Abstract Quantum-optical research on semiconductor single-photon sources puts special emphasis on the measurement of the second-order correlation function g (2) ( τ ), arguing that g (2) (0) < 1/2 implies the source field represents a good single-photon light source. We analyze the gain of information from g (2) (0) with respect to single photons. Any quantum state, for which the second-order correlation function falls below 1/2, has a nonzero projection on the single-photon Fock state. The amplitude p of this projection is arbitrary, independent of g (2) (0). However, one can extract a lower bound on the single-to-multi-photon-projection ratio. A vacuum contribution in the quantum state of light artificially increases the value of g (2) (0), cloaking actual single-photon projection. Thus, we propose an effective second-order correlation function g ˜ ( 2 ) ( 0 ) , which takes the influence of vacuum into account and also yields lower and upper bounds on p . We consider the single-photon purity as a standard figure of merit in experiments, reinterpret it within our results and provide an effective version of that physical quantity. Besides comparing different experimental and theoretical results, we also provide a possible measurement scheme for determining g ˜ ( 2 ) ( 0 ) .
Abstract Quantum-optical research on semiconductor single-photon sources puts special emphasis on the measurement of the second-order correlation function g (2) ( τ ), arguing that g (2) (0) < 1/2 implies the source field represents a good single-photon light source. We analyze the gain of information from g (2) (0) with respect to single photons. Any quantum state, for which the second-order correlation function falls below 1/2, has a nonzero projection on the single-photon Fock state. The amplitude p of this projection is arbitrary, independent of g (2) (0). However, one can extract a lower bound on the single-to-multi-photon-projection ratio. A vacuum contribution in the quantum state of light artificially increases the value of g (2) (0), cloaking actual single-photon projection. Thus, we propose an effective second-order correlation function g ˜ ( 2 ) ( 0 ) , which takes the influence of vacuum into account and also yields lower and upper bounds on p . We consider the single-photon purity as a standard figure of merit in experiments, reinterpret it within our results and provide an effective version of that physical quantity. Besides comparing different experimental and theoretical results, we also provide a possible measurement scheme for determining g ˜ ( 2 ) ( 0 ) .
Estimating the quality of a single-photon source is crucial for its use in quantum technologies. The standard test for semiconductor sources is a value of the second-order correlation function of the emitted field below 1/2 at zero time delay. This criterion alone provides no information regarding the amplitude of the single-photon contribution for general quantum states. Addressing this question requires the knowledge of additional observables. We derive an effective second-order correlation function, strongly connected to the Mandel-Q parameter and given in terms of both the second-order correlation and the average photon number, that provides a lower bound on the single-to-multiphoton projection ratio. Using both observables individually allows for lower and upper bounds for the single-photon projection. Comparing the tightness of our bounds with those in the literature, we find that relative bounds may be better described using the average photon number, while absolute bounds for low excitation states are tighter using the vacuum projection. Our results show that estimating the quality of a single-photon source based on additional information is very much dependent on what aspect of the quantum state of light one is interested in.
High-order photon correlations of light fields are important for characterizing the quantum nature. Since Hanbury Brown and Twiss conducted the pioneering experiments in the 1950s, the HBT effect has inspired extensive research on high-order photon correlation in quantum optics, quantum information, and quantum imaging. The Single-photon counting module is one of the most widely used single-photon detectors. Due to its high detection efficiency and low dark counts in the visible and near-infrared region, it is reasonably chosen for basic research on quantum mechanics. Many researches have demonstrated that the maximum value of second-order photon correlation g(2)(τ) at zero delay (τ = 0) can be used to distinguish different light fields. Therefore, the HBT scheme containing two single photon detectors have been widely used in many advanced studies, such as space interference, ghost imaging, single photon detection with high efficiency, etc. However, higher-order photon correlations g(n) (n > 2) can reveal more measurable characteristics of light fields, such as information about the non-Gaussian scattering process, the skewness and kurtosis of photon number distribution, etc. When the extended HBT scheme is used to measure higher-order photon correlations, the experimental conditions including quantum efficiency and background noise greatly affect the photon correlation measurement. The influences of the counting rate and resolution time of the detection system on the measurements are also very important and cannot be ignored. Therefore, the comprehensive considering of various influence factors is necessary for accurately measuring the high-order photon correlations and also a challenge. In this paper, we present a method based on double Hanbury Brown-Twiss scheme for the accurate measuring of high-order photon correlations g(n) (n > 2). The system consists of four single photon counting modules and is used to detect and analyze the joint distribution probability of temporal photon correlation. Considering the effects of the background noise and overall efficiency, theoretically, we analyze the correlations of the third- and fourth-order photon with the incident light intensity, squeezing parameter and photon number respectively for thermal state, coherent state, squeezed vacuum state, and Fock state. Meanwhile, experimentally we study the influences of resolution time and counting rate on correlations of the coherent state and thermal state with third- and fourth-order photon. On condition that the resolution time is 210 ns and the counting rate is 80 kc/s, the correlations of third and fourth-order photon with the thermal state at zero time delay are accurately measured, and the relative statistical deviations of the measured vales from the theoretical values are 0.3% and 0.8%, respectively. In addition, the third- and fourth-order photon correlations of the thermal state at different delay times are also observed. It is demonstrated that the high-order photon correlations of light fields are measured accurately by comprehensively analyzing various influencing factors. This technique provides a promising and useful tool to investigate quantum correlated imaging and quantum coherence of light fields.
As single-photon sources become more mature and are used more often in quantum information, communications and measurement applications, their characterization becomes more important. Single-photon-like light is often characterized by its brightness, and two quantum properties: the single-photon composition and the photon indistinguishability. While it is desirable to obtain these quantities from a single measurement, currently two or more measurements are required. Here, we simultaneously determine the brightness, the single photon purity, the indistinguishability, and the statistical distribution of Fock states to third order for a quantum light source. The measurement uses a pair of two-photon (n = 2) number-resolving detectors. n > 2 number-resolving detectors provide no additional advantage in the single-photon characterization. The new method extracts more information per experimental trial than a conventional measurement for all input states, and is particularly more e cient for statistical mixtures of photon states. Thus, using this n=2, number- resolving detector scheme will provide advantages in a variety of quantum optics measurements and systems.
Single photons are the smallest excitation states of the elctromagnetic field. They can be experimentally created but there is no apparatus that performs this task with 100% efficiency. Many techniques and theorems of optical quantum information theory use single photons. In order to utilize them for information processing, it is reasonable to know if they had been successfully produced. In other words: One needs heralded single photons. How to achieve this, is the main result of this diploma thesis. The task has been to improve the efficiency of already existing single photon sources. An apparatus had to be found which postprocesses the output of such sources in order to either herald the photons or at least to improve the efficiency. This apparatus is explicitly allowed to use other optical sources, for example coherent states (laser). The situation has been formally represented by the assumption that single photon sources produce a mixture of vacuum and the single photon state. It is known that experimental set-ups also create higher photon contributions. These contributions are considered to be small in corresponding publications. For some cases they even seem to vanish at all. One can distinguish two regimes concerning the techniques which have been used in this work: linear and nonlinear optics. Linear optical tools, for example the beam splitter, do not absorb photons in the ideal case, but it is not easy to implement useful transformations by their means. Absorption and weak coupling are drawbacks which arise mainly in nonlinear optical media. This work shows that the interactions two-photon absorption and cross phase modulation can be used in schemes, which enable the heralding of single photons. Already there are some linear optical quantum gates which manipulate optical states by means of single photons. Photons do not interact with each other directly, in contrast to electrons for example. Therefore quantum gates which act on more than one mode are interesting. The effective interaction of these gates is not quitecomparable to unitary dynamics. Moreover, these gates do not function in each case. Measurements required in auxiliary modes yield different results for each single case and in order to obtain the desired effect the cases have to be selected according to the measurement results. It has been investigated, how such gates perform if they have statistical mixtures as a resource instead of perfect single-photon states. Yet, no improvement of the single-photon contribution has been accomplished by means of these apparatuses. Hereby it has not been disproved that it is possible to achieve this goal using other apparatuses and techniques of linear optics. Yet, it has been shown that an enhancement is possible but then a non-vanishing two-photon contribution is appended. One of the most basic quantum gates is the conditional sign flip. The optical 8 interaction cross phase modulation acts in quite the same way considering only single photons. This effect enables the heralding of single photons in the ideal case. Within this work it has been shown that a Mach-Zehnder interferometer, a cross phase modulating medium and a photo-detector can be employed for this purpose. One could use any source of light as input to the interferometer but a strong coherent state (laser) may be preferred for the purpose of enhancing the interaction. The absorption of two-photon states is another non-linear effect. Astonishingly this effect serves to generate a heralded single-photon state given two imperfect single-photon sources. First the photon adding tool is employed which consists of a beam splitter and a photo-detector. By means of that and the statistical mixtures of two single-photon sources one creates a mixture which contains vacuum, the single-photon state and additionally the two-photon Fock state. This mixture propagates through a Mach-Zehnder interferometer. The interferometer is adjusted such that it is transparent for incoming light. In addition to the interferometer alone a two-photon absorbing medium is placed in one of its arms. For this reason there is a chance that the two-photon contribution entering the interferometer is absorbed within this medium. We cannot exclude this unfortunate case. A detector is placed in one of the two output modes. The interferometer is adjusted such that the single photon state does not leave in the mode in which the detector is placed, but always in the other mode. The detector can only click if the two-photon state propagates through the interferometer and if it is not destroyed in the absorbing medium. If the detector then receives one photon it is obvious that another one must leave in the other mode. The whole phenomenon is very similar to the concept of null measurement. Although not a main result, it has been shown here that the so-called Hong-Ou-Mandel effect can be generalized. It has been proven that the beam splitter transforms Fock states with equal Fock number into superpositions of Fock numbers which are even in each mode. Another effect on special odd Fock states is conjectured.
Single-photon-counting modules (SPCM's), with their high quantum efficiency, have been widely used to investigate effectively the photon statistics of various light sources, such as the single-photon state and emission light from controlled molecules, atoms, and quantum dots. However, such SPCM's cannot distinguish the arrivals of one photon and two (or more than two) photons at a moment, which makes measurement correction in real experiments. We analyze the effect of SPCM's on photon statistics based on the Hanbury-Brown-Twiss configuration when the total efficiency and background are considered, and it shows that the measured second-order degree of coherence and Mandel Q factor for different quantum states, including single-photon states and squeezed vacuum states, are corrected in different forms. A way of determining the squeezing of a squeezed vacuum state based on single-photon detection is presented.
With the progress of optical detection technology, the classical diffraction limit raised a hundred years ago has been continuously broken through. In previous experiments within fluorescence sources, one of the techniques used is detecting auto-correlation functions. The image is reconstructed by single-photon and multi-photon detecting intensities. By taking the joint intensity of more than one single-photon detectors into consideration, the point spread function of each photon emitter can be resolved even when the distance of their central position is below the classical diffraction limit. However, the measurement precision is not considered. In actual detecting process the detectors are imperfect, they have quantum detecting efficiency η and even can not count the photon numbers during one absorbing process. Therefore, we analyze the detecting intensity of each detector separately and use the total Fisher information to depict the resolution. Higher Fisher information is obtained when second order correlation function is considered and higher detecting efficiency is beneficial to the Fisher information enhancement, meanwhile the Cramèr-Rao bound for an effective distance resolving is lower than the classical diffraction limits. Furthermore, when the emitted photons are coherent states, the resolution ability can be enhanced with infinite single-photon detectors.