Polar codes are the first provably capacity-achieving novel channel codes. Successive cancellation list (SCL) decoding algorithm has a performance close to maximum-likelihood decoding when code length is finite, though the complexity is high. To reduce the complexity of SCL, a partial path expansion with segmented check and pruning SCL (PPE-SCP-SCL) algorithm is proposed in this paper. Based on the successive decoding structure, if the decoding result of a bit is judged to be reliable enough, then a hard decision is made directly and no path expansion is necessary. Moreover, several parity-check points are introduced to perform segmented parity-check during the decoding process, and if the check fails, the current path is directly abandoned. The rationality of the operations is theoretically verified, and numerical simulations also verify that the proposed algorithm can significantly reduce the complexity of decoding with trivial loss of error performance.
Polar codes are the first provably capacity-achieving novel channel codes. Successive cancellation list (SCL) decoding algorithm has a performance close to maximum-likelihood decoding when code length is finite, though the complexity is high. To reduce the complexity of SCL, a partial path expansion with segmented check and pruning SCL (PPE-SCP-SCL) algorithm is proposed in this paper. Based on the successive decoding structure, if the decoding result of a bit is judged to be reliable enough, then a hard decision is made directly and no path expansion is necessary. Moreover, several parity-check points are introduced to perform segmented parity-check during the decoding process, and if the check fails, the current path is directly abandoned. The rationality of the operations is theoretically verified, and numerical simulations also verify that the proposed algorithm can significantly reduce the complexity of decoding with trivial loss of error performance.
The successive cancellation list (SCL) decoding of polar codes can achieve a performance close to that of maximum-likelihood decoding. Nevertheless, a large list size results in high-computational complexity. In this paper, a successive cancellation priority (SCP) decoding algorithm is proposed to reduce the time complexity. The SCP decoder performs a priority-first decoding, which is composed of a priority queue and a trellis. During the SCP decoding, the priority queue interacts with the trellis iteratively. Conceptually, the priority queue stores the priority information and guides the extension of the candidate path. The trellis calculates and stores the intermediate results. Since most of the unnecessary path extensions are avoided by using the priority queue, the time complexity of the SCP decoder is much lower than that of the standard SCL decoder. Then, a quantized priority queue is introduced to avoid the comparison operations in the path selection and to simplify the SCP decoder. Furthermore, we prove that the path extension of the SCP decoder is equivalent to the extension of the most reliable paths of the standard SCL decoder. Thus, the SCP decoder can achieve the same decoding performance as that of the standard SCL decoder.
This paper focuses on low complexity successive cancellation list (SCL) decoding of polar codes. In particular, using the fact that splitting may be unnecessary when the reliability of decoding the unfrozen bit is sufficiently high, a novel splitting rule is proposed. Based on this rule, it is conjectured that, if the correct path survives at some stage, it tends to survive till termination without splitting with high probability. On the other hand, the incorrect paths are more likely to split at the following stages. Motivated by these observations, a simple counter that counts the successive number of stages without splitting is introduced for each decoding path to facilitate the identification of correct and incorrect paths. Specifically, any path with counter value larger than a predefined threshold ω is deemed to be the correct path, which will survive at the decoding stage, while other paths with counter value smaller than the threshold will be pruned, thereby reducing the decoding complexity. Furthermore, it is proved that there exists a unique unfrozen bit uN-K1+1, after which the successive cancellation decoder achieves the same error performance as the maximum likelihood decoder if all the prior unfrozen bits are correctly decoded, which enables further complexity reduction. Simulation results demonstrate that the proposed low complexity SCL decoder attains performance similar to that of the conventional SCL decoder, while achieving substantial complexity reduction.
Successive cancellation (SC) decoding algorithm and successive cancellation list (SCL) decoding algorithm are two common decoding methods for polar codes. The SC decoding algorithm has low complexity, but in its decoding process, the bits with small channel indices are used to assist the decoding of the bits with large channel indices. Therefore, the bit being decoded depends on the bits that have already been decoded which causes error propagation. On the basis of SC decoding, the SCL decoding algorithm overcomes the problem of error propagation by widening the path search width and retaining multiple paths at the same time in the decoding process. However, the complexity of SCL decoding is higher than that of SC decoding. Without changing the performance of the SCL decoding algorithm, we propose a low-complexity SCL decoding algorithm based on path metric (PM). After the last frozen bit is decoded, the path with the smallest PM is selected, and the subsequent nodes adopt SC decoding. Through this combination of SCL decoding and SC decoding, the complexity of the SCL decoding algorithm can be effectively reduced while the SCL decoding performance remains unchanged, especially in the case of high code rates.
Although the adaptive successive cancellation list (AD-SCL) algorithm and the segmented-CRC adaptive successive cancellation list (SCAD-SCL) algorithm based on the cyclic redundancy check (CRC) can greatly reduce the computational complexity of the successive cancellation list (SCL) algorithm, these two algorithms discard the previous decoding result and re-decode by increasing L, where L is the size of list. When CRC fails, these two algorithms waste useful information from the previous decoding. In this paper, a simplified adaptive successive cancellation list (SAD-SCL) is proposed. Before the re-decoding of updating value L each time, SAD-SCL uses the existing log likelihood ratio (LLR) information to locate the range of burst error bits, and then re-decoding starts at the incorrect bit with the smallest index in this range. Moreover, when the segmented information sequence cannot get the correct result of decoding, the SAD-SCL algorithm uses SC decoding to complete the decoding of the subsequent segmentation information sequence. Furthermore, its decoding performance is almost the same as that of the subsequent segmentation information sequence using the AD-SCL algorithm. The simulation results show that the SAD-SCL algorithm has lower computational complexity than AD-SCL and SCAD-SCL with negligible loss of performance.
Polar codes have garnered significant attention since they were proposed due to their capacity-achieving properties and their low-complexity decoding process, and they were selected as the coding scheme for the control channel in 5G mobile communication technology. A successive cancellation list (SCL) decoder, aided by a cyclic redundancy check (CRC), performs the competitive error correcting performance for polar codes compared to other sophisticated codes. The SCL-Flip decoding algorithm is proposed to enhance the error correction performance of the SCL. However, the SCL-Flip is hampered by a high decoding complexity due to the necessary selection and sorting process of path metrics (PMs). Additionally, it requires a large number of iterations to achieve a good error correction performance. In this paper, we propose the error segment bit-flip (ES-SCL-Flip) decoding algorithm, a simplified bit-flip approach for the SCL decoder based on analyzing the distributions of the first error bit. Firstly, we construct an index set with a high probability of the first erroneous bit. Second, a bit-flip criterion is introduced to prevent the costly operation of the PM selection and sorting without compromising the error correction performance. Finally, a search strategy is employed that utilizes segmented error indication to target and rectify the initial error segment sequentially. The simulation results demonstrate that the ES-SCL-Flip decoder provides an improved error correction performance with only a minimal increase in decoding complexity compared to the conventional CRC-aided SCL decoder. This algorithm attains a commendable equilibrium between the error correction performance and decoding complexity.
Successive cancellation list (SCL) decoding enables polar codes and their generalizations to deliver satisfactory performance in finite-length scenarios but it comes with high latency and complexity. To reduce latency, a partitioned SCL (PSCL) decoding algorithm, implemented over a PSCL decoding tree, can be utilized. In this work, we aim to lower down the complexity of the PSCL decoding, resulting in an efficient decoding algorithm with low latency and complexity for polar-like codes. To achieve this, we define two metrics at each level of the PSCL decoding tree. One is for evaluating the reliability of a path and the other is for estimating the probability of the correct path being included in a list of paths. Then, we propose a double-threshold strategy in the PSCL decoding process where unreliable valid paths are pruned based on the first metric, and then a list of surviving paths is selected based on the second metric. Simulation results demonstrate that when polar/CRC-polar/PAC codes are decoded using the proposed low-complexity PSCL decoder, both the sorting complexity and the computational complexity are reduced and significantly decrease as the signal-to-noise ratio (SNR) increases.