Successive cancellation list (SCL) decoding enables polar codes and their generalizations to deliver satisfactory performance in finite-length scenarios but it comes with high latency and complexity. To reduce latency, a partitioned SCL (PSCL) decoding algorithm, implemented over a PSCL decoding tree, can be utilized. In this work, we aim to lower down the complexity of the PSCL decoding, resulting in an efficient decoding algorithm with low latency and complexity for polar-like codes. To achieve this, we define two metrics at each level of the PSCL decoding tree. One is for evaluating the reliability of a path and the other is for estimating the probability of the correct path being included in a list of paths. Then, we propose a double-threshold strategy in the PSCL decoding process where unreliable valid paths are pruned based on the first metric, and then a list of surviving paths is selected based on the second metric. Simulation results demonstrate that when polar/CRC-polar/PAC codes are decoded using the proposed low-complexity PSCL decoder, both the sorting complexity and the computational complexity are reduced and significantly decrease as the signal-to-noise ratio (SNR) increases.
Successive cancellation list (SCL) decoding enables polar codes and their generalizations to deliver satisfactory performance in finite-length scenarios but it comes with high latency and complexity. To reduce latency, a partitioned SCL (PSCL) decoding algorithm, implemented over a PSCL decoding tree, can be utilized. In this work, we aim to lower down the complexity of the PSCL decoding, resulting in an efficient decoding algorithm with low latency and complexity for polar-like codes. To achieve this, we define two metrics at each level of the PSCL decoding tree. One is for evaluating the reliability of a path and the other is for estimating the probability of the correct path being included in a list of paths. Then, we propose a double-threshold strategy in the PSCL decoding process where unreliable valid paths are pruned based on the first metric, and then a list of surviving paths is selected based on the second metric. Simulation results demonstrate that when polar/CRC-polar/PAC codes are decoded using the proposed low-complexity PSCL decoder, both the sorting complexity and the computational complexity are reduced and significantly decrease as the signal-to-noise ratio (SNR) increases.
The Successive-Cancellation List (SCL) algorithm is a popular decoding algorithm for polar codes. Although SCL algorithm overcomes the error propagation problem in polar codes decoding, the improvement of error correction performance needs to pay the price of high latency. To solve this problem, a simplified SCL (SSCL) algorithm is proposed. For some special nodes, the SSCL algorithm can calculate path metric (PM) without traversing the decoding tree to achieve direct decoding, reducing the latency and complexity of decoding. In this paper, a new special node has been discovered, it is also possible to calculate PM without traversing decoding tree. Based on this, we propose an improved SSCL algorithm. Simulation results show that improved SSCL algorithm can further reduce the decoding latency and the loss of error-correction performance is negligible.
Although the successive cancellation list (SCL) decoding of polar codes exhibits excellent performance, it retains many decoding paths in the list with negligible contribution to the final output, resulting in high sorting and computational complexity. In this letter, we propose a novel pruning strategy to mitigate the decoding complexity. By leveraging the blockwise soft output extraction process of soft-output SCL and soft-output fast SCL decoding, we provide an accurate approximation of the probability that a decoding path is correct, and thus accordingly prune the paths failing to meet a pre-defined reliability threshold. The complexity reduction achieved by the proposed soft-output-based pruned SCL (SOP-SCL) decoder and its fast version, SOP-FSCL decoder, is significant, without any compromise in error-correction performance. Meanwhile, they also prove to be more efficient than state-of-the-art pruned polar decoders.
Sorting operation is one of the main bottlenecks for the successive-cancellation list (SCL) decoding. This paper introduces an improvement to the SCL decoding for polar and pre-transformed polar codes that reduces the number of sorting operations without visible degradation in the code’s error-correction performance. In an SCL decoding with an optimum metric function we show that, on average, the correct branch’s bit-metric value must be equal to the bit-channel capacity, and on the other hand, the average bit-metric value of a wrong branch can be at most zero. This implies that a wrong path’s partial path metric value deviates from the bit-channel capacity’s partial summation. For relatively reliable bit-channels, the bit metric for a wrong branch becomes very large negative number, which enables us to detect and prune such paths. We prove that, for a threshold lower than the bit-channel cutoff rate, the probability of pruning the correct path decreases exponentially by the given threshold. Based on these findings, we presented a pruning technique, and the experimental results demonstrate a substantial decrease in the amount of sorting procedures required for SCL decoding. In the stack algorithm, a similar technique is used to significantly reduce the average number of paths in the stack.
Although the successive cancellation list (SCL) decoding of polar codes exhibits excellent performance, it retains many decoding paths in the list with negligible contribution to the final output, resulting in high sorting and computational complexity. In this letter, we propose a novel pruning strategy to mitigate the decoding complexity. By leveraging the blockwise soft output extraction process of soft-output SCL and soft-output fast SCL decoding, we provide an accurate approximation of the probability that a decoding path is correct, and thus accordingly prune the paths failing to meet a pre-defined reliability threshold. The complexity reduction achieved by the proposed soft-output-based pruned SCL (SOP-SCL) decoder and its fast version, SOP-FSCL decoder, is significant, without any compromise in error-correction performance. Meanwhile, they also prove to be more efficient than state-of-the-art pruned polar decoders.
This work focuses on further reducing the decoding latency of the successive cancellation list (SCL) algorithm for polar codes, considering the fact that some path splitting may be unnecessary if a bit is reliable during the transmission. Specifically, during the node-wise SCL decoding progress, only unreliable bits need to conduct path clone, leading to the reduction of the number of path splitting and the decoding latency. On this basis, this paper proposes an improved simplified SCL (SSCL) algorithm and an improved Fast-SCL (FSCL) algorithm, for low-latency polar decoding. Simulation results performed on a (4096, 2048) polar code show that the improved SSCL algorithm reduces the decoding latency by around 44.7% when L = 4, and by 62.8% when L = 8, respectively. Moreover, the improved FSCL algorithm achieves a reduction of decoding latency by about 37.3% when L = 8, for a (4096, 3840) polar code.
This paper focuses on low complexity successive cancellation list (SCL) decoding of polar codes. In particular, using the fact that splitting may be unnecessary when the reliability of decoding the unfrozen bit is sufficiently high, a novel splitting rule is proposed. Based on this rule, it is conjectured that, if the correct path survives at some stage, it tends to survive till termination without splitting with high probability. On the other hand, the incorrect paths are more likely to split at the following stages. Motivated by these observations, a simple counter that counts the successive number of stages without splitting is introduced for each decoding path to facilitate the identification of correct and incorrect paths. Specifically, any path with counter value larger than a predefined threshold ω is deemed to be the correct path, which will survive at the decoding stage, while other paths with counter value smaller than the threshold will be pruned, thereby reducing the decoding complexity. Furthermore, it is proved that there exists a unique unfrozen bit uN-K1+1, after which the successive cancellation decoder achieves the same error performance as the maximum likelihood decoder if all the prior unfrozen bits are correctly decoded, which enables further complexity reduction. Simulation results demonstrate that the proposed low complexity SCL decoder attains performance similar to that of the conventional SCL decoder, while achieving substantial complexity reduction.