The successive-cancellation list (SCL) and successive-cancellation flip (SCF) decoding can be used to improve the performance of polar codes, especially for short to moderate length codes. However, their serial decoding nature results in significant decoding latencies. Implementing some operations in parallel can reduce their decoding latencies. This paper presents fast implementations of the SCL and SCF decoders. In particular, we propose fast parallel list decoders for five newly identified types of nodes in the decoding tree of a polar code, which significantly improves the decoding latency. We also present novel fast SCF decoders that decode some special nodes in the decoding tree of a polar code without serially computing bit log-likelihood ratios. Using our proposed fast parallel SCF decoders, we observed an improvement up to 81% with respect to the original SCF decoder. This significant reduction in the decoding latency is observed without sacrificing the bit-error-rate performance of the code.
The successive-cancellation list (SCL) and successive-cancellation flip (SCF) decoding can be used to improve the performance of polar codes, especially for short to moderate length codes. However, their serial decoding nature results in significant decoding latencies. Implementing some operations in parallel can reduce their decoding latencies. This paper presents fast implementations of the SCL and SCF decoders. In particular, we propose fast parallel list decoders for five newly identified types of nodes in the decoding tree of a polar code, which significantly improves the decoding latency. We also present novel fast SCF decoders that decode some special nodes in the decoding tree of a polar code without serially computing bit log-likelihood ratios. Using our proposed fast parallel SCF decoders, we observed an improvement up to 81% with respect to the original SCF decoder. This significant reduction in the decoding latency is observed without sacrificing the bit-error-rate performance of the code.
Due to the ability to provide superior error-correction performance, the successive cancellation list (SCL) algorithm is widely regarded as one of the most promising decoding algorithms for polar codes with short-to-moderate code lengths. However, the application of SCL decoding in low-latency communication scenarios is limited due to its sequential nature. To reduce the decoding latency, developing tailored fast and efficient list decoding algorithms of specific polar constituent codes (special nodes) is a promising solution. Recently, fast list decoding algorithms are proposed by considering special nodes with low code rates. Aiming to further speedup the SCL decoding, this paper presents fast list decoding algorithms for two types of high-rate special nodes, namely single-parity-check (SPC) nodes and sequence rate one or single-parity-check (SR1/SPC) nodes. In particular, we develop two classes of fast list decoding algorithms for these nodes, where the first class uses a sequential decoding procedure to yield decoding latency that is linear with the list size, and the second further parallelizes the decoding process by pre-determining the redundant candidate paths offline. Simulation results show that the proposed list decoding algorithms are able to achieve up to 70.7% lower decoding latency than state-of-the-art fast SCL decoders, while exhibiting the same error-correction performance.
By adopting successive cancellation list decoding (SCL), polar codes demonstrate competitive error correction performance over LDPC and Turbo codes. However, SCL decoding suffers from high computational complexity and long decoding latency, especially when the list size is very large. Successive cancellation flip (SCF), as another decoding algorithm that can achieve high error correction performance, has a complexity that is close to that of successive cancellation (SC) decoding. With the observation that SCL and SCF decoding are similar at giving more chances to inspect possible codewords simultaneously or sequentially, a novel hybrid decoder is proposed in this paper, which essentially combines the ideas of SCF and SCL decoders. Moreover, in order to compensate for the degradation of performance caused by the reduction of path splitting and further reduce the decoding latency, the convolutional polar codes are adopted with a designed bit-flipping set. Simulation results demonstrate that the proposed decoder achieves the reduction of decoding latency while attaining better performance than conventional CRC-aided SCL decoder.
Compared with the bit-wise successive cancellation list (SCL) decoding of polar codes, the node-based Fast SCL decoding significantly reduces the decoding latency by identifying special constituent codes and decoding these in parallel. To further reduce the latency of current Fast SCL decoders, we first propose a fast sequence repetition (SR) node-based SCL (Fast SR-SCL) decoding algorithm, which only involves one type of node in the SCL decoding tree. Furthermore, we employ the adaptive path splitting (APS) strategy to terminate the path splitting in the SR node early, without degrading the error-correcting performance. Numerical results show that for 5G uplink codes with a length of 1024 and rates of 1/4, 1/2, and 3/4, our decoder can deliver the same decoding performance while reducing the average latency by 34.5%, 38.0%, and 39.6% compared with the state-of-the-art Fast SCL decoder for a list size L = 8.
This work presents a fast successive-cancellation list flip (Fast-SCLF) decoding algorithm for polar codes that addresses the high latency issue associated with the successive-cancellation list flip (SCLF) decoding algorithm. We first propose a bit-flipping strategy tailored to the state-of-the-art fast successive-cancellation list (FSCL) decoding that avoids tree-traversal in the binary tree representation of SCLF, thus reducing the latency of the decoding process. We then derive a parameterized path selection error model to accurately estimate the bit index at which the correct decoding path is eliminated from the initial FSCL decoding. The trainable parameter is optimized online based on an efficient supervised learning framework. Simulation results show that for a polar code of length 512 with 256 information bits, with similar error-correction performance and memory consumption, the proposed Fast-SCLF decoder reduces up to 73.4% of the average decoding latency of the SCLF decoder with the same list size at the frame error rate of 10−4, while incurring a maximum computational complexity overhead of 27.6%. For the same polar code of length 512 with 256 information bits and at practical signal-to-noise ratios, the proposed decoder with list size 4 reduces 89.3% and 43.7% of the average complexity and decoding latency of the FSCL decoder with list size 32 (FSCL-32), respectively, while also reducing 83.2% of the memory consumption of FSCL-32. The significant improvements of the proposed decoder come at the cost of 0.07 dB error-correction performance degradation compared with FSCL-32.
Being able to provide excellent error-correction performance for polar codes with short-to-moderate code length, successive-cancellation list (SCL) is regarded as one of the most promising decoding algorithms. However, the application of SCL decoding in low-latency communication scenarios is limited due to its sequential nature. Recently, fast list decoding algorithms are proposed by considering special nodes with low code rates. Aiming at achieving further speedup for SCL decoding, this paper presents fast list decoding algorithms for two types of high-rate special nodes, namely single-parity-check (SPC) and sequence rate-1(SRI) nodes, based on the minimum-combinations set (MCS) which is able to significantly narrow the search space of candidate paths. Typically, SPC nodes can be directly decoded within one round of path splitting procedure, whereas SR1 nodes, as a group of parallel SPC nodes, can also be decode efficiently. Simulation results show that the proposed fast SCL decoder is able to reduce the decoding latency by 68.4% as compared to the state of the art, without any error-correction performance degradation.
The soft-output successive cancellation list (SO-SCL) decoder provides a methodology for estimating the a-posteriori probability log-likelihood ratios by only leveraging the conventional SCL decoder for polar codes. However, the sequential nature of SCL decoding leads to a high decoding latency for the SO-SCL decoder. In this paper, we propose a soft-output fast SCL (SO-FSCL) decoder by incorporating node-based fast decoding into the SO-SCL framework. Simulation results demonstrate that the proposed SO-FSCL decoder significantly reduces the decoding latency without loss of performance compared with the SO-SCL decoder.