By adopting successive cancellation list decoding (SCL), polar codes demonstrate competitive error correction performance over LDPC and Turbo codes. However, SCL decoding suffers from high computational complexity and long decoding latency, especially when the list size is very large. Successive cancellation flip (SCF), as another decoding algorithm that can achieve high error correction performance, has a complexity that is close to that of successive cancellation (SC) decoding. With the observation that SCL and SCF decoding are similar at giving more chances to inspect possible codewords simultaneously or sequentially, a novel hybrid decoder is proposed in this paper, which essentially combines the ideas of SCF and SCL decoders. Moreover, in order to compensate for the degradation of performance caused by the reduction of path splitting and further reduce the decoding latency, the convolutional polar codes are adopted with a designed bit-flipping set. Simulation results demonstrate that the proposed decoder achieves the reduction of decoding latency while attaining better performance than conventional CRC-aided SCL decoder.
By adopting successive cancellation list decoding (SCL), polar codes demonstrate competitive error correction performance over LDPC and Turbo codes. However, SCL decoding suffers from high computational complexity and long decoding latency, especially when the list size is very large. Successive cancellation flip (SCF), as another decoding algorithm that can achieve high error correction performance, has a complexity that is close to that of successive cancellation (SC) decoding. With the observation that SCL and SCF decoding are similar at giving more chances to inspect possible codewords simultaneously or sequentially, a novel hybrid decoder is proposed in this paper, which essentially combines the ideas of SCF and SCL decoders. Moreover, in order to compensate for the degradation of performance caused by the reduction of path splitting and further reduce the decoding latency, the convolutional polar codes are adopted with a designed bit-flipping set. Simulation results demonstrate that the proposed decoder achieves the reduction of decoding latency while attaining better performance than conventional CRC-aided SCL decoder.
When the code length is finite, the successive cancellation list (SCL) decoding of polar codes shows as good error-correction performance as low-density parity-check codes and turbo codes and it will be used in high-speed communications. However, since the hardware complexity of the SCL increases linearly as the size of the list increases, it is difficult to use the high-complexity SCL decoding for devices with limited resource such as IoT devices. The successive cancellation flip (SCF) decoding algorithm has been proposed to solve the problem of high hardware complexity and to enhance the error-correction performance of successive cancellation decoding. However, the conventional SCF decoding has high computational complexity. In this paper, we propose the interleaver-aided successive cancellation flip (ISCF) decoding to reduce the computational complexity. The computational complexity of the ISCF decoding is less by at least 32% than the conventional SCF decoding for error frame at Eb/N0=3.5dB.
The successive-cancellation list (SCL) and successive-cancellation flip (SCF) decoding can be used to improve the performance of polar codes, especially for short to moderate length codes. However, their serial decoding nature results in significant decoding latencies. Implementing some operations in parallel can reduce their decoding latencies. This paper presents fast implementations of the SCL and SCF decoders. In particular, we propose fast parallel list decoders for five newly identified types of nodes in the decoding tree of a polar code, which significantly improves the decoding latency. We also present novel fast SCF decoders that decode some special nodes in the decoding tree of a polar code without serially computing bit log-likelihood ratios. Using our proposed fast parallel SCF decoders, we observed an improvement up to 81% with respect to the original SCF decoder. This significant reduction in the decoding latency is observed without sacrificing the bit-error-rate performance of the code.
Polar codes have garnered significant attention since they were proposed due to their capacity-achieving properties and their low-complexity decoding process, and they were selected as the coding scheme for the control channel in 5G mobile communication technology. A successive cancellation list (SCL) decoder, aided by a cyclic redundancy check (CRC), performs the competitive error correcting performance for polar codes compared to other sophisticated codes. The SCL-Flip decoding algorithm is proposed to enhance the error correction performance of the SCL. However, the SCL-Flip is hampered by a high decoding complexity due to the necessary selection and sorting process of path metrics (PMs). Additionally, it requires a large number of iterations to achieve a good error correction performance. In this paper, we propose the error segment bit-flip (ES-SCL-Flip) decoding algorithm, a simplified bit-flip approach for the SCL decoder based on analyzing the distributions of the first error bit. Firstly, we construct an index set with a high probability of the first erroneous bit. Second, a bit-flip criterion is introduced to prevent the costly operation of the PM selection and sorting without compromising the error correction performance. Finally, a search strategy is employed that utilizes segmented error indication to target and rectify the initial error segment sequentially. The simulation results demonstrate that the ES-SCL-Flip decoder provides an improved error correction performance with only a minimal increase in decoding complexity compared to the conventional CRC-aided SCL decoder. This algorithm attains a commendable equilibrium between the error correction performance and decoding complexity.
Polar codes, as the first provable capacity-achieving error-correcting codes, have received much attention in recent years. However, the decoding performance of polar codes with traditional successive-cancellation (SC) algorithm cannot match that of the low-density parity-check or Turbo codes. Because SC list (SCL) decoding algorithm can significantly improve the error-correcting performance of polar codes, design of SCL decoders is important for polar codes to be deployed in practical applications. However, because the prior latency reduction approaches for SC decoders are not applicable for SCL decoders, these list decoders suffer from the long-latency bottleneck. In this paper, we propose a multibit-decision approach that can significantly reduce latency of SCL decoders. First, we present a reformulated SCL algorithm that can perform intermediate decoding of 2 b together. The proposed approach, referred as 2-bit reformulated SCL (2b-rSCL) algorithm, can reduce the latency of SCL decoder from (3n-2) to (2n-2) clock cycles without any performance loss. Then, we extend the idea of 2-b-decision to general case, and propose a general decoding scheme that can perform intermediate decoding of any 2Kbits simultaneously. This general approach, referred as 2K-bit reformulated SCL (2Kb-rSCL) algorithm, can reduce the overall decoding latency to as short as n/2K-2-2 cycles. Furthermore, on the basis of the proposed algorithms, very large-scale integration architectures for 2b-rSCL and 4b-rSCL decoders are synthesized. Compared with a prior SCL decoder, the proposed (1024, 512) 2b-rSCL and 4b-rSCL decoders can achieve 21% and 60% reduction in latency, 1.66 and 2.77 times increase in coded throughput with list size 2, and 2.11 and 3.23 times increase in coded throughput with list size 4, respectively.
Polar codes, as the coding scheme for the control channel in fifth-generation mobile communication technology (5G), have attracted widespread attention since their proposal. As a mainstream decoding algorithm for polar codes, the successive cancellation list (SCL) decoder usually improves the error correction performance by increasing the list size, but this method suffers from the problems of high decoding complexity. To address this problem, this paper proposes a layered-search bit-flipping (LS-SCLF) decoding algorithm based on SCL decoding. Firstly, a new flip-bit metric is proposed, which derives a formula to approximate the probability of an error occurring in an information bit. This formula introduces a perturbation parameter to improve the calculation accuracy. Secondly, a compromise scheme for determining the perturbation parameter is proposed. The scheme uses Monte Carlo simulation to determine an optimized parameter for the precise positioning of the first erroneous decoded bit under different decoding conditions. Finally, a layered search strategy is adopted to sequentially search the erroneous decoded bits from the low order to high order, which can correct up to multiple bits at the same time. Simulation results show that the proposed algorithm achieves improved error correction performance with a slight increase in decoding complexity compared to the generalized SCL-Flip (GSCLF) decoding algorithm. This algorithm also achieves a good balance between the error correction performance and decoding complexity.
Successive cancellation (SC) decoding algorithm and successive cancellation list (SCL) decoding algorithm are two common decoding methods for polar codes. The SC decoding algorithm has low complexity, but in its decoding process, the bits with small channel indices are used to assist the decoding of the bits with large channel indices. Therefore, the bit being decoded depends on the bits that have already been decoded which causes error propagation. On the basis of SC decoding, the SCL decoding algorithm overcomes the problem of error propagation by widening the path search width and retaining multiple paths at the same time in the decoding process. However, the complexity of SCL decoding is higher than that of SC decoding. Without changing the performance of the SCL decoding algorithm, we propose a low-complexity SCL decoding algorithm based on path metric (PM). After the last frozen bit is decoded, the path with the smallest PM is selected, and the subsequent nodes adopt SC decoding. Through this combination of SCL decoding and SC decoding, the complexity of the SCL decoding algorithm can be effectively reduced while the SCL decoding performance remains unchanged, especially in the case of high code rates.