Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1511.02150 · IEEE Journal on Selected Areas in Communications

A Split-Reduced Successive Cancellation List Decoder for Polar Codes

Zhaoyang Zhang, Liang Zhang, Xianbin Wang, Caijun Zhong, H. Vincent Poor

Published Nov 30, 2015• 75 citations
arXivHTMLPDF

Abstract

This paper focuses on low complexity successive cancellation list (SCL) decoding of polar codes. In particular, using the fact that splitting may be unnecessary when the reliability of decoding the unfrozen bit is sufficiently high, a novel splitting rule is proposed. Based on this rule, it is conjectured that, if the correct path survives at some stage, it tends to survive till termination without splitting with high probability. On the other hand, the incorrect paths are more likely to split at the following stages. Motivated by these observations, a simple counter that counts the successive number of stages without splitting is introduced for each decoding path to facilitate the identification of correct and incorrect paths. Specifically, any path with counter value larger than a predefined threshold ω is deemed to be the correct path, which will survive at the decoding stage, while other paths with counter value smaller than the threshold will be pruned, thereby reducing the decoding complexity. Furthermore, it is proved that there exists a unique unfrozen bit uN-K1+1, after which the successive cancellation decoder achieves the same error performance as the maximum likelihood decoder if all the prior unfrozen bits are correctly decoded, which enables further complexity reduction. Simulation results demonstrate that the proposed low complexity SCL decoder attains performance similar to that of the conventional SCL decoder, while achieving substantial complexity reduction.

DOI
10.1109/jsac.2015.2504321

Related papers

A Low Complexity Successive Cancellation List Decoding Algorithm of Polar Codes

Jiansong Miao, Weijie Li, Xuejia Hu +1 more

Polar codes are the first provably capacity-achieving novel channel codes. Successive cancellation list (SCL) decoding algorithm has a performance close to maximum-likelihood decoding when code length is finite, though the complexity is high. To reduce the complexity of SCL, a partial path expansion with segmented check and pruning SCL (PPE-SCP-SCL) algorithm is proposed in this paper. Based on the successive decoding structure, if the decoding result of a bit is judged to be reliable enough, then a hard decision is made directly and no path expansion is necessary. Moreover, several parity-check points are introduced to perform segmented parity-check during the decoding process, and if the check fails, the current path is directly abandoned. The rationality of the operations is theoretically verified, and numerical simulations also verify that the proposed algorithm can significantly reduce the complexity of decoding with trivial loss of error performance.

IEEE/CIC International Conference on Communications in China (ICCC)•Aug 9, 2020•0 citations

Low-Complexity PSCL Decoding of Polar Codes

Xinyuanmeng Yao, Xiao Ma

Successive cancellation list (SCL) decoding enables polar codes and their generalizations to deliver satisfactory performance in finite-length scenarios but it comes with high latency and complexity. To reduce latency, a partitioned SCL (PSCL) decoding algorithm, implemented over a PSCL decoding tree, can be utilized. In this work, we aim to lower down the complexity of the PSCL decoding, resulting in an efficient decoding algorithm with low latency and complexity for polar-like codes. To achieve this, we define two metrics at each level of the PSCL decoding tree. One is for evaluating the reliability of a path and the other is for estimating the probability of the correct path being included in a list of paths. Then, we propose a double-threshold strategy in the PSCL decoding process where unreliable valid paths are pruned based on the first metric, and then a list of surviving paths is selected based on the second metric. Simulation results demonstrate that when polar/CRC-polar/PAC codes are decoded using the proposed low-complexity PSCL decoder, both the sorting complexity and the computational complexity are reduced and significantly decrease as the signal-to-noise ratio (SNR) increases.

arXiv:2405.13255•May 21, 2024•0 citations

A Low-Latency Successive Cancellation Hybrid Decoder for Convolutional Polar Codes

Yu Wang, Shikai Qiu, Lirui Chen +4 more

By adopting successive cancellation list decoding (SCL), polar codes demonstrate competitive error correction performance over LDPC and Turbo codes. However, SCL decoding suffers from high computational complexity and long decoding latency, especially when the list size is very large. Successive cancellation flip (SCF), as another decoding algorithm that can achieve high error correction performance, has a complexity that is close to that of successive cancellation (SC) decoding. With the observation that SCL and SCF decoding are similar at giving more chances to inspect possible codewords simultaneously or sequentially, a novel hybrid decoder is proposed in this paper, which essentially combines the ideas of SCF and SCL decoders. Moreover, in order to compensate for the degradation of performance caused by the reduction of path splitting and further reduce the decoding latency, the convolutional polar codes are adopted with a designed bit-flipping set. Simulation results demonstrate that the proposed decoder achieves the reduction of decoding latency while attaining better performance than conventional CRC-aided SCL decoder.

IEEE International Conference on Acoustics Speech and Signal Processing•Apr 9, 2020•1 citation

Simplified Path Split Strategy for SCL Decoding Algorithm with Lower Latency

Yiling Peng, Huihui Wu, Pingping Chen +1 more

This work focuses on further reducing the decoding latency of the successive cancellation list (SCL) algorithm for polar codes, considering the fact that some path splitting may be unnecessary if a bit is reliable during the transmission. Specifically, during the node-wise SCL decoding progress, only unreliable bits need to conduct path clone, leading to the reduction of the number of path splitting and the decoding latency. On this basis, this paper proposes an improved simplified SCL (SSCL) algorithm and an improved Fast-SCL (FSCL) algorithm, for low-latency polar decoding. Simulation results performed on a (4096, 2048) polar code show that the improved SSCL algorithm reduces the decoding latency by around 44.7% when L = 4, and by 62.8% when L = 8, respectively. Moreover, the improved FSCL algorithm achieves a reduction of decoding latency by about 37.3% when L = 8, for a (4096, 3840) polar code.

Wireless Telecommunications Symposium•Apr 6, 2022•2 citations

Polar Decoding Tree Pruning Based on Soft Output Extraction

Li Shen, Yongpeng Wu, Wenjun Zhang

Although the successive cancellation list (SCL) decoding of polar codes exhibits excellent performance, it retains many decoding paths in the list with negligible contribution to the final output, resulting in high sorting and computational complexity. In this letter, we propose a novel pruning strategy to mitigate the decoding complexity. By leveraging the blockwise soft output extraction process of soft-output SCL and soft-output fast SCL decoding, we provide an accurate approximation of the probability that a decoding path is correct, and thus accordingly prune the paths failing to meet a pre-defined reliability threshold. The complexity reduction achieved by the proposed soft-output-based pruned SCL (SOP-SCL) decoder and its fast version, SOP-FSCL decoder, is significant, without any compromise in error-correction performance. Meanwhile, they also prove to be more efficient than state-of-the-art pruned polar decoders.

arXiv:2606.13214•Jun 11, 2026•0 citations

Low-Complexity Successive Cancellation List Decoding of Polar Codes Based on Path Metric

Xiaodong Liu, Ce Sun, Wei Tang

Successive cancellation (SC) decoding algorithm and successive cancellation list (SCL) decoding algorithm are two common decoding methods for polar codes. The SC decoding algorithm has low complexity, but in its decoding process, the bits with small channel indices are used to assist the decoding of the bits with large channel indices. Therefore, the bit being decoded depends on the bits that have already been decoded which causes error propagation. On the basis of SC decoding, the SCL decoding algorithm overcomes the problem of error propagation by widening the path search width and retaining multiple paths at the same time in the decoding process. However, the complexity of SCL decoding is higher than that of SC decoding. Without changing the performance of the SCL decoding algorithm, we propose a low-complexity SCL decoding algorithm based on path metric (PM). After the last frozen bit is decoded, the path with the smallest PM is selected, and the subsequent nodes adopt SC decoding. Through this combination of SCL decoding and SC decoding, the complexity of the SCL decoding algorithm can be effectively reduced while the SCL decoding performance remains unchanged, especially in the case of high code rates.

IEEE International Conference on Communication Technology (ICCT)•Oct 13, 2021•3 citations
This paper focuses on low complexity successive cancellation list (SCL) decoding of polar codes. In particular, using the fact that splitting may be unnecessary when the reliability of decoding the unfrozen bit is sufficiently high, a novel splitting rule is proposed. Based on this rule, it is conjectured that, if the correct path survives at some stage, it tends to survive till termination without splitting with high probability. On the other hand, the incorrect paths are more likely to split at the following stages. Motivated by these observations, a simple counter that counts the successive number of stages without splitting is introduced for each decoding path to facilitate the identification of correct and incorrect paths. Specifically, any path with counter value larger than a predefined threshold ω is deemed to be the correct path, which will survive at the decoding stage, while other paths with counter value smaller than the threshold will be pruned, thereby reducing the decoding complexity. Furthermore, it is proved that there exists a unique unfrozen bit uN-K1+1, after which the successive cancellation decoder achieves the same error performance as the maximum likelihood decoder if all the prior unfrozen bits are correctly decoded, which enables further complexity reduction. Simulation results demonstrate that the proposed low complexity SCL decoder attains performance similar to that of the conventional SCL decoder, while achieving substantial complexity reduction.
Polar codes are the first provably capacity-achieving novel channel codes. Successive cancellation list (SCL) decoding algorithm has a performance close to maximum-likelihood decoding when code length is finite, though the complexity is high. To reduce the complexity of SCL, a partial path expansion with segmented check and pruning SCL (PPE-SCP-SCL) algorithm is proposed in this paper. Based on the successive decoding structure, if the decoding result of a bit is judged to be reliable enough, then a hard decision is made directly and no path expansion is necessary. Moreover, several parity-check points are introduced to perform segmented parity-check during the decoding process, and if the check fails, the current path is directly abandoned. The rationality of the operations is theoretically verified, and numerical simulations also verify that the proposed algorithm can significantly reduce the complexity of decoding with trivial loss of error performance.
Successive cancellation list (SCL) decoding enables polar codes and their generalizations to deliver satisfactory performance in finite-length scenarios but it comes with high latency and complexity. To reduce latency, a partitioned SCL (PSCL) decoding algorithm, implemented over a PSCL decoding tree, can be utilized. In this work, we aim to lower down the complexity of the PSCL decoding, resulting in an efficient decoding algorithm with low latency and complexity for polar-like codes. To achieve this, we define two metrics at each level of the PSCL decoding tree. One is for evaluating the reliability of a path and the other is for estimating the probability of the correct path being included in a list of paths. Then, we propose a double-threshold strategy in the PSCL decoding process where unreliable valid paths are pruned based on the first metric, and then a list of surviving paths is selected based on the second metric. Simulation results demonstrate that when polar/CRC-polar/PAC codes are decoded using the proposed low-complexity PSCL decoder, both the sorting complexity and the computational complexity are reduced and significantly decrease as the signal-to-noise ratio (SNR) increases.
By adopting successive cancellation list decoding (SCL), polar codes demonstrate competitive error correction performance over LDPC and Turbo codes. However, SCL decoding suffers from high computational complexity and long decoding latency, especially when the list size is very large. Successive cancellation flip (SCF), as another decoding algorithm that can achieve high error correction performance, has a complexity that is close to that of successive cancellation (SC) decoding. With the observation that SCL and SCF decoding are similar at giving more chances to inspect possible codewords simultaneously or sequentially, a novel hybrid decoder is proposed in this paper, which essentially combines the ideas of SCF and SCL decoders. Moreover, in order to compensate for the degradation of performance caused by the reduction of path splitting and further reduce the decoding latency, the convolutional polar codes are adopted with a designed bit-flipping set. Simulation results demonstrate that the proposed decoder achieves the reduction of decoding latency while attaining better performance than conventional CRC-aided SCL decoder.
This work focuses on further reducing the decoding latency of the successive cancellation list (SCL) algorithm for polar codes, considering the fact that some path splitting may be unnecessary if a bit is reliable during the transmission. Specifically, during the node-wise SCL decoding progress, only unreliable bits need to conduct path clone, leading to the reduction of the number of path splitting and the decoding latency. On this basis, this paper proposes an improved simplified SCL (SSCL) algorithm and an improved Fast-SCL (FSCL) algorithm, for low-latency polar decoding. Simulation results performed on a (4096, 2048) polar code show that the improved SSCL algorithm reduces the decoding latency by around 44.7% when L = 4, and by 62.8% when L = 8, respectively. Moreover, the improved FSCL algorithm achieves a reduction of decoding latency by about 37.3% when L = 8, for a (4096, 3840) polar code.
Although the successive cancellation list (SCL) decoding of polar codes exhibits excellent performance, it retains many decoding paths in the list with negligible contribution to the final output, resulting in high sorting and computational complexity. In this letter, we propose a novel pruning strategy to mitigate the decoding complexity. By leveraging the blockwise soft output extraction process of soft-output SCL and soft-output fast SCL decoding, we provide an accurate approximation of the probability that a decoding path is correct, and thus accordingly prune the paths failing to meet a pre-defined reliability threshold. The complexity reduction achieved by the proposed soft-output-based pruned SCL (SOP-SCL) decoder and its fast version, SOP-FSCL decoder, is significant, without any compromise in error-correction performance. Meanwhile, they also prove to be more efficient than state-of-the-art pruned polar decoders.
Successive cancellation (SC) decoding algorithm and successive cancellation list (SCL) decoding algorithm are two common decoding methods for polar codes. The SC decoding algorithm has low complexity, but in its decoding process, the bits with small channel indices are used to assist the decoding of the bits with large channel indices. Therefore, the bit being decoded depends on the bits that have already been decoded which causes error propagation. On the basis of SC decoding, the SCL decoding algorithm overcomes the problem of error propagation by widening the path search width and retaining multiple paths at the same time in the decoding process. However, the complexity of SCL decoding is higher than that of SC decoding. Without changing the performance of the SCL decoding algorithm, we propose a low-complexity SCL decoding algorithm based on path metric (PM). After the last frozen bit is decoded, the path with the smallest PM is selected, and the subsequent nodes adopt SC decoding. Through this combination of SCL decoding and SC decoding, the complexity of the SCL decoding algorithm can be effectively reduced while the SCL decoding performance remains unchanged, especially in the case of high code rates.