Rapid advancement in the domain of quantum technologies has opened up researchers to the real possibility of experimenting with quantum circuits and simulating small-scale quantum programs. Nevertheless, the quality of currently available qubits and environmental noise poses a challenge in the smooth execution of the quantum circuits. Therefore, efficient design automation flows for mapping a given algorithm to the Noisy Intermediate Scale Quantum (NISQ) computer becomes of utmost importance. State-of-the-art quantum design automation tools are primarily focused on reducing logical depth, gate count and qubit count with the recent emphasis on topology-aware (nearest-neighbor compliance) mapping. In this work, we extend the technology mapping flows to simultaneously consider the topology and gate fidelity constraints while keeping logical depth and gate count as optimization objectives. We provide a comprehensive problem formulation and multi-tier approach towards solving it. The proposed automation flow is compatible with commercial quantum computers, such as IBM QX and Rigetti. Our simulation results over 10 quantum circuit benchmarks show that the fidelity of the circuit can be improved up to 3.37X with an average improvement of 1.87X.
Rapid advancement in the domain of quantum technologies has opened up researchers to the real possibility of experimenting with quantum circuits and simulating small-scale quantum programs. Nevertheless, the quality of currently available qubits and environmental noise poses a challenge in the smooth execution of the quantum circuits. Therefore, efficient design automation flows for mapping a given algorithm to the Noisy Intermediate Scale Quantum (NISQ) computer becomes of utmost importance. State-of-the-art quantum design automation tools are primarily focused on reducing logical depth, gate count and qubit count with the recent emphasis on topology-aware (nearest-neighbor compliance) mapping. In this work, we extend the technology mapping flows to simultaneously consider the topology and gate fidelity constraints while keeping logical depth and gate count as optimization objectives. We provide a comprehensive problem formulation and multi-tier approach towards solving it. The proposed automation flow is compatible with commercial quantum computers, such as IBM QX and Rigetti. Our simulation results over 10 quantum circuit benchmarks show that the fidelity of the circuit can be improved up to 3.37X with an average improvement of 1.87X.
Rapid advancement in the domain of quantum technologies have opened up researchers to the real possibility of experimenting with quantum circuits, and simulating small-scale quantum programs. Nevertheless, the quality of currently available qubits and environmental noise pose a challenge in smooth execution of the quantum circuits. Therefore, efficient design automation flows for mapping a given algorithm to the Noisy Intermediate Scale Quantum (NISQ) computer becomes of utmost importance. State-of-the-art quantum design automation tools are primarily focused on reducing logical depth, gate count and qubit counts with recent emphasis on topology-aware (nearest-neighbour compliance) mapping. In this work, we extend the technology mapping flows to simultaneously consider the topology and gate fidelity constraints while keeping logical depth and gate count as optimization objectives. We provide a comprehensive problem formulation and multi-tier approach towards solving it. The proposed automation flow is compatible with commercial quantum computers, such as IBM QX and Rigetti. Our simulation results over 10 quantum circuit benchmarks, show that the fidelity of the circuit can be improved up to 3.37 × with an average improvement of 1.87 ×.
The rapid advancement of Noisy Intermediate-Scale Quantum (NISQ) devices has driven the need for efficient design automation tools that can translate complex engineering models into executable quantum circuits. This study explores the development of automated quantum circuit design frameworks focused on gate optimization and noise-aware compilation, enabling practical quantum computation for engineering applications such as optimization, simulation, and control systems. Traditional circuit design methods often fail to account for hardware constraints, decoherence, and gate infidelity, which significantly affect computational accuracy on NISQ devices. To address these challenges, this research introduces a hybrid automation approach combining quantum transpilation, variational circuit pruning, and error-aware synthesis algorithms to enhance circuit reliability and scalability. The framework integrates quantum-classical co-design principles to optimize both logical and physical circuit layers, leveraging hardware-specific calibration data to adapt compilation strategies dynamically. Through simulations and benchmark analysis, the proposed system demonstrates significant improvements in quantum resource utilization, error mitigation, and gate depth reduction compared to conventional compilation methods. This work underscores the growing importance of design automation in quantum engineering, where algorithmic efficiency must be harmonized with physical constraints to realize functional and scalable quantum workflows. By establishing a methodology for gate-level optimization and noise-adaptive design, the study contributes to bridging the gap between theoretical quantum algorithms and real-world engineering implementations within the NISQ computing era.
Noisy intermediate-scale quantum (NISQ) devices with limited qubit count and connectivity limit the scale of quantum circuits that can be executed. Circuit cutting methods simulate larger quantum computers by decomposing large circuits into small subcircuits that can be executed on NISQ hardware. Existing circuit cutting methods only consider the qubit count of the target hardware for finding the locations of cuts on the circuits. This can result in deeper subcircuits after mapping on the hardware. Fidelity decays exponentially with circuit depth and diminishes the quality of execution. We propose a circuit-cutting framework that reduces variance in the depth of subcircuits after mapping to the hardware. Our method formulates the initial circuit cutting as a multi-objective optimization problem based on an evolutionary search method with the number of cuts and the maximum depth of individual routed subcircuits as fitness objectives. This method is implemented as an extension to the existing Qiskit Circuit Cutting Addon, which allows for integration in existing flows. Our approach achieves reductions in routed subcircuit depth of up to 9.9% across benchmark circuits compared with baseline methods.
Noisy Intermediate-Scale Quantum (NISQ) computers impose severe architectural constraints that prevent direct execution of logical quantum circuits. As a result, quantum circuit mapping—transforming ideal circuits into hardware-compatible forms—has become a critical task in quantum software toolchains. This paper presents a comparative study of key mapping techniques, focusing on circuit depth, SWAP gate overhead, and fidelity awareness. Through a case analysis on a 5-qubit Quantum Fourier Transform (QFT) circuit, we demonstrate the performance trade-offs of several prominent mapping strategies, including naive greedy routing, Qiskit’s SABRE, and CQC’s t|ket>. Our findings reveal that mapping technique selection has a profound impact on circuit quality and feasibility on real NISQ hardware.
Quantum computing is an emerging technology that combines the principles of both computer science and quantum mechanics to solve computationally challenging problems significantly faster than the current classical computers. In this thesis, a proof of concept to generate hardware-executable quantum circuits for Noisy Intermediate-Scale Quantum (NISQ) devices that follow the paradigm of approximate computing is presented. We adopt a multi-level optimization approach and consider the placement of native quantum gates that can be physically implemented on one of the existing quantum systems (IBM, Rigetti) as a circuit topology optimization problem and the adjustment of parameters of these native quantum gates as a continuous design optimization problem. The outer topology problem is solved with the aid of a genetic algorithm, whereas the gradient-descent method is used for the inner design optimization. Our approach starts from the reference circuit and transforms it into an executable circuit with tunable parameters by replacing the high-level quantum operations with a set of approximate decompositions, e.g., single qubit rotation quantum gates or a combination of single qubit rotation gates (matrix multiplication). Later, the inner design optimization ensures that the circuit created is tuned to be executed to achieve an expectation value close to that of the reference circuit. This is complemented by compiler-based optimizations to further reduce or aggregate the quantum gates of the optimized circuit. This three-step pipeline is embedded into an outer genetic algorithm framework that inspects many different circuit designs (the approximate-decomposition replacements are by no means unique) and returns a set of unique approximate quantum circuits that can be executed on hardware. We have tested our circuit generation approach for superconducting quantum systems such as IBM and Rigetti hardware for many different benchmark circuits such as Quantum Fourier Transform, Toffoli, quantum adder, multi-controlled operations and three oracle-based algorithms, namely, Grover's search algorithm, Deutsch and Bernstein-Vazirani algorithm. In nearly all cases, our approach outperforms the quantum compiler frameworks by IBM and Rigetti even on their highest optimization level and produces significantly smaller circuits, up to 2x reduction in the number of gates. In addition, the circuits generated using the proposed approach provide better (a) performance (on average, improved by 24.25%) and (b) reliability (on average, improved by 23.50%) compared to the IBM generated circuits when executed on the ibmq_5_yorktown physical quantum device.
Noisy Intermediate-Scale Quantum (NISQ) devices are promising platforms for practical quantum computing, but their performance is significantly affected by limited qubit availability, gate errors, decoherence, circuit depth, and hardware-dependent noise. Conventional quantum circuits are generally designed and optimized before execution and may not respond effectively to changing hardware conditions during computation. This research proposes a Self-Adaptive Quantum Circuit framework that dynamically modifies quantum circuits according to the current computational resources and noise characteristics of NISQ devices. The proposed framework monitors parameters such as qubit fidelity, gate error rates, circuit depth, execution time, and resource availability, and automatically selects suitable circuit configurations to improve computational performance. Adaptive mechanisms can be employed to reduce unnecessary gates, optimize qubit utilization, and mitigate the impact of hardware noise while maintaining the required computational accuracy. The framework will be evaluated using simulation platforms and available NISQ quantum hardware, comparing adaptive circuits with conventional static circuits using metrics such as accuracy, fidelity, circuit depth, gate count, execution time, and error rate. The expected outcome is a resource-efficient and noise-aware quantum circuit optimization approach capable of improving the reliability and performance of quantum applications on near-term quantum hardware. The proposed research aims to contribute toward more practical, flexible, and hardware-aware quantum computing systems for NISQ-era applications. Keywords: NISQ Computing, Self-Adaptive Quantum Circuits, Quantum Circuit Optimization, Quantum Error Mitigation, Quantum Noise, Quantum Computing.