High-fidelity readout of semiconductor-based qubits (in particular, Majorana qubits of the future) could be accomplished by dispersive readout, as already used with superconducting qubits. So far, though, the dispersive signals have been small, and the required integration times much longer than typical qubit coherence times. This work shows that signal amplitude can be vastly increased by strongly coupling a sensing gate to a readout quantum dot. This coupling allows readout of this system in the microsecond regime, which is on par with the state of the art for other qubits. Here the chief limiting factor of the signal-to-noise ratio is tunnel coupling.
High-fidelity readout of semiconductor-based qubits (in particular, Majorana qubits of the future) could be accomplished by dispersive readout, as already used with superconducting qubits. So far, though, the dispersive signals have been small, and the required integration times much longer than typical qubit coherence times. This work shows that signal amplitude can be vastly increased by strongly coupling a sensing gate to a readout quantum dot. This coupling allows readout of this system in the microsecond regime, which is on par with the state of the art for other qubits. Here the chief limiting factor of the signal-to-noise ratio is tunnel coupling.
Spin and topological-qubit based quantum computers require an easily scalable and highly sensitive method for readout and manipulation, for which Dispersive Gate Sensing (DGS) is a promising candidate [1, 2]. DGS enables sensing of single electron tunneling events in a mesoscopic system by measuring a reflected Radio Frequency (RF) signal from a resonator capacitively coupled to one of the system’s gate electrodes. From the resonator’s perspective, the system is modeled as an effective ‘parametric capacitance’ [3]. Motivated by its viability for qubit readout and control, we measure transport characteristics of a semiconducting-superconducting hybrid charge island system using this method. Doing so, we observe a spin degeneracy modulation of interdot tunnel couplings resulting from hybridization of a dot orbital with a subgap state of the superconductor, measured entirely within Coulomb blockade. Without DC measurement, we also track a subgap state’s energy via voltage intervals between island charge states as a function of field. Subsequently, we attempt to correlate changes in the resonator’s internal dissipation with coherence of tunneling into the superconducting island. In particular, we collapse a superconducting island’s lowest energy state to the Fermi level by applying a magnetic field. Contrary to expectations, internal dissipation in the resonator did not change dramatically with field, in fact decreasing at charge degeneracy points at all field strengths. We corroborate measurements with existing theory, augmented by simple analytical and numerical models demonstrating that coherence factors of superconducting quasiparticle states and the degeneracy of dot orbitals modulate parametric capacitance. A master equation model of finite temperature interdot tunneling is solved, agreeing with experimental evidence that Sisyphus dissipation is negligible when a dot orbital is hybridized with multiple independent quasiparticle states. To be employed in quantum computers, a full understanding of all phenomena contributing to a DGS signal in these hybrid systems is critical. Hence, these results mark a step towards unambiguous readout of Majorana parity in topological qubits [4].
Dispersive charge sensing is realized in hybrid semiconductor-superconductor nanowires in gate-defined single- and double-island device geometries. Signal-to-noise ratios (SNRs) were measured in both the frequency and time domains. Frequency-domain measurements were carried out as a function of frequency and power and yield a charge sensitivity of 1 × 10–3 e/Hz for an ∼11 MHz measurement bandwidth. Time-domain measurements yield SNR > 1 for a 20 μs integration time. At zero magnetic field, photon-assisted tunneling was detected dispersively in a double-island geometry, indicating coherent hybridization of the two superconducting islands. At an axial magnetic field of 0.6 T, subgap states are detected dispersively, demonstrating the suitability of the method to sensing in the topological regime.
Quantum computers can solve some problems exponentially faster than classical computers. Unfortunately, the computational power of quantum computers is currently limited by the number of working qubits. It is difficult to scale up these systems, because qubits are easily affected by noise in their environment. This noise leads to decoherence: loss of the qubit’s encoded information. A possible solution to diminish decoherence is using Majorana box qubits, as these qubits are predicted to be insensitive to local noise. However, this promising type of qubit does not exist yet. With the research described in this thesis, we aim to contribute to the development of Majorana box qubits (MBQs). In these qubits, Majorana zero modes, the basic elements of MBQs, are contained within a superconducting island to suppress Majorana parity fluctuations caused by quasiparticle poisoning. To enable parity readout of the MBQ, these modes are coupled to quantum dots within a nanowire network. To help realize MBQs, we need a better understanding of quasiparticles in superconducting islands, parity-readout techniques, and ways to fabricate nanowire networks. These three aspects are the focus of the experiments presented in this thesis. To study superconducting islands and readout techniques, we used InAs semiconductor nanowires with an epitaxially grown Al shell. Majorana signatures have already been observed in such nanowires. We addressed quasiparticle dynamics in superconducting islands by measuring the gate-charge modulation of the switching current. We found a consistent 2e-periodic modulation at zero magnetic field, and an exponential decrease of parity lifetime with increasing magnetic field. We explored MBQ readout, using a quantum dot level as a proxy for a Majorana zero mode, and measured its charge hybridization with another dot using gate-based readout. We showed that we can rapidly discriminate between two settings with different tunnel couplings, demonstrating the potential of gate-based readout to measure MBQs. And, using gate-based readout, we could study charge-transfer processes occurring in hybrid structures of superconducting islands coupled to quantum dots. Finally, to find a good material platform for nanowire networks, we characterized two two-dimensional systems. We realized quantum point contacts in InSb, which we used to measure the g-factor anisotropy, and effective electron mass in this system. And, we studied the spin-orbit interaction in InAs/GaSb by extracting the difference in density between electrons with different spin orientations. This thesis finishes with a proposal for a series experiments to realize MBQs. These experiments make use of superconducting islands and the reflectometry setup we developed for gate-based readout.
Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated [X. Mi et al., Nature 555, 599 (2018); A. J. Landig et al., Nature 560, 179 (2018); N. Samkharadze et al., Science 359, 1123 (2018); T. Cubaynes et al., NPJ Quant. Inf. 5, 47 (2019)]. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The strong spin-photon coupling arises from the motion of the electron spin in a local magnetic field gradient. We calculate the signal-to-noise ratio (SNR) of the readout accounting for both Purcell spin relaxation and spin relaxation arising from intrinsic electric noise within the semiconductor. We express the maximum achievable SNR in terms of the cooperativity associated with these two dissipation processes. We find that while the cooperativity increases with the strength of the dipole coupling between the DQD and the resonator, it does not depend on the strength of the magnetic field gradient. We then optimize the SNR as a function of experimentally tunable DQD parameters. We identify wide regions of parameter space where the unwanted backaction of the resonator photons on the qubit is small. Moreover, we find that the coupling of the resonator to other DQD transitions can enhance the SNR by at least a factor of two, a ``straddling'' effect [J. Koch et al., Phys. Rev. A 76, 042319 (2007)] that occurs only at nonzero energy detuning of the DQD double-well potential. We estimate that with current technology, single-shot readout fidelities in the range 82--95% can be achieved within a few $\ensuremath{\mu}\mathrm{s}$ of readout time without requiring the use of Purcell filters.
Fast and high-fidelity qubit measurement is essential for realizing quantum error correction, which is in turn a key ingredient to universal quantum computing. For electron spin qubits, fast readout is one of the significant road blocks toward error correction. Here we examine the dispersive readout of a single spin in a semiconductor double quantum dot coupled to a microwave resonator. We show that using displaced squeezed vacuum states for the probing photons can improve the qubit readout fidelity and speed. Under condition of proper phase matching, we find that a moderate, and only moderate, squeezing can enhance both the signal-to-noise ratio and the fidelity of the qubit-state readout, and the optimal readout time can be shortened to the sub-microsecond range with above 99% fidelity. These enhancements are achieved at low probing microwave intensity, ensuring non-demolition qubit measurement.
Spins in semiconductor quantum dots are a candidate for cryogenic quantum processors due to their exceptionally long coherence times. One major challenge to scaling quantum dot spin qubits is the dense wiring requirements, making it difficult to envision fabricating large arrays of nearest-neighbor-coupled qubits necessary for error correction. We describe a method to solve this problem by spacing the qubits out using high-impedance superconducting resonators with a 2D grid unit cell area of 0.16mm2 using 3D integration. To prove the viability of this approach, we demonstrate 3D integration of a high-impedance TiN resonator coupled to a double quantum dot in a Si/SiGe heterostructure. Using the resonator as a dispersive gate sensor, we tune the device down to the single electron regime with an SNR = 5.36 limited by the resonator-dot capacitance. Characterization of the dot and resonator systems shows such integration can be done while maintaining low charge noise metrics for the quantum dots and with improved loaded quality factors for the superconducting resonator (QL=2.14×104), allowing for high-sensitivity charge detection and the potential for high fidelity 2-qubit gates. This work paves the way for 2D quantum dot qubit arrays with cavity mediated interactions.