Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1710.01998 · EPJ Quantum Technology

Quality factor of a transmission line coupled coplanar waveguide resonator

Ilya S. Besedin, Alexey P. Menushenkov

Published Jan 22, 2018• 25 citations
arXivHTMLPDF

Abstract

We investigate analytically the coupling of a coplanar waveguide resonator to a coplanar waveguide feedline. Using a conformal mapping technique we obtain an expression for the characteristic mode impedances and coupling coefficients of an asymmetric multi-conductor transmission line. Leading order terms for the external quality factor and frequency shift are calculated. The obtained analytical results are relevant for designing circuit-QED quantum systems and frequency division multiplexing of superconducting bolometers, detectors and similar microwave-range multi-pixel devices.

DOI
10.1140/epjqt/s40507-018-0066-3

Related papers

A Versatile Analytical Model for Fast and Accurate Determination of Feedline-Coupled Resonators for Superconducting Qubit Readout

Zhen Luo, Lea Richard, Ivan Tsitsilin +4 more

Superconducting quantum chips commonly utilize quarter-wavelength (λ/4) transmission line resonators as readout circuits. An analytical model for the accurate determination of resonance frequencies and coupling Q-factors of feedline-coupled superconducting resonators is introduced. The model leverages four-port microwave network analysis, integrating boundary conditions and conformal mapping techniques to compute even- and odd-mode impedances in edge-coupled coplanar waveguide (CPW) structures. Its versatility allows application to both planar and 3-D heterogeneous architectures, making it a powerful tool for resonator design. To validate the model, a test chip with λ/4 resonators of varying geometries is fabricated and measured in a cryogenic environment. Comparisons with finite element method (FEM) simulations and experimental measurements confirm the model's accuracy, with resonance frequencies and coupling Q-factors aligning closely across configurations. This proposed model facilitates the design of superconducting resonators in readout circuits for more effective, scalable, and adaptable quantum computing architectures.

quant-pharXiv:2607.00490•IEEE Transactions on Microwave Theory and Techniques•Jul 2, 2026•1 citation

Coplanar waveguide resonators for circuit quantum electrodynamics

M. Göppl, A. Fragner, Matthias Baur +7 more

High quality on-chip microwave resonators have recently found prominent new applications in quantum optics and quantum information processing experiments with superconducting electronic circuits, a field now known as circuit quantum electrodynamics (QED). They are also used as single photon detectors and parametric amplifiers. Here we analyze the physical properties of coplanar waveguide resonators and their relation to the materials properties for use in circuit QED. We have designed and fabricated resonators with fundamental frequencies from 2 to 9 GHz and quality factors ranging from a few hundreds to a several hundred thousands controlled by appropriately designed input and output coupling capacitors. The microwave transmission spectra measured at temperatures of 20 mK are shown to be in good agreement with theoretical lumped element and distributed element transmission matrix models. In particular, the experimentally determined resonance frequencies, quality factors, and insertion losses are fully and consistently explained by the two models for all measured devices. The high level of control and flexibility in design renders these resonators ideal for storing and manipulating quantum electromagnetic fields in integrated superconducting electronic circuits.

arXiv:0807.4094•Journal of Applied Physics•Dec 1, 2008•370 citations

Experimental demonstrations of high-Q superconducting coplanar waveguide resonators

HaiJie Li, YiWen Wang, LianFu Wei +6 more

We successfully designed and fabricated an absorption-type of superconducting coplanar waveguide (CPW) resonators. The resonators are made from a niobium film (about 160 nm thick) on a high-resistance Si substrate, and each resonator is fabricated as a meandered quarter-wavelength transmission line (one end is short to the ground and another end is capacitively coupled to a through feedline). With a vector network analyzer we measured the transmissions of the applied microwave through the resonators at ultra-low temperature. The obtained loaded quality factors are significantly high, i.e. up to ∼10 6 . When the temperature increases slowly from the base temperature (20 mK), the resonance frequencies of the resonators are blue shifted and the quality factors are lowered slightly. In principle, this type of device can integrate a series of CPW resonators with a common feedline, making it a promising candidate as the data bus for coupling distant solid-state qubits and the sensitive detector of single photons.

arXiv:1304.3254•Chinese Science Bulletin•Jul 1, 2013•29 citations

Superconducting coplanar waveguide resonators for detector applications

G. Hammer, S. Wünsch, M. Roesch +3 more

The use of a transmission line resonator offers the possibility for different sensor readout methods, e.g. flux qubit and kinetic inductance detectors. Both cases require a high quality factor, Q L , of the cavity circuit to detect small deviations in the resonance frequency. Various superconducting niobium coplanar waveguide resonators of λ/4 and λ/2 wavelength for 3 and 6 GHz were developed. Different layouts for the coplanar resonators were designed, simulated and measured on common silicon and sapphire substrates at 4.2 K. We found a very good agreement between simulation and measurement results, with Q L between 10 4 and 10 5 at helium temperatures. The presented results show the dependences on the chosen cross section geometries, the coupling factor and the complex layout of the transmission line.

Superconductor Science and Technology•Oct 18, 2007•19 citations

Fabrication and characterization of superconducting coplanar waveguide resonators

Bongkeon Kim, Minkyung Jung, Jihwan Kim +2 more

High-quality superconducting coplanar waveguide (SCPW) resonators are crucial for developing superconducting quantum information devices and sensors. We designed quarter-wavelength SCPW resonators and fabricated the SCPW resonators using Nb thin film. The resonant characteristics were measured at T = 4.2 K, revealing the intrinsic quality factor and the coupling quality factor to be Qi = 4,784 and Qc = 17, 980, respectively. Our design and fabrication techniques would be very useful to develop a gate-tunable superconducting qubit based on the semiconductor nanostructures.

•Dec 1, 2020•1 citation

Microwave Transmissions through Superconducting Coplanar Waveguide Resonators with Different Coupling Configurations

Zhang Si-Lei, Hai-Jie Li, Lian-Fu Wei +6 more

We design and fabricate two types of superconducting niobium coplanar waveguide microwave resonators with different coupling capacitors on high purity Si substrates. Their microwave transmissions are measured at 20 mK. It is found that these two types of resonators possess significantly different loaded quality factors; one is 5.6 × 10 3 and the other is 4.0 × 10 4 . The measured data are fitted well by classical ABCD matrix approach and consequently the coupling capacitances are determined. It is found that the transmission peak deviates from the standard Lorentizian with a frequency broadening.

Chinese Physics Letters•Aug 1, 2013•2 citations
We investigate analytically the coupling of a coplanar waveguide resonator to a coplanar waveguide feedline. Using a conformal mapping technique we obtain an expression for the characteristic mode impedances and coupling coefficients of an asymmetric multi-conductor transmission line. Leading order terms for the external quality factor and frequency shift are calculated. The obtained analytical results are relevant for designing circuit-QED quantum systems and frequency division multiplexing of superconducting bolometers, detectors and similar microwave-range multi-pixel devices.
Superconducting quantum chips commonly utilize quarter-wavelength (λ/4) transmission line resonators as readout circuits. An analytical model for the accurate determination of resonance frequencies and coupling Q-factors of feedline-coupled superconducting resonators is introduced. The model leverages four-port microwave network analysis, integrating boundary conditions and conformal mapping techniques to compute even- and odd-mode impedances in edge-coupled coplanar waveguide (CPW) structures. Its versatility allows application to both planar and 3-D heterogeneous architectures, making it a powerful tool for resonator design. To validate the model, a test chip with λ/4 resonators of varying geometries is fabricated and measured in a cryogenic environment. Comparisons with finite element method (FEM) simulations and experimental measurements confirm the model's accuracy, with resonance frequencies and coupling Q-factors aligning closely across configurations. This proposed model facilitates the design of superconducting resonators in readout circuits for more effective, scalable, and adaptable quantum computing architectures.
High quality on-chip microwave resonators have recently found prominent new applications in quantum optics and quantum information processing experiments with superconducting electronic circuits, a field now known as circuit quantum electrodynamics (QED). They are also used as single photon detectors and parametric amplifiers. Here we analyze the physical properties of coplanar waveguide resonators and their relation to the materials properties for use in circuit QED. We have designed and fabricated resonators with fundamental frequencies from 2 to 9 GHz and quality factors ranging from a few hundreds to a several hundred thousands controlled by appropriately designed input and output coupling capacitors. The microwave transmission spectra measured at temperatures of 20 mK are shown to be in good agreement with theoretical lumped element and distributed element transmission matrix models. In particular, the experimentally determined resonance frequencies, quality factors, and insertion losses are fully and consistently explained by the two models for all measured devices. The high level of control and flexibility in design renders these resonators ideal for storing and manipulating quantum electromagnetic fields in integrated superconducting electronic circuits.
We successfully designed and fabricated an absorption-type of superconducting coplanar waveguide (CPW) resonators. The resonators are made from a niobium film (about 160 nm thick) on a high-resistance Si substrate, and each resonator is fabricated as a meandered quarter-wavelength transmission line (one end is short to the ground and another end is capacitively coupled to a through feedline). With a vector network analyzer we measured the transmissions of the applied microwave through the resonators at ultra-low temperature. The obtained loaded quality factors are significantly high, i.e. up to ∼10 6 . When the temperature increases slowly from the base temperature (20 mK), the resonance frequencies of the resonators are blue shifted and the quality factors are lowered slightly. In principle, this type of device can integrate a series of CPW resonators with a common feedline, making it a promising candidate as the data bus for coupling distant solid-state qubits and the sensitive detector of single photons.
The use of a transmission line resonator offers the possibility for different sensor readout methods, e.g. flux qubit and kinetic inductance detectors. Both cases require a high quality factor, Q L , of the cavity circuit to detect small deviations in the resonance frequency. Various superconducting niobium coplanar waveguide resonators of λ/4 and λ/2 wavelength for 3 and 6 GHz were developed. Different layouts for the coplanar resonators were designed, simulated and measured on common silicon and sapphire substrates at 4.2 K. We found a very good agreement between simulation and measurement results, with Q L between 10 4 and 10 5 at helium temperatures. The presented results show the dependences on the chosen cross section geometries, the coupling factor and the complex layout of the transmission line.
High-quality superconducting coplanar waveguide (SCPW) resonators are crucial for developing superconducting quantum information devices and sensors. We designed quarter-wavelength SCPW resonators and fabricated the SCPW resonators using Nb thin film. The resonant characteristics were measured at T = 4.2 K, revealing the intrinsic quality factor and the coupling quality factor to be Qi = 4,784 and Qc = 17, 980, respectively. Our design and fabrication techniques would be very useful to develop a gate-tunable superconducting qubit based on the semiconductor nanostructures.
We design and fabricate two types of superconducting niobium coplanar waveguide microwave resonators with different coupling capacitors on high purity Si substrates. Their microwave transmissions are measured at 20 mK. It is found that these two types of resonators possess significantly different loaded quality factors; one is 5.6 × 10 3 and the other is 4.0 × 10 4 . The measured data are fitted well by classical ABCD matrix approach and consequently the coupling capacitances are determined. It is found that the transmission peak deviates from the standard Lorentizian with a frequency broadening.