Spin qubits in silicon quantum dots are one of the most promising building blocks for large scale quantum computers thanks to their high qubit density and compatibility with the existing semiconductor technologies. High fidelity single-qubit gates exceeding the threshold of error correction codes like the surface code have been demonstrated, while two-qubit gates have reached 98% fidelity and are improving rapidly. However, there are other types of error --- such as charge leakage and propagation --- that may occur in quantum dot arrays and which cannot be corrected by quantum error correction codes, making them potentially damaging even when their probability is small. We propose a surface code architecture for silicon quantum dot spin qubits that is robust against leakage errors by incorporating multi-electron mediator dots. Charge leakage in the qubit dots is transferred to the mediator dots via charge relaxation processes and then removed using charge reservoirs attached to the mediators. A stabiliser-check cycle, optimised for our hardware, then removes the correlations between the residual physical errors. Through simulations we obtain the surface code threshold for the charge leakage errors and show that in our architecture the damage due to charge leakage errors is reduced to a similar level to that of the usual depolarising gate noise. Spin leakage errors in our architecture are constrained to only ancilla qubits and can be removed during quantum error correction via reinitialisations of ancillae, which ensure the robustness of our architecture against spin leakage as well. Our use of an elongated mediator dots creates spaces throughout the quantum dot array for charge reservoirs, measuring devices and control gates, providing the scalability in the design.
Spin qubits in silicon quantum dots are one of the most promising building blocks for large scale quantum computers thanks to their high qubit density and compatibility with the existing semiconductor technologies. High fidelity single-qubit gates exceeding the threshold of error correction codes like the surface code have been demonstrated, while two-qubit gates have reached 98% fidelity and are improving rapidly. However, there are other types of error --- such as charge leakage and propagation --- that may occur in quantum dot arrays and which cannot be corrected by quantum error correction codes, making them potentially damaging even when their probability is small. We propose a surface code architecture for silicon quantum dot spin qubits that is robust against leakage errors by incorporating multi-electron mediator dots. Charge leakage in the qubit dots is transferred to the mediator dots via charge relaxation processes and then removed using charge reservoirs attached to the mediators. A stabiliser-check cycle, optimised for our hardware, then removes the correlations between the residual physical errors. Through simulations we obtain the surface code threshold for the charge leakage errors and show that in our architecture the damage due to charge leakage errors is reduced to a similar level to that of the usual depolarising gate noise. Spin leakage errors in our architecture are constrained to only ancilla qubits and can be removed during quantum error correction via reinitialisations of ancillae, which ensure the robustness of our architecture against spin leakage as well. Our use of an elongated mediator dots creates spaces throughout the quantum dot array for charge reservoirs, measuring devices and control gates, providing the scalability in the design.
Recent advances in quantum error correction codes for fault-tolerant quantum computing and physical realizations of high-fidelity qubits in multiple platforms give promise for the construction of a quantum computer based on millions of interacting qubits. However, the classical-quantum interface remains a nascent field of exploration. Here, we propose an architecture for a silicon-based quantum computer processor based on complementary metal-oxide-semiconductor (CMOS) technology. We show how a transistor-based control circuit together with charge-storage electrodes can be used to operate a dense and scalable two-dimensional qubit system. The qubits are defined by the spin state of a single electron confined in quantum dots, coupled via exchange interactions, controlled using a microwave cavity, and measured via gate-based dispersive readout. We implement a spin qubit surface code, showing the prospects for universal quantum computation. We discuss the challenges and focus areas that need to be addressed, providing a path for large-scale quantum computing.
Abstract Recent advances in quantum error correction codes for fault-tolerant quantum computing and physical realizations of high-fidelity qubits in multiple platforms give promise for the construction of a quantum computer based on millions of interacting qubits. However, the classical-quantum interface remains a nascent field of exploration. Here, we propose an architecture for a silicon-based quantum computer processor based on complementary metal-oxide-semiconductor (CMOS) technology. We show how a transistor-based control circuit together with charge-storage electrodes can be used to operate a dense and scalable two-dimensional qubit system. The qubits are defined by the spin state of a single electron confined in quantum dots, coupled via exchange interactions, controlled using a microwave cavity, and measured via gate-based dispersive readout. We implement a spin qubit surface code, showing the prospects for universal quantum computation. We discuss the challenges and focus areas that need to be addressed, providing a path for large-scale quantum computing.
We investigate the performance of two quantum error-correcting codes, the surface code and the Bacon-Shor code, for implementation with spin qubits in silicon. In each case, we construct a logical qubit using a planar array of quantum dots, exploring two encoding schemes: one based solely on single-electron Zeeman qubits (Loss-DiVincenzo qubits), and a hybrid approach combining Zeeman and singlet-triplet qubits. For both codes, we evaluate key performance metrics, including logical state preparation fidelity and cycle-level error correction performance, using state-of-the-art experimental parameters. Our results show that the hybrid encoding consistently outperforms the pure Zeeman-qubit implementation. By identifying the dominant error mechanisms that limit quantum error correction performance, our study highlights concrete targets for improving spin qubit hardware and provides a path toward scalable fault-tolerant architectures. In particular, we find that the logical error rate is not limited by memory errors, but rather by gate errors, especially 1- and 2-qubit gate errors.
Spin qubits in silicon quantum dot arrays are a promising quantum computation platform for long-term scalability due to their small qubit footprint and compatibility with advanced semiconductor manufacturing. However, spin qubit devices face a key architectural bottleneck: the large physical footprint of readout components relative to qubits prevents a dense layout where all qubits can be measured simultaneously, complicating the implementation of quantum error correction. This challenge is offset by the platform's unique rapid shuttling capability, which can be used to transport qubits to distant readout ports. In this work, we explore the design constraints and capabilities of spin qubits in silicon and propose the SNAQ (Shuttling-capable Narrow Array of spin Qubits) surface code architecture, which relaxes the 1:1 readout-to-qubit assumption by leveraging spin shuttling to time-multiplex ancilla qubit initialization and readout. Our analysis shows that, given sufficiently high (experimentally demonstrated) qubit coherence times, SNAQ delivers an orders-of-magnitude reduction in chip area per logical qubit. Additionally, by using a denser grid of physical qubits, SNAQ enables fast transversal logic for short-distance logical operations, achieving over 10x improvement in local logical clock speed while still supporting global operations via lattice surgery. This translates to a 3.2-5.7x improvement in key Adder and Lookup fault-tolerant subroutines. Our work pinpoints critical hardware metrics and provides a compelling path toward high-performance fault-tolerant computation on near-term-manufacturable spin qubit arrays.
Abstract A design for a large-scale surface code quantum processor based on a node/network approach is introduced for semiconductor quantum dot spin qubits. The minimal node contains only seven quantum dots, and nodes are separated on the micron scale, creating useful space for wiring interconnects and integration of conventional transistor circuits. Entanglement is distributed between neighbouring nodes by loading spin singlets locally and then shuttling one member of the pair through a linear array of empty dots. A node contains one data qubit, two ancilla qubits, and additional dots to facilitate electron shuttling and measurement of the ancillas. A four-node GHZ state is realized by sharing three internode singlets followed by local gate operations and ancilla measurements. Further local operations produce an X or Z stabilizer on the four data qubits, which is the fundamental operation of the surface code. Electron shuttling is simulated in the single-valley case using a simple gate electrode geometry without explicit barrier gates, and demonstrates that adiabatic transport is possible on timescales that do not present a speed bottleneck to the processor. An important shuttling error in a clean system is uncontrolled phase rotation of the spin due to modulation of the electronic g -factor during transport, owing to the Stark effect. This error can be reduced by appropriate electrostatic tuning of the stationary electron’s g -factor. While these simulations are unrealistic in neglecting spin–orbit, valley and decoherence effects, they are realistic with respect to the gate-induced potential landscape and are a first step towards more realistic modelling. Using reasonable noise models, we estimate error thresholds with respect to single and two-qubit gate fidelities as well as singlet dephasing errors during shuttling. A twirling protocol transforms the non-Pauli noise associated with exchange gate operations into Pauli noise, making it possible to use the Gottesman–Knill theorem to efficiently simulate large codes.
Quantum computers require a coordinated operation on a large number of quantum bits (qubits), presenting considerable obstacles such as system integration on a large scale, individual qubits control with precision, and significant error correction overhead. Silicon (Si) quantum dot (QD) spin qubits paired with CMOS control circuits promise a scalable solution due to its potential for large-scale integration utilizing well-established semiconductor technologies. This paper proposes a control addressing scheme for QD spin qubits operating on a node network architecture. Compared to the typical 2-dimensional array architecture, this approach considerably lowers the area constraint for control signal routing. Scalable circuits are designed to route the control signals for local and global operations of a surface code quantum error correction through the modular design of tiered switches controlled by demultiplexers. The proposed method is a critical step toward implementing scalable solid-state quantum processors.