Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

Research on Superconducting Qubit Manipulation Based on Arbitrary Waveform Generator

Hengkui Wu, Weiguo Zhu, Jinhao Pang, Zhen Cheng

Published Oct 1, 2020• 2 citations
Publisher

Abstract

Abstract Quantum computing is an emerging technology which will influence the future. Quantum computing is currently limited by the scalability of qubits, especially the qubits manipulation of superconducting computing. In this paper, a superconducting qubits manipulation method based on AWG (Arbitrary Waveform Generator) is proposed. Based on the superconducting quantum computing system, the overall scheme of qubits manipulation is presented, including overall framework, multichannel coherent arbitrary waveform generation design, quantum state reading and acquisition design, multichannel synchronization design and quick feedback transceiver design. The simulation and experiment results show that the proposed method has good scalability, high synchronization index and good signal quality, which can meet the requirements of superconducting quantum computing for qubits manipulation.

DOI
10.1088/1742-6596/1650/2/022112

Related papers

Scalable and customizable arbitrary waveform generator for superconducting quantum computing

Jin Lin, Futian Liang, Yu Xu +4 more

Superconducting quantum processors are manufactured based on a semiconductor process, which makes qubit integration possible. At the same time, this kind of qubit exhibits high-performance fidelity and decoherence time and requires a programmable arbitrary waveform generator (AWG). This paper presents the implementation of an AWG with a sampling rate of two-gigabit samples per second as well as 16-bit vertical resolution digital-to-analog converters. The AWGs are designed for a scaled-up usage scenario by integrating them with separate microwave devices onto a single backplane. A special waveform sequence output controller is designed to realize seamless waveform switching and arbitrary waveform generation. The jitter of multiple AWG channels is around 10 ps, and the integral nonlinearity and differential nonlinearity are both about 2 least significant bits. This customizable AWG has been used in several superconducting quantum processors, and the result of multiple qubits’ measurement verifies that the AWG is qualified for controlling tens of superconducting qubits.

AIP Advances•Nov 1, 2019•18 citations

Control and Readout Software for Superconducting Quantum Computing

Cheng Guo, Futian Liang, Jin Lin +5 more

Being important parts of the superconducting quantum computer, the high-speed arbitrary waveform generator (AWG), ultraprecision dc source, and high-speed digitizer are used to manipulate the qubit. The complexity of an experimental setup increases rapidly as the number of qubits grows. Cumbersome instrument management, distortion of signals, and inefficiency of data transmission are gradually highlighted and become the bottlenecks in scaling up the number of qubits. In addition, fault-tolerant quantum computing has real-time feedback requirements of qubit states. To deal with these challenges, we propose an instrument management software design in this paper. The software maps the resources of separate instruments to a unified virtual instrument, achieving the scalability of the instruments. The processing and correction of signals are deployed on a server, which automatically corrects the distortion of the signals. By designing a multi-threaded mechanism for the AWG and a custom-defined data-link protocol for the digitizer, the efficiency of the software meets the requirements of experiments. Cooperating with the AWG and digitizer, the software provides the real-time feedback capability using an instruction compiler. Thus, the software meets the requirements of superconducting quantum computing, as demonstrated through its application to a 12-bit quantum experiment.

arXiv:1806.04021•IEEE Transactions on Nuclear Science•May 31, 2019•12 citations

An FPGA-Based Low Latency AWG for Superconducting Quantum Computers

Yuchen Yang, Zhongtao Shen, Xing Zhu +3 more

This paper reports the development of a low-latency arbitrary waveform generator (AWG), which is suitable for the control and measurement of superconducting quantum computers. It can generate qubit control signals and measurement signals in real time. Compared with commercial AWG, our AWG has less latency and higher analog bandwidth. Compressing latency can reduce system feedback time, and higher analog bandwidth improves the system's integration by mounting more qubits on the readout line. The AWG integrates four high-speed digital-to-analog converters (DACs), phase-locked loop (PLL) circuits, field-programmable gate arrays (FPGAs), and related circuits into a standard PXI 3U board. The waveform generator module, communication interface module, clock module, and configuration module are realized utilizing the FPGA. The FPGA-based hardware architecture enables AWG to be flexibly configured to meet the various needs of quantum experiments. The four-channel AWG has a 2-GSa/s sampling rate, a 14-bit resolution, and 500 MHz bandwidth. The jitter in the AWG output waveform is approximately 3 ps; the latency of the AWG (the time from the feedback trigger received until a feedback pulse is generated) is approximately 55 ns. These designs form the basis of realizing control system for large-scale quantum computing.

IEEE International Instrumentation and Measurement Technology Conference•May 17, 2021•5 citations

High Performance and Scalable AWG for Superconducting Quantum Computing

Jin Lin, Futian Liang, Yu Xu +4 more

Superconducting quantum computer is manufactured based on semiconductor process which makes qubits integration possible. At the same time, this kind of qubit exhibits high performance fidelity, de-coherence time, scalability and requires a programmable arbitrary waveform generator (AWG). This paper presents implementation of an AWG which composed of two gigabit samples per second (GSPS) sampling rate, 16 bit vertical resolution digital to analog converters (DACs). The AWG integrated with separate microwave devices onto a metal plate for the scale-up consideration. A special waveform sequence output controller is designed to realize seamless waveform switching and arbitrary waveform generator. The jitter in multiple AWG channels is around 10ps, Integral nonlinearity (INL) as well as differential nonlinearity (DNL) is about 2 LSB, and the qubit performance of the de-coherence time (T2*) achieved 33% promotion over that of a commercial 1 GSPS, 14 bit AWG.

arXiv:1806.03660•Jun 10, 2018•4 citations

Direct digital synthesis of microwave waveforms for quantum computing

James J. Raftery, Andrei Vrajitoarea, G. Zhang +3 more

Current state of the art quantum computing experiments in the microwave regime use control pulses generated by modulating microwave tones with baseband signals generated by an arbitrary waveform generator (AWG). Recent advances in digital analog conversion technology have made it possible to directly synthesize arbitrary microwave pulses with sampling rates up to 92 gigasamples per second (GS/s). These new high bandwidth AWG's could dramatically simplify the classical control chain for quantum computing experiments, enabling more advanced pulse shaping and reducing the number of components that need to be carefully calibrated. Here we use a high speed AWG to study the viability of such a simplified scheme. We characterize the AWG and perform randomized benchmarking of a superconducting qubit, achieving average single qubit gate error rates below $5\times10^{-4}$.

arXiv:1703.00942•Mar 2, 2017•15 citations

Application of RFSoC-based arbitrary waveform generator for coherent control of atomic qubits

Kazunori Maetani, Akinori Machino, Keisuke Koike +7 more

Abstract This study evaluates an AMD Zynq Ultrascale+ RF System-on-Chip (RFSoC) as an arbitrary waveform generator (AWG) for controlling atomic qubits coherently. We explore the advantages of using an RFSoC-based AWG for atomic qubit manipulation and experimentally demonstrate its utility in quantum computing. Our findings demonstrate that RFSoC is a scalable solution for developing large-scale quantum computers with atomic qubits, offering a promising approach for applications.

Japanese Journal of Applied Physics•Apr 19, 2024•2 citations
Abstract Quantum computing is an emerging technology which will influence the future. Quantum computing is currently limited by the scalability of qubits, especially the qubits manipulation of superconducting computing. In this paper, a superconducting qubits manipulation method based on AWG (Arbitrary Waveform Generator) is proposed. Based on the superconducting quantum computing system, the overall scheme of qubits manipulation is presented, including overall framework, multichannel coherent arbitrary waveform generation design, quantum state reading and acquisition design, multichannel synchronization design and quick feedback transceiver design. The simulation and experiment results show that the proposed method has good scalability, high synchronization index and good signal quality, which can meet the requirements of superconducting quantum computing for qubits manipulation.
Superconducting quantum processors are manufactured based on a semiconductor process, which makes qubit integration possible. At the same time, this kind of qubit exhibits high-performance fidelity and decoherence time and requires a programmable arbitrary waveform generator (AWG). This paper presents the implementation of an AWG with a sampling rate of two-gigabit samples per second as well as 16-bit vertical resolution digital-to-analog converters. The AWGs are designed for a scaled-up usage scenario by integrating them with separate microwave devices onto a single backplane. A special waveform sequence output controller is designed to realize seamless waveform switching and arbitrary waveform generation. The jitter of multiple AWG channels is around 10 ps, and the integral nonlinearity and differential nonlinearity are both about 2 least significant bits. This customizable AWG has been used in several superconducting quantum processors, and the result of multiple qubits’ measurement verifies that the AWG is qualified for controlling tens of superconducting qubits.
Being important parts of the superconducting quantum computer, the high-speed arbitrary waveform generator (AWG), ultraprecision dc source, and high-speed digitizer are used to manipulate the qubit. The complexity of an experimental setup increases rapidly as the number of qubits grows. Cumbersome instrument management, distortion of signals, and inefficiency of data transmission are gradually highlighted and become the bottlenecks in scaling up the number of qubits. In addition, fault-tolerant quantum computing has real-time feedback requirements of qubit states. To deal with these challenges, we propose an instrument management software design in this paper. The software maps the resources of separate instruments to a unified virtual instrument, achieving the scalability of the instruments. The processing and correction of signals are deployed on a server, which automatically corrects the distortion of the signals. By designing a multi-threaded mechanism for the AWG and a custom-defined data-link protocol for the digitizer, the efficiency of the software meets the requirements of experiments. Cooperating with the AWG and digitizer, the software provides the real-time feedback capability using an instruction compiler. Thus, the software meets the requirements of superconducting quantum computing, as demonstrated through its application to a 12-bit quantum experiment.
This paper reports the development of a low-latency arbitrary waveform generator (AWG), which is suitable for the control and measurement of superconducting quantum computers. It can generate qubit control signals and measurement signals in real time. Compared with commercial AWG, our AWG has less latency and higher analog bandwidth. Compressing latency can reduce system feedback time, and higher analog bandwidth improves the system's integration by mounting more qubits on the readout line. The AWG integrates four high-speed digital-to-analog converters (DACs), phase-locked loop (PLL) circuits, field-programmable gate arrays (FPGAs), and related circuits into a standard PXI 3U board. The waveform generator module, communication interface module, clock module, and configuration module are realized utilizing the FPGA. The FPGA-based hardware architecture enables AWG to be flexibly configured to meet the various needs of quantum experiments. The four-channel AWG has a 2-GSa/s sampling rate, a 14-bit resolution, and 500 MHz bandwidth. The jitter in the AWG output waveform is approximately 3 ps; the latency of the AWG (the time from the feedback trigger received until a feedback pulse is generated) is approximately 55 ns. These designs form the basis of realizing control system for large-scale quantum computing.
Superconducting quantum computer is manufactured based on semiconductor process which makes qubits integration possible. At the same time, this kind of qubit exhibits high performance fidelity, de-coherence time, scalability and requires a programmable arbitrary waveform generator (AWG). This paper presents implementation of an AWG which composed of two gigabit samples per second (GSPS) sampling rate, 16 bit vertical resolution digital to analog converters (DACs). The AWG integrated with separate microwave devices onto a metal plate for the scale-up consideration. A special waveform sequence output controller is designed to realize seamless waveform switching and arbitrary waveform generator. The jitter in multiple AWG channels is around 10ps, Integral nonlinearity (INL) as well as differential nonlinearity (DNL) is about 2 LSB, and the qubit performance of the de-coherence time (T2*) achieved 33% promotion over that of a commercial 1 GSPS, 14 bit AWG.
Current state of the art quantum computing experiments in the microwave regime use control pulses generated by modulating microwave tones with baseband signals generated by an arbitrary waveform generator (AWG). Recent advances in digital analog conversion technology have made it possible to directly synthesize arbitrary microwave pulses with sampling rates up to 92 gigasamples per second (GS/s). These new high bandwidth AWG's could dramatically simplify the classical control chain for quantum computing experiments, enabling more advanced pulse shaping and reducing the number of components that need to be carefully calibrated. Here we use a high speed AWG to study the viability of such a simplified scheme. We characterize the AWG and perform randomized benchmarking of a superconducting qubit, achieving average single qubit gate error rates below 5×10−45\times10^{-4}5×10−4.