Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1304.3254 · Chinese Science Bulletin

Experimental demonstrations of high-Q superconducting coplanar waveguide resonators

HaiJie Li, YiWen Wang, LianFu Wei, PinJia Zhou, Qiang Wei, ChunHai Cao, YuRong Fang, Yang Yu, PeiHeng Wu

Published Jul 1, 2013• 29 citations
arXivHTMLPDF

Abstract

We successfully designed and fabricated an absorption-type of superconducting coplanar waveguide (CPW) resonators. The resonators are made from a niobium film (about 160 nm thick) on a high-resistance Si substrate, and each resonator is fabricated as a meandered quarter-wavelength transmission line (one end is short to the ground and another end is capacitively coupled to a through feedline). With a vector network analyzer we measured the transmissions of the applied microwave through the resonators at ultra-low temperature. The obtained loaded quality factors are significantly high, i.e. up to ∼10 6 . When the temperature increases slowly from the base temperature (20 mK), the resonance frequencies of the resonators are blue shifted and the quality factors are lowered slightly. In principle, this type of device can integrate a series of CPW resonators with a common feedline, making it a promising candidate as the data bus for coupling distant solid-state qubits and the sensitive detector of single photons.

DOI
10.1007/s11434-013-5882-3

Related papers

Development of high quality superconducting resonators for quantum device applications

Dong-Gwang Ha, Seon Hoo Kim, So-Yeon Jun +5 more

We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•0 citations

Low-loss superconducting aluminum microwave coplanar waveguide resonators on sapphires for the qubit readouts

Qing He, P. H. Ouyang, Haiyan Gao +7 more

Abstract The coplanar waveguide (CPW) microwave resonators have been widely applied for solid-state quantum computation and single-photon detection. Based on the physical analysis for the high fidelity readouts of the qubit(s), in this paper we design and then fabricate accordingly the desired aluminum (Al) film quarter-wavelength resonators on sapphire substrates. The ultra-low temperature measurement results show that the linearity of the internal quality factor under the proper driving power is satisfied well for the high fidelity readouts of the qubit(s); and the phase- and amplitude fractional frequency noises are significantly less for avoiding the potential information false alarms of the detected qubit during the readouts. With the demonstrated qubit-resonator experimental parameters, we argue that the designed and fabricated quarter-wavelength CPW resonators, with optimized parameters, can be used to implement the desired weakly perturbing readout measurements of the solid-state qubits on-chip.

Superconductor Science and Technology•Apr 25, 2022•11 citations

Characterizing Niobium Nitride-Based Superconducting Coplanar Waveguide Resonators for Microwave Hybrid Circuit Quantum Electrodynamics

Paniz Foshat, Paul Baity, Sergey Danilin +8 more

The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material for applications in superconducting quantum technology. However, NbN-based superconducting circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplanar waveguide resonator arrays with a 100 nm thickness, capacitively coupled to a common coplanar waveguide on a silicon chip. We observe that the resonators' internal quality factor ($Q_{i}$) decreases from$Q_{i}\sim 1.07\times 10^{6}$in a high power regime to$Q_{i}\sim 1.36\times 10^{5}$in the single photon regime. Data from this study is consistent with the TLS theory, which describes the TLS interactions in resonator substrates and interfaces. Moreover, we study the temperature ($T$) dependence of$Q_{i}$and resonance frequency$f_{r}$of coplanar waveguide resonators to characterize the quasiparticle density. We observe that the increase in kinetic inductance at higher temperatures is the main reason for the frequency shift. Finally, we measure$f_{r}$and$Q_{i}$in response to in-plane magnetic fields ($B_{||}$). We verify that$Q_{i}$stays well above$10^{4}$up to$B_{||}$= 240 mT in the photon number$< \! n_{ph} \! >$= 1.8 at$T$= 100 mK. Our results could enable the development of robust microwave superconducting circuits for circuit quantum electrodynamics at high magnetic fields required for hybrid superconducting-semiconducting quantum circuits.

IEEE Transactions on Applied Superconductivity•Jan 22, 2025•10 citations

Design and Modeling of Double-Fold Superconducting High-Q Coplanar Waveguide Resonators for Quantum Applications

Jagmohan Singh, Hongxiang Shen, Nobuyuki Yoshikawa +2 more

In this paper, we present a novel design of a compact, double-fold half-wave superconducting coplanar waveguide resonator, specifically optimized for quantum readout. The geometry offers advantages in terms of scalability and allows for a more compact integration of qubits per unit area. The superconducting resonators are designed to operate within a fundamental frequency range of 1.9 GHz$-$1.95 GHz, utilizing both gap and finger coupling schemes. The devices are fabricated using thin aluminum films deposited on high-resistivity sapphire substrates. The proposed resonators exhibit quality factor (Q$_{L}$) of 2.9 ×$ 10^{5}$and 1.58 ×$10^{3}$for gap coupled and finger coupled, respectively, during experimental measurements. The simulated Q$_{L}$of single-folded meander line resonators are found to be 4.65 ×$10^{5}$and 258.42, for gap coupled and finger coupled, respectively, for comparison purpose at similar operating frequency. A comprehensive analysis of the microwave transmission spectra was conducted at cryogenic temperatures near 10 mK, across very high input drive powers ($-$30 dBm to$-$10 dBm). Experimental results show a good agreement with simulations and the equivalent lumped circuit model. Notably, the proposed design reduces the physical footprint of the resonator devices up to 28.2$\%$compared to conventional single-fold meandered structures. The resonators demonstrate strong potential for integrating qubits with readout and control buses in quantum information processing which require a Q$_{L}$between$10^{4}$$-$$10^{5}$. They also being well-suited for cryogenic detector applications that utilize microwave kinetic inductance detector (MKID) arrays in frequency multiplexing for different coupling schemes.

IEEE Transactions on Applied Superconductivity•Sep 1, 2025•3 citations

Ultra high quality factor resonators for kinetic inductance detectors

G. Hammer, S. Wünsch, K. Ilin +1 more

The sensitivity of a kinetic inductance detector is determined by the performance of the cavity circuit and therefore a high quality factor and low phase noise are required. We developed superconducting niobium coplanar waveguide resonators for kinetic inductance detectors at a resonance frequency of 6 GHz. The length of the resonators is adjusted to a quarter of a wavelength which corresponds to ≈ 5.3 mm in our geometry. Different layouts with coplanar waveguide transmission line topology for the resonator were designed and simulated. Some parameters of the device fabrication process were varied. The niobium thin films were deposited by magnetron sputtering on sapphire substrates kept at ambient temperature. The resonators were patterned by photolithography and reactive ion etching and measured at helium temperatures. Because of the quarter wave geometry with one shorted end the reflection parameter was measured. We have studied the influence of the coupling capacitances on quality factor. The optimization includes microwave simulations and implementation in different resonator structures. The measurements of optimized devices showed a very high quality factor above one million (10 6 ). The obtained results and perspective on further development of resonators will be discussed.

Journal of Physics Conference Series•Feb 1, 2008•11 citations

Fabrication and characterization of superconducting coplanar waveguide resonators

Bongkeon Kim, Minkyung Jung, Jihwan Kim +2 more

High-quality superconducting coplanar waveguide (SCPW) resonators are crucial for developing superconducting quantum information devices and sensors. We designed quarter-wavelength SCPW resonators and fabricated the SCPW resonators using Nb thin film. The resonant characteristics were measured at T = 4.2 K, revealing the intrinsic quality factor and the coupling quality factor to be Qi = 4,784 and Qc = 17, 980, respectively. Our design and fabrication techniques would be very useful to develop a gate-tunable superconducting qubit based on the semiconductor nanostructures.

•Dec 1, 2020•1 citation
We successfully designed and fabricated an absorption-type of superconducting coplanar waveguide (CPW) resonators. The resonators are made from a niobium film (about 160 nm thick) on a high-resistance Si substrate, and each resonator is fabricated as a meandered quarter-wavelength transmission line (one end is short to the ground and another end is capacitively coupled to a through feedline). With a vector network analyzer we measured the transmissions of the applied microwave through the resonators at ultra-low temperature. The obtained loaded quality factors are significantly high, i.e. up to ∼10 6 . When the temperature increases slowly from the base temperature (20 mK), the resonance frequencies of the resonators are blue shifted and the quality factors are lowered slightly. In principle, this type of device can integrate a series of CPW resonators with a common feedline, making it a promising candidate as the data bus for coupling distant solid-state qubits and the sensitive detector of single photons.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.
Abstract The coplanar waveguide (CPW) microwave resonators have been widely applied for solid-state quantum computation and single-photon detection. Based on the physical analysis for the high fidelity readouts of the qubit(s), in this paper we design and then fabricate accordingly the desired aluminum (Al) film quarter-wavelength resonators on sapphire substrates. The ultra-low temperature measurement results show that the linearity of the internal quality factor under the proper driving power is satisfied well for the high fidelity readouts of the qubit(s); and the phase- and amplitude fractional frequency noises are significantly less for avoiding the potential information false alarms of the detected qubit during the readouts. With the demonstrated qubit-resonator experimental parameters, we argue that the designed and fabricated quarter-wavelength CPW resonators, with optimized parameters, can be used to implement the desired weakly perturbing readout measurements of the solid-state qubits on-chip.
The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material for applications in superconducting quantum technology. However, NbN-based superconducting circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplanar waveguide resonator arrays with a 100 nm thickness, capacitively coupled to a common coplanar waveguide on a silicon chip. We observe that the resonators' internal quality factor (QiQ_{i}Qi​) decreases fromQi∼1.07×106Q_{i}\sim 1.07\times 10^{6}Qi​∼1.07×106in a high power regime toQi∼1.36×105Q_{i}\sim 1.36\times 10^{5}Qi​∼1.36×105in the single photon regime. Data from this study is consistent with the TLS theory, which describes the TLS interactions in resonator substrates and interfaces. Moreover, we study the temperature (TTT) dependence ofQiQ_{i}Qi​and resonance frequencyfrf_{r}fr​of coplanar waveguide resonators to characterize the quasiparticle density. We observe that the increase in kinetic inductance at higher temperatures is the main reason for the frequency shift. Finally, we measurefrf_{r}fr​andQiQ_{i}Qi​in response to in-plane magnetic fields (B∣∣B_{||}B∣∣​). We verify thatQiQ_{i}Qi​stays well above10410^{4}104up toB∣∣B_{||}B∣∣​= 240 mT in the photon number< ⁣nph ⁣>< \! n_{ph} \! ><nph​>= 1.8 atTTT= 100 mK. Our results could enable the development of robust microwave superconducting circuits for circuit quantum electrodynamics at high magnetic fields required for hybrid superconducting-semiconducting quantum circuits.
In this paper, we present a novel design of a compact, double-fold half-wave superconducting coplanar waveguide resonator, specifically optimized for quantum readout. The geometry offers advantages in terms of scalability and allows for a more compact integration of qubits per unit area. The superconducting resonators are designed to operate within a fundamental frequency range of 1.9 GHz$-1.95GHz,utilizingbothgapandfingercouplingschemes.Thedevicesarefabricatedusingthinaluminumfilmsdepositedonhigh−resistivitysapphiresubstrates.Theproposedresonatorsexhibitqualityfactor(Q1.95 GHz, utilizing both gap and finger coupling schemes. The devices are fabricated using thin aluminum films deposited on high-resistivity sapphire substrates. The proposed resonators exhibit quality factor (Q1.95GHz,utilizingbothgapandfingercouplingschemes.Thedevicesarefabricatedusingthinaluminumfilmsdepositedonhigh−resistivitysapphiresubstrates.Theproposedresonatorsexhibitqualityfactor(Q_{L})of2.9×) of 2.9 ×)of2.9× 10^{5}$and 1.58 ×10310^{3}103for gap coupled and finger coupled, respectively, during experimental measurements. The simulated QL_{L}L​of single-folded meander line resonators are found to be 4.65 ×10510^{5}105and 258.42, for gap coupled and finger coupled, respectively, for comparison purpose at similar operating frequency. A comprehensive analysis of the microwave transmission spectra was conducted at cryogenic temperatures near 10 mK, across very high input drive powers ($-30dBmto30 dBm to30dBmto-10dBm).Experimentalresultsshowagoodagreementwithsimulationsandtheequivalentlumpedcircuitmodel.Notably,theproposeddesignreducesthephysicalfootprintoftheresonatordevicesupto28.210 dBm). Experimental results show a good agreement with simulations and the equivalent lumped circuit model. Notably, the proposed design reduces the physical footprint of the resonator devices up to 28.210dBm).Experimentalresultsshowagoodagreementwithsimulationsandtheequivalentlumpedcircuitmodel.Notably,theproposeddesignreducesthephysicalfootprintoftheresonatordevicesupto28.2\%comparedtoconventionalsingle−foldmeanderedstructures.TheresonatorsdemonstratestrongpotentialforintegratingqubitswithreadoutandcontrolbusesinquantuminformationprocessingwhichrequireaQcompared to conventional single-fold meandered structures. The resonators demonstrate strong potential for integrating qubits with readout and control buses in quantum information processing which require a Qcomparedtoconventionalsingle−foldmeanderedstructures.TheresonatorsdemonstratestrongpotentialforintegratingqubitswithreadoutandcontrolbusesinquantuminformationprocessingwhichrequireaQ_{L}$between10410^{4}104−-−10510^{5}105. They also being well-suited for cryogenic detector applications that utilize microwave kinetic inductance detector (MKID) arrays in frequency multiplexing for different coupling schemes.
The sensitivity of a kinetic inductance detector is determined by the performance of the cavity circuit and therefore a high quality factor and low phase noise are required. We developed superconducting niobium coplanar waveguide resonators for kinetic inductance detectors at a resonance frequency of 6 GHz. The length of the resonators is adjusted to a quarter of a wavelength which corresponds to ≈ 5.3 mm in our geometry. Different layouts with coplanar waveguide transmission line topology for the resonator were designed and simulated. Some parameters of the device fabrication process were varied. The niobium thin films were deposited by magnetron sputtering on sapphire substrates kept at ambient temperature. The resonators were patterned by photolithography and reactive ion etching and measured at helium temperatures. Because of the quarter wave geometry with one shorted end the reflection parameter was measured. We have studied the influence of the coupling capacitances on quality factor. The optimization includes microwave simulations and implementation in different resonator structures. The measurements of optimized devices showed a very high quality factor above one million (10 6 ). The obtained results and perspective on further development of resonators will be discussed.
High-quality superconducting coplanar waveguide (SCPW) resonators are crucial for developing superconducting quantum information devices and sensors. We designed quarter-wavelength SCPW resonators and fabricated the SCPW resonators using Nb thin film. The resonant characteristics were measured at T = 4.2 K, revealing the intrinsic quality factor and the coupling quality factor to be Qi = 4,784 and Qc = 17, 980, respectively. Our design and fabrication techniques would be very useful to develop a gate-tunable superconducting qubit based on the semiconductor nanostructures.