5{}_{5}5​ quantum memories, with a high signal-to-noise ratio (SNR). We use a single-step difference-frequency-generation process with a continuous-wave pump at 994 nm in a periodically poled lithium niobate (MgO\mathrm{Mg}\mathrm{O}MgO:ppLN) waveguide and ultranarrow spectral filtering down to a bandwidth of 12.5 MHz. With this setup, we achieve the conversion of weak coherent pulses of duration up to 13.6 \textmu{}s with a device efficiency of about 25 % and an SNR >460 for 10-$\text{\ensuremath{\mu}}\mathrm{s}$-long pulses containing one photon on average. This SNR is large enough to enable a high-fidelity conversion of qubits emitted from an emissive quantum memory based on Pr\mathrm{Pr}Pr3+{}^{3+}3+:Y\mathrm{Y}Y2{}_{2}2​SiO\mathrm{Si}\mathrm{O}SiO5{}_{5}5​ and to realize an interface with quantum processing nodes based on narrow-linewidth cavity-enhanced trapped ions.
Interconnected quantum devices are the building blocks of quantum networks, where state transduction plays a central role. The frequency conversion of photons into the telecommunication C-band is decisive in taking advantage of current low-loss transmission lines. Here, we report the difference frequency conversion of 637.2 nm fluorescent light from a cluster of NV centers in diamond to tunable wavelengths between 1559.0 nm and 1564.9 nm. In order to avoid detrimental noise from spontaneous emissions, we use a two-step conversion device based on a single-pumped periodically poled lithium niobate waveguide. We observed a total external (internal) conversion efficiency of 3.0 ± 0.1 (20.5 ± 0.8) % with a noise rate of 2.4 ± 0.8 (16 ± 5) cps/GHz.
We present a device designed for two-step downconversion of single-photon-level signals at 650 nm to the 1.5-μm band with low excess noise and low required pump power as a quantum interface between matter-qubit-based nodes and low-loss photonic channels for quantum communication networks. The required pump power for this interface is around 60% of that for a comparable conventional single-pass device, which reduces the demand on the pump laser and yields a corresponding reduction in dark counts due to inelastic pump scattering. The single-photon-level signal at 649.7 nm is downconverted to the telecom band using a fiber-coupled reverse proton exchange periodically poled lithium niobate waveguide and a 2.19-μm pump laser. By testing the device in the linear regime with a classical input, we achieved 99% depletion efficiency for each stage, corresponding to an internal quantum efficiency of 63% at the optimum pump power for the complete cascaded process.
We demonstrate a low-noise frequency down-conversion of photons at 637 nm to the telecommunication band at 1587 nm by the difference frequency generation in a periodically-poled lithium niobate. An internal conversion efficiency of the converter is estimated to be 0.44 at the maximum which is achieved by a pump power of 0.43 W, whereas a rate of internal background photons caused by the strong cw pump laser is estimated to be 9 kHz/mW within a bandwidth of about 1 nm. By using the experimental values related to the intrinsic property of the converter, and using the intensity correlation and the average photon number of a 637 nm input light pulse, we derive the intensity correlation of a converted telecom light pulse. Then we discuss feasibility of a single-photon frequency conversion to the telecommunication band for a long-distance quantum communication based on NV centers in diamond.