Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1402.2944 · Optics Express

Frequency down-conversion of 637 nm light to the telecommunication band for non-classical light emitted from NV centers in diamond

Rikizo Ikuta, Toshiki Kobayashi, Shuto Yasui, Shigehito Miki, Taro Yamashita, Hirotaka Terai, Mikio Fujiwara, Takashi Yamamoto, Masato Koashi, Masahide Sasaki, Zhen Wang, Nobuyuki Imoto

Published May 1, 2014• 39 citations
arXivHTMLPDF

Abstract

We demonstrate a low-noise frequency down-conversion of photons at 637 nm to the telecommunication band at 1587 nm by the difference frequency generation in a periodically-poled lithium niobate. An internal conversion efficiency of the converter is estimated to be 0.44 at the maximum which is achieved by a pump power of 0.43 W, whereas a rate of internal background photons caused by the strong cw pump laser is estimated to be 9 kHz/mW within a bandwidth of about 1 nm. By using the experimental values related to the intrinsic property of the converter, and using the intensity correlation and the average photon number of a 637 nm input light pulse, we derive the intensity correlation of a converted telecom light pulse. Then we discuss feasibility of a single-photon frequency conversion to the telecommunication band for a long-distance quantum communication based on NV centers in diamond.

DOI
10.1364/oe.22.011205

Related papers

Low-noise cascaded frequency conversion of 637.2 nm light to the telecommunication C-band in a single-waveguide device

Fabrice von Chamier, Joscha Hanel, Chris Müller +3 more

Interconnected quantum devices are the building blocks of quantum networks, where state transduction plays a central role. The frequency conversion of photons into the telecommunication C-band is decisive in taking advantage of current low-loss transmission lines. Here, we report the difference frequency conversion of 637.2 nm fluorescent light from a cluster of NV centers in diamond to tunable wavelengths between 1559.0 nm and 1564.9 nm. In order to avoid detrimental noise from spontaneous emissions, we use a two-step conversion device based on a single-pumped periodically poled lithium niobate waveguide. We observed a total external (internal) conversion efficiency of 3.0 ± 0.1 (20.5 ± 0.8) % with a noise rate of 2.4 ± 0.8 (16 ± 5) cps/GHz.

arXiv:2502.14557•Optics Express•Apr 15, 2025•4 citations

Spectral noise in frequency conversion from the visible to the telecommunication C-band

Peter C. Strassmann, Anthony Martin, Nicolas Gisin +1 more

We report a detailed study of the noise properties of a visible-to-telecom photon frequency converter based on difference frequency generation (DFG). The device converts 580 nm photons to 1541 nm using a strong pump laser at 930 nm, in a periodically poled lithium niobate ridge waveguide. The converter reaches a maximum device efficiency of 46 % (internal efficiency of 67%) at a pump power of 250 mW. The noise produced by the pump laser is investigated in detail by recording the noise spectra both in the telecom and visible regimes and measuring the power dependence of the noise rates. The noise spectrum in the telecom is very broadband, as expected from previous work on similar DFG converters. However, we also observe several narrow dips in the telecom spectrum, with corresponding peaks appearing in the 580 nm noise spectrum. These features are explained by sum frequency generation of the telecom noise at wavelengths given by the phase-matching condition of different spatial modes in the waveguide. The proposed noise model is in good agreement with all the measured data, including the power dependence of the noise rates, both in the visible and telecom regimes. These results are applicable to the class of DFG converters where the pump laser wavelength is in between the input and target wavelength.

arXiv:1902.02728•Optics Express•May 2, 2019•26 citations

Fiber-integrated Quantum Frequency Conversion for Long-distance Quantum Networking

Zhichuan Liao, Ao Shen, Lai Zhou +2 more

Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.

quant-pharXiv:2604.23444•npj Quantum Information•Apr 28, 2026•0 citations

Efficient frequency downconversion at the single photon level from the red spectral range to the telecommunications C-band

Sebastian Zaske, Andreas Lenhard, Christoph Becher

We report on single photon frequency downconversion from the red part of the spectrum (738 nm) to the telecommunications C-band. By mixing attenuated laser pulses with an average photon number per pulse < 1 with a strong continuous light field at 1403 nm in a periodically poled Zn:LiNbO3 ridge waveguide an internal conversion efficiency of ∼ 73% is achieved. We further investigate the noise properties of the process by measuring the output spectrum. Our results indicate that by narrow spectral filtering a quantum interface should be feasible which bridges the wavelength gap between quantum emitters like color centers in diamond emitting in the red part of the spectrum and low-loss fiber-optic telecommunications wavelengths.

Optics Express•Jun 17, 2011•93 citations

Quantum frequency conversion of memory-compatible single photons from 606 nm to the telecom C-band

Nicolas Maring, Dario Lago-Rivera, Andreas Lenhard +2 more

We report on quantum frequency conversion of memory-compatible narrow-bandwidth photons at 606 nm to the telecom C-band at 1552$\,$nm. The 200$\,$ns long photons, compatible with Praseodymium-based solid-state quantum memories are frequency converted using a single-step difference frequency generation process in a periodically poled Lithium Niobate waveguide. We characterize the noise processes involved in the conversion and by applying strong spectral filtering of the noise, we demonstrate high signal-to-noise ratio conversion at the single photon level (SNR$\,>\,$100 for a mean input photon number per pulse of 1). We finally observe that a memory compatible heralded single photon with a bandwidth of 1.8$\,$MHz, obtained from a spontaneous parametric down conversion pair source, still shows a strong non-classical behavior after conversion. We first demonstrate that correlations between heralding and converted heralded photons stay in the non-classical regime. Moreover, we measured the heralded autocorrelation function of the heralded photon using the converter device as a frequency-domain beam splitter, yielding a value of $0.19\pm0.07$. The presented work represents a step towards the connection of several quantum memory systems emitting narrow-band visible photons to the telecommunication wavelengths.

arXiv:1801.03727•Optica•Apr 25, 2018•79 citations

Low-noise quantum frequency conversion in a monolithic cavity with bulk periodically poled potassium titanyl phosphate

Felix Mann, Helen M. Chrzanowski, Felipe Lucas Gewers +2 more

Interfacing the different building blocks of a future large-scale quantum network will require efficient and noiseless frequency conversion of quantum light. Nitrogen-vacancy centers in diamond are a leading candidate to form the nodes of such a network. However, the performance of a suitable converter remains a bottleneck, with existing demonstrations severely limited by parasitic noise arising at the target telecommunication wavelength. Here we demonstrate a platform for efficient low-noise quantum frequency conversion based on a monolithic bulk periodically poled potassium titanyl phosphate cavity and show its suitability for the conversion of 637-nm single photons from nitrogen-vacancy centers in diamond to telecommunication wavelengths. By resonantly enhancing the power of an off-the-shelf pump laser, we achieve an internal conversion efficiency of $(72.3\ifmmode\pm\else\textpm\fi{}0.4)\mathrm{%}$ while generating noise of only $(110\ifmmode\pm\else\textpm\fi{}4)\phantom{\rule{0.2em}{0ex}}\mathrm{kHz}/\mathrm{nm}$ at the target wavelength without the need for any active stabilization. This constitutes a fivefold reduction in noise over existing state-of-the-art single-step converters at these wavelengths. We verify the almost-ideal preservation of nonclassical correlations by converting photons from a spontaneous-parametric-down-conversion source and moreover show the preservation of time-energy entanglement via Franson interferometry.

arXiv:2304.13459•Physical Review Applied•Nov 3, 2023•28 citations
We demonstrate a low-noise frequency down-conversion of photons at 637 nm to the telecommunication band at 1587 nm by the difference frequency generation in a periodically-poled lithium niobate. An internal conversion efficiency of the converter is estimated to be 0.44 at the maximum which is achieved by a pump power of 0.43 W, whereas a rate of internal background photons caused by the strong cw pump laser is estimated to be 9 kHz/mW within a bandwidth of about 1 nm. By using the experimental values related to the intrinsic property of the converter, and using the intensity correlation and the average photon number of a 637 nm input light pulse, we derive the intensity correlation of a converted telecom light pulse. Then we discuss feasibility of a single-photon frequency conversion to the telecommunication band for a long-distance quantum communication based on NV centers in diamond.
Interconnected quantum devices are the building blocks of quantum networks, where state transduction plays a central role. The frequency conversion of photons into the telecommunication C-band is decisive in taking advantage of current low-loss transmission lines. Here, we report the difference frequency conversion of 637.2 nm fluorescent light from a cluster of NV centers in diamond to tunable wavelengths between 1559.0 nm and 1564.9 nm. In order to avoid detrimental noise from spontaneous emissions, we use a two-step conversion device based on a single-pumped periodically poled lithium niobate waveguide. We observed a total external (internal) conversion efficiency of 3.0 ± 0.1 (20.5 ± 0.8) % with a noise rate of 2.4 ± 0.8 (16 ± 5) cps/GHz.
We report a detailed study of the noise properties of a visible-to-telecom photon frequency converter based on difference frequency generation (DFG). The device converts 580 nm photons to 1541 nm using a strong pump laser at 930 nm, in a periodically poled lithium niobate ridge waveguide. The converter reaches a maximum device efficiency of 46 % (internal efficiency of 67%) at a pump power of 250 mW. The noise produced by the pump laser is investigated in detail by recording the noise spectra both in the telecom and visible regimes and measuring the power dependence of the noise rates. The noise spectrum in the telecom is very broadband, as expected from previous work on similar DFG converters. However, we also observe several narrow dips in the telecom spectrum, with corresponding peaks appearing in the 580 nm noise spectrum. These features are explained by sum frequency generation of the telecom noise at wavelengths given by the phase-matching condition of different spatial modes in the waveguide. The proposed noise model is in good agreement with all the measured data, including the power dependence of the noise rates, both in the visible and telecom regimes. These results are applicable to the class of DFG converters where the pump laser wavelength is in between the input and target wavelength.
Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.
We report on single photon frequency downconversion from the red part of the spectrum (738 nm) to the telecommunications C-band. By mixing attenuated laser pulses with an average photon number per pulse < 1 with a strong continuous light field at 1403 nm in a periodically poled Zn:LiNbO3 ridge waveguide an internal conversion efficiency of ∼ 73% is achieved. We further investigate the noise properties of the process by measuring the output spectrum. Our results indicate that by narrow spectral filtering a quantum interface should be feasible which bridges the wavelength gap between quantum emitters like color centers in diamond emitting in the red part of the spectrum and low-loss fiber-optic telecommunications wavelengths.
We report on quantum frequency conversion of memory-compatible narrow-bandwidth photons at 606 nm to the telecom C-band at 1552 \,nm. The 200 \,ns long photons, compatible with Praseodymium-based solid-state quantum memories are frequency converted using a single-step difference frequency generation process in a periodically poled Lithium Niobate waveguide. We characterize the noise processes involved in the conversion and by applying strong spectral filtering of the noise, we demonstrate high signal-to-noise ratio conversion at the single photon level (SNR$\,>\,100forameaninputphotonnumberperpulseof1).Wefinallyobservethatamemorycompatibleheraldedsinglephotonwithabandwidthof1.8100 for a mean input photon number per pulse of 1). We finally observe that a memory compatible heralded single photon with a bandwidth of 1.8100forameaninputphotonnumberperpulseof1).Wefinallyobservethatamemorycompatibleheraldedsinglephotonwithabandwidthof1.8\,$MHz, obtained from a spontaneous parametric down conversion pair source, still shows a strong non-classical behavior after conversion. We first demonstrate that correlations between heralding and converted heralded photons stay in the non-classical regime. Moreover, we measured the heralded autocorrelation function of the heralded photon using the converter device as a frequency-domain beam splitter, yielding a value of 0.19±0.070.19\pm0.070.19±0.07. The presented work represents a step towards the connection of several quantum memory systems emitting narrow-band visible photons to the telecommunication wavelengths.
Interfacing the different building blocks of a future large-scale quantum network will require efficient and noiseless frequency conversion of quantum light. Nitrogen-vacancy centers in diamond are a leading candidate to form the nodes of such a network. However, the performance of a suitable converter remains a bottleneck, with existing demonstrations severely limited by parasitic noise arising at the target telecommunication wavelength. Here we demonstrate a platform for efficient low-noise quantum frequency conversion based on a monolithic bulk periodically poled potassium titanyl phosphate cavity and show its suitability for the conversion of 637-nm single photons from nitrogen-vacancy centers in diamond to telecommunication wavelengths. By resonantly enhancing the power of an off-the-shelf pump laser, we achieve an internal conversion efficiency of $(72.3\ifmmode\pm\else\textpm\fi{}0.4)\mathrm{%}$ while generating noise of only $(110\ifmmode\pm\else\textpm\fi{}4)\phantom{\rule{0.2em}{0ex}}\mathrm{kHz}/\mathrm{nm}$ at the target wavelength without the need for any active stabilization. This constitutes a fivefold reduction in noise over existing state-of-the-art single-step converters at these wavelengths. We verify the almost-ideal preservation of nonclassical correlations by converting photons from a spontaneous-parametric-down-conversion source and moreover show the preservation of time-energy entanglement via Franson interferometry.