Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1605.03252 · Journal of the Korean Physical Society

Switching current distributions in InAs nanowire Josephson junctions

Bum-Kyu Kim, Yong‐Joo Doh

Published Aug 1, 2016• 3 citations
arXivHTMLPDF

Abstract

We report on the switching current distributions in nano-hybrid Josephson junctions made of InAs semiconductor nanowires. The temperature dependence of the switching current distribution can be understood through the motion of Josephson phase particles escaping from a tilted washboard potential, and the data could be fitted well by using the macroscopic quantum tunneling, thermal activation or phase diffusion models, depending on temperature. Application of the gate voltage to tune the Josephson coupling strength enable us to adjust the effective temperature for the escape process, and holds promising for developing gate-tunable superconducting phase qubits.

DOI
10.3938/jkps.69.349

Related papers

Switching current measurements of large area Josephson tunnel junctions

Andreas J. Wallraff, Alexander V. Lukashenko, C. Coqui +3 more

We have developed a scheme for high resolution measurements of the switching current distribution of a current-biased Josephson tunnel junction using a timing technique. In the measurement setup digital control and read-out electronics are galvanically isolated from the analog sample bias electronics by an optical fiber link. We have successfully used this technique to investigate thermal activation and macroscopic quantum tunneling of the phase in a high-quality 5×5 μm2 Nb–Al/AlOx–Nb Josephson tunnel junction with a critical current of Ic≈325 μA. At temperatures above the cross over temperature of T★≈280 mK the escape is dominated by thermal activation. Due to the high quality factor of the junction (Q≈95), the escape temperature is noticeably affected by the thermal prefactor. At temperatures below T★, the value of which agrees well with the theoretical predictions, the escape of the phase by quantum mechanical tunneling is observed. The presented technique can be employed to characterize current-biased Josephson tunnel junctions for applications in quantum information processing.

arXiv:cond-mat/0204527•Review of Scientific Instruments•Jul 23, 2003•74 citations

Measurements of Phase Dynamics in Planar Josephson Junctions and SQUIDs

D. Z. Haxell, Erik Cheah, Filip Křížek +8 more

We experimentally investigate the stochastic phase dynamics of planar Josephson junctions (JJs) and superconducting quantum interference devices (SQUIDs) defined in epitaxial InAs/Al heterostructures, and characterized by a large ratio of Josephson energy to charging energy. We observe a crossover from a regime of macroscopic quantum tunneling to one of phase diffusion as a function of temperature, where the transition temperature T^{*} is gate-tunable. The switching probability distributions are shown to be consistent with a small shunt capacitance and moderate damping, resulting in a switching current which is a small fraction of the critical current. Phase locking between two JJs leads to a difference in switching current between that of a JJ measured in isolation and that of the same JJ measured in an asymmetric SQUID loop. In the case of the loop, T^{*} is also tuned by a magnetic flux.

arXiv:2204.05619•Physical Review Letters•Feb 23, 2023•22 citations

Weak coupling Josephson junction as a current probe: effect of dissipation on escape dynamics

Jani M. Kivioja, T E Nieminen, Julien Claudon +3 more

We have studied the temperature dependence of escape phenomena in various underdamped Josephson junctions (JJs). The junctions had different Josephson coupling energies E J which were relatively small, but larger than the charging energy E C . Upon increasing the temperature T , we first observe the usual cross-over between macroscopic quantum tunnelling and thermally activated (TA) behaviour at temperatures k B T ∼ ℏω p , where ω p is the plasma frequency of the junction. Increasing T further, the width of the switching current distribution has, counterintuitively, a non-monotonic temperature dependence. This can be explained by the novel cross-over from TA behaviour to underdamped phase diffusion. We show that this cross-over is expected to occur at temperatures such that k B T ∼ E J (1 − 4/π Q ) 3 /2, where Q is the quality factor of the junction at the plasma frequency, in agreement with experiment. Our findings can be compared with detailed model calculations which take into account dissipation and level quantization in a metastable well. Particular attention is paid to the sample with the smallest E J , which shows extensive phase diffusion even at the lowest temperatures. This sample consists of a dc-SQUID and a single JJ close to each other, such that the SQUID acts as a tunable inductive protection for the single junction from fluctuations of a dissipative environment. By varying the flux through the dc-SQUID, we present, for the first time, experimental evidence of the escape of a JJ from the phase diffusion regime to the free running state in a tunable environment. We also show that in the zero voltage state the losses mainly occur at frequencies near the plasma resonance.

New Journal of Physics•Aug 26, 2005•15 citations

Quantum corrections in fitting the switching current distributions of intrinsic Josephson junction

Da-Jian Cui, Lin De-Hua, Haifeng Yu +7 more

In the process of theoretical fitting the switching current distributions of Josephson junction,macroscopic quantum tunneling (MQT) and thermally activated process are usually considered.Analysis of the results for a Bi2Sr2CaCu2O8+δ surface intrinsic Josephson junction (SIJJ), quantum corrections are considered at the intermediate areas between MQT and thermally activated process. It is found that quantum corrections lead to a perfect fit to the experimental data, which may be useful for the future studies of MQT in SIJJs and their possible applications as a superconducting qubit.

Acta Physica Sinica•Jan 1, 2008•5 citations

A two-step transition description of underdamped phase diffusion

Haifeng Yu, X. B. Zhu, Hui Deng +9 more

A two-step transition model describing phase diffusion and switching process in underdamped Josephson junctions is discussed. The model takes into account the phase particle's escape rate out of the potential well and transition rate from phase diffusion to the running state. Using as examples the experimental switching current distributions of two Nb/AlO x /Nb junctions of different sizes fabricated on the same chip, we extract the transition rate, which turns out to follow the predicted Arrhenius law in the thermal regime but is greatly enhanced when macroscopic quantum tunneling becomes the dominant escape mechanism. Our results show the validity of applying the model to obtain the transition rate out of the phase diffusion state into the running state from measured switching current distribution of underdamped Josephson junctions. The temperature and bias-current dependent data provide strong evidence for phase diffusion in both thermal and quantum regimes.

Journal of Physics Conference Series•Dec 17, 2012•1 citation

Probing quantum phase slips in superconducting nanowires modified using high bias voltage pulses

Thomas Aref

Quantum phase slips (QPS) or the macroscopic quantum tunneling (MQT) of a nanowire’s order parameter through an activation energy barrier have remained the subject of intense debate for many years. They are expected to occur at low enough temperature where thermally activated phase slips (TAPS) have been frozen out in analogy with Josephson junctions where the macroscopic tunneling of phase at low temperatures has been conclusively experimentally demonstrated. We address this question by following a similar experimental strategy to that employed for establishing MQT in JJs. By measuring switching current distributions, we can probe the phase slip rate and determine if it corresponds to thermal activation or quantum tunneling. Having established that the behavior we see is consistent with being in the quantum regime, we can alter properties of the nanowires and see if the response is consistent with the expectations of the quantum model. To do this we employ an in-situ modification technique using high bias voltage pulses. Using these pulses, we can change resistance, critical temperature, critical current and morphology of the nanowire. We can also change the shunting capacitance of the nanowire by altering the photolithography step used to create the nanowires electrodes. The resulting response of the nanowires agrees well with being in the quantum tunneling dominated regime. An interesting side benefit of the pulsing technique is that we can exactly set the nanowires switching current to a desired value. This may be instrumental in the development of superconducting nanowire qubits.

•Jan 1, 2010•0 citations
We report on the switching current distributions in nano-hybrid Josephson junctions made of InAs semiconductor nanowires. The temperature dependence of the switching current distribution can be understood through the motion of Josephson phase particles escaping from a tilted washboard potential, and the data could be fitted well by using the macroscopic quantum tunneling, thermal activation or phase diffusion models, depending on temperature. Application of the gate voltage to tune the Josephson coupling strength enable us to adjust the effective temperature for the escape process, and holds promising for developing gate-tunable superconducting phase qubits.
We have developed a scheme for high resolution measurements of the switching current distribution of a current-biased Josephson tunnel junction using a timing technique. In the measurement setup digital control and read-out electronics are galvanically isolated from the analog sample bias electronics by an optical fiber link. We have successfully used this technique to investigate thermal activation and macroscopic quantum tunneling of the phase in a high-quality 5×5 μm2 Nb–Al/AlOx–Nb Josephson tunnel junction with a critical current of Ic≈325 μA. At temperatures above the cross over temperature of T★≈280 mK the escape is dominated by thermal activation. Due to the high quality factor of the junction (Q≈95), the escape temperature is noticeably affected by the thermal prefactor. At temperatures below T★, the value of which agrees well with the theoretical predictions, the escape of the phase by quantum mechanical tunneling is observed. The presented technique can be employed to characterize current-biased Josephson tunnel junctions for applications in quantum information processing.
We experimentally investigate the stochastic phase dynamics of planar Josephson junctions (JJs) and superconducting quantum interference devices (SQUIDs) defined in epitaxial InAs/Al heterostructures, and characterized by a large ratio of Josephson energy to charging energy. We observe a crossover from a regime of macroscopic quantum tunneling to one of phase diffusion as a function of temperature, where the transition temperature T^{*} is gate-tunable. The switching probability distributions are shown to be consistent with a small shunt capacitance and moderate damping, resulting in a switching current which is a small fraction of the critical current. Phase locking between two JJs leads to a difference in switching current between that of a JJ measured in isolation and that of the same JJ measured in an asymmetric SQUID loop. In the case of the loop, T^{*} is also tuned by a magnetic flux.
We have studied the temperature dependence of escape phenomena in various underdamped Josephson junctions (JJs). The junctions had different Josephson coupling energies E J which were relatively small, but larger than the charging energy E C . Upon increasing the temperature T , we first observe the usual cross-over between macroscopic quantum tunnelling and thermally activated (TA) behaviour at temperatures k B T ∼ ℏω p , where ω p is the plasma frequency of the junction. Increasing T further, the width of the switching current distribution has, counterintuitively, a non-monotonic temperature dependence. This can be explained by the novel cross-over from TA behaviour to underdamped phase diffusion. We show that this cross-over is expected to occur at temperatures such that k B T ∼ E J (1 − 4/π Q ) 3 /2, where Q is the quality factor of the junction at the plasma frequency, in agreement with experiment. Our findings can be compared with detailed model calculations which take into account dissipation and level quantization in a metastable well. Particular attention is paid to the sample with the smallest E J , which shows extensive phase diffusion even at the lowest temperatures. This sample consists of a dc-SQUID and a single JJ close to each other, such that the SQUID acts as a tunable inductive protection for the single junction from fluctuations of a dissipative environment. By varying the flux through the dc-SQUID, we present, for the first time, experimental evidence of the escape of a JJ from the phase diffusion regime to the free running state in a tunable environment. We also show that in the zero voltage state the losses mainly occur at frequencies near the plasma resonance.
In the process of theoretical fitting the switching current distributions of Josephson junction,macroscopic quantum tunneling (MQT) and thermally activated process are usually considered.Analysis of the results for a Bi2Sr2CaCu2O8+δ surface intrinsic Josephson junction (SIJJ), quantum corrections are considered at the intermediate areas between MQT and thermally activated process. It is found that quantum corrections lead to a perfect fit to the experimental data, which may be useful for the future studies of MQT in SIJJs and their possible applications as a superconducting qubit.
A two-step transition model describing phase diffusion and switching process in underdamped Josephson junctions is discussed. The model takes into account the phase particle's escape rate out of the potential well and transition rate from phase diffusion to the running state. Using as examples the experimental switching current distributions of two Nb/AlO x /Nb junctions of different sizes fabricated on the same chip, we extract the transition rate, which turns out to follow the predicted Arrhenius law in the thermal regime but is greatly enhanced when macroscopic quantum tunneling becomes the dominant escape mechanism. Our results show the validity of applying the model to obtain the transition rate out of the phase diffusion state into the running state from measured switching current distribution of underdamped Josephson junctions. The temperature and bias-current dependent data provide strong evidence for phase diffusion in both thermal and quantum regimes.
Quantum phase slips (QPS) or the macroscopic quantum tunneling (MQT) of a nanowire’s order parameter through an activation energy barrier have remained the subject of intense debate for many years. They are expected to occur at low enough temperature where thermally activated phase slips (TAPS) have been frozen out in analogy with Josephson junctions where the macroscopic tunneling of phase at low temperatures has been conclusively experimentally demonstrated. We address this question by following a similar experimental strategy to that employed for establishing MQT in JJs. By measuring switching current distributions, we can probe the phase slip rate and determine if it corresponds to thermal activation or quantum tunneling. Having established that the behavior we see is consistent with being in the quantum regime, we can alter properties of the nanowires and see if the response is consistent with the expectations of the quantum model. To do this we employ an in-situ modification technique using high bias voltage pulses. Using these pulses, we can change resistance, critical temperature, critical current and morphology of the nanowire. We can also change the shunting capacitance of the nanowire by altering the photolithography step used to create the nanowires electrodes. The resulting response of the nanowires agrees well with being in the quantum tunneling dominated regime. An interesting side benefit of the pulsing technique is that we can exactly set the nanowires switching current to a desired value. This may be instrumental in the development of superconducting nanowire qubits.