arXiv:1806.04021 · IEEE Transactions on Nuclear Science

Control and Readout Software for Superconducting Quantum Computing

Cheng Guo, Futian Liang, Jin Lin, Yu Xu, Lihua Sun, Wei-Yue Liu, Sheng‐Kai Liao, Cheng-Zhi Peng

Published May 31, 2019• 12 citations

Abstract

Being important parts of the superconducting quantum computer, the high-speed arbitrary waveform generator (AWG), ultraprecision dc source, and high-speed digitizer are used to manipulate the qubit. The complexity of an experimental setup increases rapidly as the number of qubits grows. Cumbersome instrument management, distortion of signals, and inefficiency of data transmission are gradually highlighted and become the bottlenecks in scaling up the number of qubits. In addition, fault-tolerant quantum computing has real-time feedback requirements of qubit states. To deal with these challenges, we propose an instrument management software design in this paper. The software maps the resources of separate instruments to a unified virtual instrument, achieving the scalability of the instruments. The processing and correction of signals are deployed on a server, which automatically corrects the distortion of the signals. By designing a multi-threaded mechanism for the AWG and a custom-defined data-link protocol for the digitizer, the efficiency of the software meets the requirements of experiments. Cooperating with the AWG and digitizer, the software provides the real-time feedback capability using an instruction compiler. Thus, the software meets the requirements of superconducting quantum computing, as demonstrated through its application to a 12-bit quantum experiment.

DOI: 10.1109/tns.2019.2920337

Related papers

An FPGA-Based Low Latency AWG for Superconducting Quantum Computers

Yuchen Yang, Zhongtao Shen, Xing Zhu +3 more

This paper reports the development of a low-latency arbitrary waveform generator (AWG), which is suitable for the control and measurement of superconducting quantum computers. It can generate qubit control signals and measurement signals in real time. Compared with commercial AWG, our AWG has less latency and higher analog bandwidth. Compressing latency can reduce system feedback time, and higher analog bandwidth improves the system's integration by mounting more qubits on the readout line. The AWG integrates four high-speed digital-to-analog converters (DACs), phase-locked loop (PLL) circuits, field-programmable gate arrays (FPGAs), and related circuits into a standard PXI 3U board. The waveform generator module, communication interface module, clock module, and configuration module are realized utilizing the FPGA. The FPGA-based hardware architecture enables AWG to be flexibly configured to meet the various needs of quantum experiments. The four-channel AWG has a 2-GSa/s sampling rate, a 14-bit resolution, and 500 MHz bandwidth. The jitter in the AWG output waveform is approximately 3 ps; the latency of the AWG (the time from the feedback trigger received until a feedback pulse is generated) is approximately 55 ns. These designs form the basis of realizing control system for large-scale quantum computing.

IEEE International Instrumentation and Measurement Technology ConferenceMay 17, 20215 citations

Hardware for multi-superconducting qubit control and readout*

Zhan Wang, Hai Yang Yu, Rongli Liu +7 more

We have developed an electronic hardware system for the control and readout of multi-superconducting qubit devices. The hardware system is based on the design ideas of good scalability, high synchronization and low latency. The system, housed inside a VPX-6U chassis, includes multiple arbitrary-waveform generator (AWG) channels, analog-digital-converter (ADC) channels as well as direct current source channels. The system can be used for the control and readout of up to twelve superconducting transmon qubits in one chassis, and control and readout of more and more qubit can be carried out by interconnecting the chassis. By using field programmable gate array (FPGA) processors, the system incorporates three features that are specifically useful for superconducting qubit research. Firstly, qubit signals can be processed using the on-board FPGA after being acquired by ADCs, significantly reducing data processing time and data amount for storage and transmission. Secondly, different output modes, such as direct output and sequential output modes, of AWG can be implemented with pre-encoded FPGA. Thirdly, with data acquisition ADCs and controlAWGs jointly controlled by the same FPGA, the feedback latency can be reduced, and in ourtest a 178.4 ns latency time is realized. This is very useful for future quantum feedback experiments. Finally, we demonstrate the functionality of the system by applying the system to the control and readout of a 10 qubit superconducting quantum processor.

Chinese Physics BMay 24, 20216 citations

High Performance and Scalable AWG for Superconducting Quantum Computing

Jin Lin, Futian Liang, Yu Xu +4 more

Superconducting quantum computer is manufactured based on semiconductor process which makes qubits integration possible. At the same time, this kind of qubit exhibits high performance fidelity, de-coherence time, scalability and requires a programmable arbitrary waveform generator (AWG). This paper presents implementation of an AWG which composed of two gigabit samples per second (GSPS) sampling rate, 16 bit vertical resolution digital to analog converters (DACs). The AWG integrated with separate microwave devices onto a metal plate for the scale-up consideration. A special waveform sequence output controller is designed to realize seamless waveform switching and arbitrary waveform generator. The jitter in multiple AWG channels is around 10ps, Integral nonlinearity (INL) as well as differential nonlinearity (DNL) is about 2 LSB, and the qubit performance of the de-coherence time (T2*) achieved 33% promotion over that of a commercial 1 GSPS, 14 bit AWG.

arXiv:1806.03660Jun 10, 20184 citations

Scalable and customizable arbitrary waveform generator for superconducting quantum computing

Jin Lin, Futian Liang, Yu Xu +4 more

Superconducting quantum processors are manufactured based on a semiconductor process, which makes qubit integration possible. At the same time, this kind of qubit exhibits high-performance fidelity and decoherence time and requires a programmable arbitrary waveform generator (AWG). This paper presents the implementation of an AWG with a sampling rate of two-gigabit samples per second as well as 16-bit vertical resolution digital-to-analog converters. The AWGs are designed for a scaled-up usage scenario by integrating them with separate microwave devices onto a single backplane. A special waveform sequence output controller is designed to realize seamless waveform switching and arbitrary waveform generation. The jitter of multiple AWG channels is around 10 ps, and the integral nonlinearity and differential nonlinearity are both about 2 least significant bits. This customizable AWG has been used in several superconducting quantum processors, and the result of multiple qubits’ measurement verifies that the AWG is qualified for controlling tens of superconducting qubits.

AIP AdvancesNov 1, 201918 citations

Research on Superconducting Qubit Manipulation Based on Arbitrary Waveform Generator

Hengkui Wu, Weiguo Zhu, Jinhao Pang +1 more

Abstract Quantum computing is an emerging technology which will influence the future. Quantum computing is currently limited by the scalability of qubits, especially the qubits manipulation of superconducting computing. In this paper, a superconducting qubits manipulation method based on AWG (Arbitrary Waveform Generator) is proposed. Based on the superconducting quantum computing system, the overall scheme of qubits manipulation is presented, including overall framework, multichannel coherent arbitrary waveform generation design, quantum state reading and acquisition design, multichannel synchronization design and quick feedback transceiver design. The simulation and experiment results show that the proposed method has good scalability, high synchronization index and good signal quality, which can meet the requirements of superconducting quantum computing for qubits manipulation.

Journal of Physics Conference SeriesOct 1, 20202 citations

Superconducting qubit readout and control system based on FPGA and development of a pulse sequencer

BOVE, LEONARDO

This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.

Sep 27, 20250 citations