Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1509.02815 · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Characterizing a four-qubit planar lattice for arbitrary error detection

Jerry M. Chow, Srikanth J. Srinivasan, Easwar Magesan, A. D. Córcoles, David W. Abraham, Jay M. Gambetta, Matthias Steffen

Published May 21, 2015• 21 citations
arXivHTMLPDF

Abstract

Quantum error correction will be a necessary component towards realizing scalable quantum computers with physical qubits. Theoretically, it is possible to perform arbitrarily long computations if the error rate is below a threshold value. The two-dimensional surface code permits relatively high fault-tolerant thresholds at the ~1% level, and only requires a latticed network of qubits with nearest-neighbor interactions. Superconducting qubits have continued to steadily improve in coherence, gate, and readout fidelities, to become a leading candidate for implementation into larger quantum networks. Here we describe characterization experiments and calibration of a system of four superconducting qubits arranged in a planar lattice, amenable to the surface code. Insights into the particular qubit design and comparison between simulated parameters and experimentally determined parameters are given. Single- and two-qubit gate tune-up procedures are described and results for simultaneously benchmarking pairs of two-qubit gates are given. All controls are eventually used for an arbitrary error detection protocol described in separate work [Corcoles et al., Nature Communications, 6, 2015].

DOI
10.1117/12.2192740

Related papers

A strand of a surface code fabric with superconducting qubits

Jerry M. Chow

Quantum error correction will be a necessary component towards realizing scalable quantum computers with physical qubits. Theoretically, it is possible to perform arbitrarily long computations so long as the error rate is below a threshold value. The two-dimensional surface code permits relatively high fault-tolerant thresholds at the ∼ 1% level, and only requires a latticed network of qubits with nearest-neighbor interactions. I will discuss our implementation of a sub-section of the larger fabric using three transmon qubits and two linking microwave resonators. We demonstrate high-fidelity control over the sub-section surface code strand, verified via quantum prcoess tomography and randomized benchmarking experiments. Our fixed-frequency qubit approach relies on the two-qubit cross-resonance microwave driving interaction, which is now one of many microwave-based entangling gate protocols. I will also discuss the prospects to scale to surface code plaquette level experiments.

Bulletin of the American Physical Society•Mar 21, 2013•0 citations

A superconducting surface-code processor with lattice-surgery logical operations

Yanzhe Wang, Fanhao Shen, Haipeng Xie +31 more

Fault-tolerant logical operations are fundamental for scalable quantum computation. Here, we report the experimental realization of lattice-surgery operations between a pair of distance-three surface-code logical qubits on a planar superconducting processor. During repeated syndrome extraction cycles, the logical qubits exhibit per-cycle error rates of $0.0365(2)$ and $0.0282(1)$, respectively, after leakage events are rejected. By leveraging joint initialization and lattice splitting, we deterministically prepare a logical Bell state, confirming genuine bipartite entanglement via the error-corrected logical state fidelity. We further execute a two-qubit Deutsch-Jozsa algorithm at the logical level to demonstrate algorithmic utility in a fault-tolerant framework. Finally, to achieve universal control, we implement magic-state injection and gate teleportation to realize continuous non-Clifford rotations about the logical $X$ axis. For the logical $R_{X}(π/4)$ gate, we achieve a logical gate fidelity of $0.943_{-9}^{+10}$ conditioned on the absence of detected errors. These results establish lattice surgery as a practical and versatile paradigm for logical computation in near-term surface-code architectures, representing a critical milestone toward scalable fault-tolerant quantum advantage in superconducting circuits.

quant-pharXiv:2606.06598•Jun 8, 2026•0 citations

Demonstration of a quantum error detection code using a square lattice of four superconducting qubits

Antonio D. Corcoles, Easwar Magesan, Srikanth J. Srinivasan +4 more

The ability to detect and deal with errors when manipulating quantum systems is a fundamental requirement for fault-tolerant quantum computing. Unlike classical bits that are subject to only digital bit-flip errors, quantum bits are susceptible to a much larger spectrum of errors, for which any complete quantum error-correcting code must account. Whilst classical bit-flip detection can be realized via a linear array of qubits, a general fault-tolerant quantum error-correcting code requires extending into a higher-dimensional lattice. Here we present a quantum error detection protocol on a two-by-two planar lattice of superconducting qubits. The protocol detects an arbitrary quantum error on an encoded two-qubit entangled state via quantum non-demolition parity measurements on another pair of error syndrome qubits. This result represents a building block towards larger lattices amenable to fault-tolerant quantum error correction architectures such as the surface code.

arXiv:1410.6419•Nature Communications•Apr 29, 2015•487 citations

Towards logical entanglement creation in trivalent planar architectures

Lukas Bödeker, Luis Colmenarez, Sergey Blinov +3 more

Low-overhead quantum error-correction schemes are essential for enabling quantum computation on registers containing multiple logical qubits. For planar architectures with limited nearest-neighbor qubit connectivity, the surface code has emerged as the leading paradigm. Recent theoretical and experimental work has shown that a physical-qubit connectivity of degree three is sufficient to implement fault-tolerant quantum error correction. In this work, we study lattice surgery in the context of such trivalent architectures and introduce scalable circuit constructions to implement it. Compared with the four-valent measurement scheme, the trivalent lattice-surgery protocol reduces the required resources by $\mathcal{O}(d)$ qubits out of a total qubit count of $\mathcal{O}(d^2)$ and by $\mathcal{O}(d)$ two-qubit gates out of a total two-qubit gate count of $\mathcal{O}(d^3)$. We benchmark the logical fidelity of both lattice-surgery schemes in terms of experimentally realistic simulations targeting an implementation with a fluxonium qubit based architecture and find a potential improvement of up to $\approx25\%$ for distance-three. These results open a way for scalable planar trivalent qubit architectures to host a surface-code-based logical quantum processor.

quant-pharXiv:2607.15044•Jul 17, 2026•0 citations

Proof of Finite Surface Code Threshold for Matching

Austin G. Fowler

The field of quantum computation currently lacks a formal proof of experimental feasibility. Qubits are fragile and sophisticated quantum error correction is required to achieve reliable quantum computation. The surface code is a promising quantum error correction code, requiring only a physically reasonable 2D lattice of qubits with nearest neighbor interactions. However, existing proofs that reliable quantum computation is possible using this code assume the ability to measure four-body operators and, despite making this difficult to realize assumption, require that the error rate of these operator measurements is less than 10(-9), an unphysically low target. High error rates have been proved tolerable only when assuming tunable interactions of strength and error rate independent of distance, which is also unphysical. In this work, given a 2D lattice of qubits with only nearest neighbor two-qubit gates, and single-qubit measurement, initialization, and unitary gates, all of which have error rate p, we prove that arbitrarily reliable quantum computation is possible provided p < 7.4 × 10(-4), a target that many experiments have already achieved. This closes a long-standing open problem, formally proving the experimental feasibility of quantum computation under physically reasonable assumptions.

arXiv:1206.0800•Physical Review Letters•Nov 2, 2012•55 citations

Fault-tolerant superconducting qubits

J. Kelly

For quantum computing to become viable, the inherently fallible nature of qubits must be overcome with quantum error correction (QEC). QEC requires coherent qubits, in a configuration compatible with a given QEC scheme, and quantum logic operations with sufficiently low error. In this thesis, we perform a series of targeted experiments to achieve these goals on a path toward realizing the surface code QEC scheme. We first develop the Xmon variant of the transmon qubit, a highly coherent, planar, and frequency tunable superconducting qubit. With coherence demonstrated, we build an array of five Xmon qubits in a configuration compatible with the surface code, and demonstrate quantum logic operations with sufficiently low error to employ the surface code. These logic gates are characterized with randomized benchmarking, a protocol for determining gate error. We find applications of randomized benchmarking beyond the intended use in gate optimization and decoherence characterization, in addition to exploring the fundamental assumptions of randomized benchmarking. Lastly, we build a nine qubit Xmon transmon array and demonstrate correction of environmental bit-flip errors in a precursor to the surface code.

•Jan 1, 2015•13 citations
Quantum error correction will be a necessary component towards realizing scalable quantum computers with physical qubits. Theoretically, it is possible to perform arbitrarily long computations if the error rate is below a threshold value. The two-dimensional surface code permits relatively high fault-tolerant thresholds at the ~1% level, and only requires a latticed network of qubits with nearest-neighbor interactions. Superconducting qubits have continued to steadily improve in coherence, gate, and readout fidelities, to become a leading candidate for implementation into larger quantum networks. Here we describe characterization experiments and calibration of a system of four superconducting qubits arranged in a planar lattice, amenable to the surface code. Insights into the particular qubit design and comparison between simulated parameters and experimentally determined parameters are given. Single- and two-qubit gate tune-up procedures are described and results for simultaneously benchmarking pairs of two-qubit gates are given. All controls are eventually used for an arbitrary error detection protocol described in separate work [Corcoles et al., Nature Communications, 6, 2015].
Quantum error correction will be a necessary component towards realizing scalable quantum computers with physical qubits. Theoretically, it is possible to perform arbitrarily long computations so long as the error rate is below a threshold value. The two-dimensional surface code permits relatively high fault-tolerant thresholds at the ∼ 1% level, and only requires a latticed network of qubits with nearest-neighbor interactions. I will discuss our implementation of a sub-section of the larger fabric using three transmon qubits and two linking microwave resonators. We demonstrate high-fidelity control over the sub-section surface code strand, verified via quantum prcoess tomography and randomized benchmarking experiments. Our fixed-frequency qubit approach relies on the two-qubit cross-resonance microwave driving interaction, which is now one of many microwave-based entangling gate protocols. I will also discuss the prospects to scale to surface code plaquette level experiments.
Fault-tolerant logical operations are fundamental for scalable quantum computation. Here, we report the experimental realization of lattice-surgery operations between a pair of distance-three surface-code logical qubits on a planar superconducting processor. During repeated syndrome extraction cycles, the logical qubits exhibit per-cycle error rates of 0.0365(2)0.0365(2)0.0365(2) and 0.0282(1)0.0282(1)0.0282(1), respectively, after leakage events are rejected. By leveraging joint initialization and lattice splitting, we deterministically prepare a logical Bell state, confirming genuine bipartite entanglement via the error-corrected logical state fidelity. We further execute a two-qubit Deutsch-Jozsa algorithm at the logical level to demonstrate algorithmic utility in a fault-tolerant framework. Finally, to achieve universal control, we implement magic-state injection and gate teleportation to realize continuous non-Clifford rotations about the logical XXX axis. For the logical RX(π/4)R_{X}(π/4)RX​(π/4) gate, we achieve a logical gate fidelity of 0.943−9+100.943_{-9}^{+10}0.943−9+10​ conditioned on the absence of detected errors. These results establish lattice surgery as a practical and versatile paradigm for logical computation in near-term surface-code architectures, representing a critical milestone toward scalable fault-tolerant quantum advantage in superconducting circuits.
The ability to detect and deal with errors when manipulating quantum systems is a fundamental requirement for fault-tolerant quantum computing. Unlike classical bits that are subject to only digital bit-flip errors, quantum bits are susceptible to a much larger spectrum of errors, for which any complete quantum error-correcting code must account. Whilst classical bit-flip detection can be realized via a linear array of qubits, a general fault-tolerant quantum error-correcting code requires extending into a higher-dimensional lattice. Here we present a quantum error detection protocol on a two-by-two planar lattice of superconducting qubits. The protocol detects an arbitrary quantum error on an encoded two-qubit entangled state via quantum non-demolition parity measurements on another pair of error syndrome qubits. This result represents a building block towards larger lattices amenable to fault-tolerant quantum error correction architectures such as the surface code.
Low-overhead quantum error-correction schemes are essential for enabling quantum computation on registers containing multiple logical qubits. For planar architectures with limited nearest-neighbor qubit connectivity, the surface code has emerged as the leading paradigm. Recent theoretical and experimental work has shown that a physical-qubit connectivity of degree three is sufficient to implement fault-tolerant quantum error correction. In this work, we study lattice surgery in the context of such trivalent architectures and introduce scalable circuit constructions to implement it. Compared with the four-valent measurement scheme, the trivalent lattice-surgery protocol reduces the required resources by O(d)\mathcal{O}(d)O(d) qubits out of a total qubit count of O(d2)\mathcal{O}(d^2)O(d2) and by O(d)\mathcal{O}(d)O(d) two-qubit gates out of a total two-qubit gate count of O(d3)\mathcal{O}(d^3)O(d3). We benchmark the logical fidelity of both lattice-surgery schemes in terms of experimentally realistic simulations targeting an implementation with a fluxonium qubit based architecture and find a potential improvement of up to ≈25%\approx25\%≈25% for distance-three. These results open a way for scalable planar trivalent qubit architectures to host a surface-code-based logical quantum processor.
The field of quantum computation currently lacks a formal proof of experimental feasibility. Qubits are fragile and sophisticated quantum error correction is required to achieve reliable quantum computation. The surface code is a promising quantum error correction code, requiring only a physically reasonable 2D lattice of qubits with nearest neighbor interactions. However, existing proofs that reliable quantum computation is possible using this code assume the ability to measure four-body operators and, despite making this difficult to realize assumption, require that the error rate of these operator measurements is less than 10(-9), an unphysically low target. High error rates have been proved tolerable only when assuming tunable interactions of strength and error rate independent of distance, which is also unphysical. In this work, given a 2D lattice of qubits with only nearest neighbor two-qubit gates, and single-qubit measurement, initialization, and unitary gates, all of which have error rate p, we prove that arbitrarily reliable quantum computation is possible provided p < 7.4 × 10(-4), a target that many experiments have already achieved. This closes a long-standing open problem, formally proving the experimental feasibility of quantum computation under physically reasonable assumptions.
For quantum computing to become viable, the inherently fallible nature of qubits must be overcome with quantum error correction (QEC). QEC requires coherent qubits, in a configuration compatible with a given QEC scheme, and quantum logic operations with sufficiently low error. In this thesis, we perform a series of targeted experiments to achieve these goals on a path toward realizing the surface code QEC scheme. We first develop the Xmon variant of the transmon qubit, a highly coherent, planar, and frequency tunable superconducting qubit. With coherence demonstrated, we build an array of five Xmon qubits in a configuration compatible with the surface code, and demonstrate quantum logic operations with sufficiently low error to employ the surface code. These logic gates are characterized with randomized benchmarking, a protocol for determining gate error. We find applications of randomized benchmarking beyond the intended use in gate optimization and decoherence characterization, in addition to exploring the fundamental assumptions of randomized benchmarking. Lastly, we build a nine qubit Xmon transmon array and demonstrate correction of environmental bit-flip errors in a precursor to the surface code.