Optics Letters

Cascaded downconversion interface to convert single-photon-level signals at 650 nm to the telecom band

Vahid Esfandyarpour, Carsten Langrock, M. M. Fejer

Published Nov 13, 2018• 19 citations

Abstract

We present a device designed for two-step downconversion of single-photon-level signals at 650 nm to the 1.5-μm band with low excess noise and low required pump power as a quantum interface between matter-qubit-based nodes and low-loss photonic channels for quantum communication networks. The required pump power for this interface is around 60% of that for a comparable conventional single-pass device, which reduces the demand on the pump laser and yields a corresponding reduction in dark counts due to inelastic pump scattering. The single-photon-level signal at 649.7 nm is downconverted to the telecom band using a fiber-coupled reverse proton exchange periodically poled lithium niobate waveguide and a 2.19-μm pump laser. By testing the device in the linear regime with a classical input, we achieved 99% depletion efficiency for each stage, corresponding to an internal quantum efficiency of 63% at the optimum pump power for the complete cascaded process.

DOI: 10.1364/ol.43.005655

Related papers

Downconversion quantum interface for a single quantum dot spin and 1550-nm single-photon channel

Jason S. Pelc, Leo Yu, Kristiaan De Greve +11 more

Long-distance quantum communication networks require appropriate interfaces between matter qubit-based nodes and low-loss photonic quantum channels. We implement a downconversion quantum interface, where the single photons emitted from a semiconductor quantum dot at 910 nm are downconverted to 1560 nm using a fiber-coupled periodically poled lithium niobate waveguide and a 2.2-μm pulsed pump laser. The single-photon character of the quantum dot emission is preserved during the downconversion process: we measure a cross-correlation g(2)(τ = 0) = 0.17 using resonant excitation of the quantum dot. We show that the downconversion interface is fully compatible with coherent optical control of the quantum dot electron spin through the observation of Rabi oscillations in the downconverted photon counts. These results represent a critical step towards a long-distance hybrid quantum network in which subsystems operating at different wavelengths are connected through quantum frequency conversion devices and 1.5-μm quantum channels.

arXiv:1209.6404Optics ExpressNov 27, 201275 citations

Fiber-integrated Quantum Frequency Conversion for Long-distance Quantum Networking

Zhichuan Liao, Ao Shen, Lai Zhou +2 more

Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.

quant-pharXiv:2604.23444npj Quantum InformationApr 28, 20260 citations

Efficient and low-noise single-photon detection in 1550 nm communication band by frequency upconversion in periodically poled LiNbO_3 waveguides

Hidehiko Kamada, Masaki Asobe, Toshimori Honjo +5 more

We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).

Optics LettersMar 18, 200850 citations

Long-wavelength-pumped upconversion single-photon detector at 1550 nm: performance and noise analysis

Jason S. Pelc, Long Ma, Christopher R. Phillips +5 more

We demonstrate upconversion-assisted single-photon detection for the 1.55-μm telecommunications band based on a periodically poled lithium niobate (PPLN) waveguide pumped by a monolithic PPLN optical parametric oscillator. We achieve an internal conversion efficiency of 86%, which results in an overall system detection efficiency of 37%, with excess noise as low as 10(3) counts s(-1). We measure the dark count rate versus the upconversion pump-signal frequency separation and find the results to be consistent with noise photon generation by spontaneous anti-Stokes Raman scattering. These results enable detailed design guidelines for the development of low-noise quantum frequency conversion systems, which will be an important component of fiber-optic quantum networks.

Optics ExpressOct 17, 2011242 citations

Two-way single-photon-level frequency conversion between 852 nm and 1560 nm for connecting cesium D2 line with the telecom C-band

Kong Zhang, Jun He, Junmin Wang

A compact setup for two-way single-photon-level frequency conversion between 852 nm and 1560 nm has been implemented with the same periodically-poled magnesium-oxide-doped lithium niobate (PPMgO:LN) bulk crystals for connecting cesium D2 line (852 nm) to telecom C-band. By single-pass mixing a strong continuous-wave pump laser at 1878 nm and the single-photon-level periodical signal pulses in a 50-mm-long PPMgO:LN bulk crystal, the conversion efficiency of ∼ 1.7% (∼ 1.9%) for 852-nm to 1560-nm down-conversion (1560-nm to 852-nm up-conversion) have been achieved. We analyzed noise photons induced by the strong pump laser beam, including the spontaneous Raman scattering (SRS) and the spontaneous parametric down-conversion (SPDC) photons, and the photons generated in the cascaded nonlinear processes. The signal-to-noise ratio (SNR) has been improved remarkably by using the narrow-band filters and changing polarization of the noise photons in the difference frequency generation (DFG) process. With further improvement of the conversion efficiency by employing PPMgO:LN waveguide, instead of bulk crystal, our study may provide the basics for cyclic photon conversion in quantum network.

arXiv:2007.07756Optics ExpressAug 21, 202015 citations

Quantum frequency down-conversion of single photons at 1552 nm from single InAs quantum dot

Ben Ma, Sihang Wei, Zesheng Chen +3 more

Near-infrared single photon sources in telecommunication bands, especially at 1550 nm, are required for long-distance quantum communication. Here a down-conversion quantum interface is implemented, where the single photons emitted from single InAs quantum dot at 864 nm is down converted to 1552 nm by using a fiber-coupled periodically poled lithium niobate (PPLN) waveguide and a 1.95 μmm pump laser, and the frequency conversion efficiency is ∼40%. The single-photon purity of quantum dot emission is preserved during the down-conversion process, i.e., g (2) (0), only 0.22 at 1552 nm. This present technique advances the III–V semiconductor quantum dots as a promising platform for long-distance quantum communication.

Chinese Physics BSep 1, 20183 citations