Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1703.10195 · Applied Physics Letters

Al transmon qubits on silicon-on-insulator for quantum device integration

Andrew J. Keller, Paul B. Dieterle, Michael Fang, Brett Berger, J. M. Fink, Oskar J. Painter

Published Jul 24, 2017• 30 citations
arXivHTMLPDF

Abstract

We present the fabrication and characterization of an aluminum transmon qubit on a silicon-on-insulator substrate. Key to the qubit fabrication is the use of an anhydrous hydrofluoric vapor process which selectively removes the lossy silicon oxide buried underneath the silicon device layer. For a 5.6 GHz qubit measured dispersively by a 7.1 GHz resonator, we find T1 = 3.5 μs and T2* = 2.2 μs. This process in principle permits the co-fabrication of silicon photonic and mechanical elements, providing a route towards chip-scale integration of electro-opto-mechanical transducers for quantum networking of superconducting microwave quantum circuits. The additional processing steps are compatible with established fabrication techniques for aluminum transmon qubits on silicon.

DOI
10.1063/1.4994661

Related papers

Manufacturing of Superconducting Qubits Using Nb/Al-AlO x /Nb Josephson Junctions on Silicon Substrate

Qingjian Li, Y. F. Wu, Zhengqi Niu +4 more

Superconducting qubits stand as a pivotal platform for quantum computing, where scalable fabrication is crucial for building complex quantum circuits. Here, we develop a fabrication process for Nb/Al-AlOx/Nb tri-layer Josephson junctions on 4-inch silicon wafers using full-stepper lithography. Utilizing this process, we have produced both transmon and C-shunt flux qubits. The well-behavedI-Vcharacteristics of junction arrays containing up to 1000 junctions highlight the excellent uniformity and scalability of our process. Furthermore, by introducing a RIE pre-etch before BOE treatment to remove most of the SiO2insulator, we have suppressed dielectric loss and increased the coherence time of the Nb-based transmon qubit by almost 10 times, achieving a quality factor comparable to state-of-the-art Nb-based qubits on sapphire substrates. Given its compatibility with silicon technology, our method paves the way for the integration of multi-qubit processors and the co-fabrication of complex quantum circuits.

IEEE Transactions on Applied Superconductivity•Jan 28, 2026•1 citation

Native-oxide-passivated trilayer junctions for superconducting qubits

Pankaj Sethi, Om Prakash, Jukka-Pekka Kaikkonen +15 more

Superconducting qubits in today's quantum processing units are typically fabricated with angle-evaporated aluminum--aluminum-oxide--aluminum Josephson junctions. However, there is an urgent need to overcome the limited reproducibility of this approach when scaling up the number of qubits and junctions. Fabrication methods based on subtractive patterning of superconductor--insulator--superconductor trilayers, used for more classical large-scale Josephson junction circuits, could provide the solution but they in turn often suffer from lossy dielectrics incompatible with high qubit coherence. In this work, we utilize native aluminum oxide as a sidewall passivation layer for junctions based on aluminum--aluminum-oxide--niobium trilayers, and use such junctions in qubits. We design the fabrication process such that the few-nanometer-thin native oxide is not exposed to oxide removal steps that could increase its defect density or hinder its ability to prevent shorting between the leads of the junction. With these junctions, we design and fabricate transmon-like qubits and measure time-averaged coherence times up to 30 $μ$s at a qubit frequency of 5 GHz, corresponding to a qubit quality factor of one million. Our process uses subtractive patterning and optical lithography on wafer scale, enabling high throughput in patterning. This approach provides a scalable path toward fabrication of superconducting qubits on industry-standard platforms.

arXiv:2504.03481•Physical Review Applied•Nov 26, 2025•6 citations

Improving the performance of transmon qubits with fluorine-based surface treatments

Michael Gingras, Bethany M. Niedzielski, Kevin A. Grossklaus +21 more

Reducing materials and processing-induced decoherence is critical to the development of utility-scale quantum processors based on superconducting qubits. Here we report on the impact of two fluorine-based wet etches, which we use to treat the silicon surface underneath the Josephson junctions (JJs) of fixed-frequency transmon qubits made with aluminum base metallization. Using several materials analysis techniques, we demonstrate that these surface treatments can remove germanium residue introduced by our JJ fabrication with no other changes to the overall process flow. These surface treatments result in significantly improved energy relaxation times for the highest performing process, with median $T_1=334~μ$s, corresponding to quality factor $Q=6.6\times10^6$. This result suggests that the metal-substrate interface directly underneath the JJs was a major contributor to microwave loss in these transmon qubit circuits prior to integration of these surface treatments. Furthermore, this work illustrates how materials analysis can be used in conjunction with quantum device performance metrics to improve performance in superconducting qubits.

arXiv:2507.08089•Physical Review Applied•May 26, 2026•9 citations

Transmon Qubit Using Sn as a Junction Superconductor

Amrita Purkayastha, Amritesh Sharma, Param J. Patel +11 more

Superconductor qubits typically use aluminum–aluminum oxide tunnel junctions to provide the nonlinear inductance. Junctions with semiconductor barriers make it possible to vary the superconductor material and explore beyond aluminum. We use InAs semiconductor nanowires coated with thin superconducting shells of β-Sn to realize transmon qubits. By tuning the Josephson energy with a gate voltage, we adjust the qubit frequency over a range of 3 GHz. The longest energy relaxation time, T 1 = 27 μs, is obtained at the lowest qubit frequencies, while the longest echo dephasing time, T 2 = 1.8 μs, is achieved at higher frequencies. We assess the possible factors limiting coherence times in these devices and discuss steps to enhance performance through improvements in materials fabrication and circuit design.

arXiv:2508.04007•Nano Letters•Feb 9, 2026•4 citations

Free-standing silicon shadow masks for transmon qubit fabrication

I. Tsioutsios, Kyle Serniak, S. Diamond +6 more

Nanofabrication techniques for superconducting qubits rely on resist-based masks patterned by electron-beam or optical lithography. We have developed an alternative nanofabrication technique based on free-standing silicon shadow masks fabricated from silicon-on-insulator wafers. These silicon shadow masks not only eliminate organic residues associated with resist-based lithography, but also provide a pathway to better understand and control surface-dielectric losses in superconducting qubits by decoupling mask fabrication from substrate preparation. We have successfully fabricated aluminum 3D transmon superconducting qubits with these shadow masks and found coherence quality factors comparable to those fabricated with standard techniques.

arXiv:1911.05924•AIP Advances•Jun 1, 2020•25 citations

Development of high quality superconducting resonators for quantum device applications

Dong-Gwang Ha, Seon Hoo Kim, So-Yeon Jun +5 more

We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•0 citations
We present the fabrication and characterization of an aluminum transmon qubit on a silicon-on-insulator substrate. Key to the qubit fabrication is the use of an anhydrous hydrofluoric vapor process which selectively removes the lossy silicon oxide buried underneath the silicon device layer. For a 5.6 GHz qubit measured dispersively by a 7.1 GHz resonator, we find T1 = 3.5 μs and T2* = 2.2 μs. This process in principle permits the co-fabrication of silicon photonic and mechanical elements, providing a route towards chip-scale integration of electro-opto-mechanical transducers for quantum networking of superconducting microwave quantum circuits. The additional processing steps are compatible with established fabrication techniques for aluminum transmon qubits on silicon.
Superconducting qubits stand as a pivotal platform for quantum computing, where scalable fabrication is crucial for building complex quantum circuits. Here, we develop a fabrication process for Nb/Al-AlOx/Nb tri-layer Josephson junctions on 4-inch silicon wafers using full-stepper lithography. Utilizing this process, we have produced both transmon and C-shunt flux qubits. The well-behavedI-Vcharacteristics of junction arrays containing up to 1000 junctions highlight the excellent uniformity and scalability of our process. Furthermore, by introducing a RIE pre-etch before BOE treatment to remove most of the SiO2insulator, we have suppressed dielectric loss and increased the coherence time of the Nb-based transmon qubit by almost 10 times, achieving a quality factor comparable to state-of-the-art Nb-based qubits on sapphire substrates. Given its compatibility with silicon technology, our method paves the way for the integration of multi-qubit processors and the co-fabrication of complex quantum circuits.
Superconducting qubits in today's quantum processing units are typically fabricated with angle-evaporated aluminum--aluminum-oxide--aluminum Josephson junctions. However, there is an urgent need to overcome the limited reproducibility of this approach when scaling up the number of qubits and junctions. Fabrication methods based on subtractive patterning of superconductor--insulator--superconductor trilayers, used for more classical large-scale Josephson junction circuits, could provide the solution but they in turn often suffer from lossy dielectrics incompatible with high qubit coherence. In this work, we utilize native aluminum oxide as a sidewall passivation layer for junctions based on aluminum--aluminum-oxide--niobium trilayers, and use such junctions in qubits. We design the fabrication process such that the few-nanometer-thin native oxide is not exposed to oxide removal steps that could increase its defect density or hinder its ability to prevent shorting between the leads of the junction. With these junctions, we design and fabricate transmon-like qubits and measure time-averaged coherence times up to 30 μμμs at a qubit frequency of 5 GHz, corresponding to a qubit quality factor of one million. Our process uses subtractive patterning and optical lithography on wafer scale, enabling high throughput in patterning. This approach provides a scalable path toward fabrication of superconducting qubits on industry-standard platforms.
Reducing materials and processing-induced decoherence is critical to the development of utility-scale quantum processors based on superconducting qubits. Here we report on the impact of two fluorine-based wet etches, which we use to treat the silicon surface underneath the Josephson junctions (JJs) of fixed-frequency transmon qubits made with aluminum base metallization. Using several materials analysis techniques, we demonstrate that these surface treatments can remove germanium residue introduced by our JJ fabrication with no other changes to the overall process flow. These surface treatments result in significantly improved energy relaxation times for the highest performing process, with median T1=334 μT_1=334~μT1​=334 μs, corresponding to quality factor Q=6.6×106Q=6.6\times10^6Q=6.6×106. This result suggests that the metal-substrate interface directly underneath the JJs was a major contributor to microwave loss in these transmon qubit circuits prior to integration of these surface treatments. Furthermore, this work illustrates how materials analysis can be used in conjunction with quantum device performance metrics to improve performance in superconducting qubits.
Superconductor qubits typically use aluminum–aluminum oxide tunnel junctions to provide the nonlinear inductance. Junctions with semiconductor barriers make it possible to vary the superconductor material and explore beyond aluminum. We use InAs semiconductor nanowires coated with thin superconducting shells of β-Sn to realize transmon qubits. By tuning the Josephson energy with a gate voltage, we adjust the qubit frequency over a range of 3 GHz. The longest energy relaxation time, T 1 = 27 μs, is obtained at the lowest qubit frequencies, while the longest echo dephasing time, T 2 = 1.8 μs, is achieved at higher frequencies. We assess the possible factors limiting coherence times in these devices and discuss steps to enhance performance through improvements in materials fabrication and circuit design.
Nanofabrication techniques for superconducting qubits rely on resist-based masks patterned by electron-beam or optical lithography. We have developed an alternative nanofabrication technique based on free-standing silicon shadow masks fabricated from silicon-on-insulator wafers. These silicon shadow masks not only eliminate organic residues associated with resist-based lithography, but also provide a pathway to better understand and control surface-dielectric losses in superconducting qubits by decoupling mask fabrication from substrate preparation. We have successfully fabricated aluminum 3D transmon superconducting qubits with these shadow masks and found coherence quality factors comparable to those fabricated with standard techniques.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.