Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1410.6419 · Nature Communications

Demonstration of a quantum error detection code using a square lattice of four superconducting qubits

Antonio D. Corcoles, Easwar Magesan, Srikanth J. Srinivasan, Andrew W. Cross, Matthias Steffen, Jay Gambetta, Jerry M. Chow

Published Apr 29, 2015• 487 citations
arXivHTMLPDF

Abstract

The ability to detect and deal with errors when manipulating quantum systems is a fundamental requirement for fault-tolerant quantum computing. Unlike classical bits that are subject to only digital bit-flip errors, quantum bits are susceptible to a much larger spectrum of errors, for which any complete quantum error-correcting code must account. Whilst classical bit-flip detection can be realized via a linear array of qubits, a general fault-tolerant quantum error-correcting code requires extending into a higher-dimensional lattice. Here we present a quantum error detection protocol on a two-by-two planar lattice of superconducting qubits. The protocol detects an arbitrary quantum error on an encoded two-qubit entangled state via quantum non-demolition parity measurements on another pair of error syndrome qubits. This result represents a building block towards larger lattices amenable to fault-tolerant quantum error correction architectures such as the surface code.

DOI
10.1038/ncomms7979

Related papers

Characterizing a four-qubit planar lattice for arbitrary error detection

Jerry M. Chow, Srikanth J. Srinivasan, Easwar Magesan +4 more

Quantum error correction will be a necessary component towards realizing scalable quantum computers with physical qubits. Theoretically, it is possible to perform arbitrarily long computations if the error rate is below a threshold value. The two-dimensional surface code permits relatively high fault-tolerant thresholds at the ~1% level, and only requires a latticed network of qubits with nearest-neighbor interactions. Superconducting qubits have continued to steadily improve in coherence, gate, and readout fidelities, to become a leading candidate for implementation into larger quantum networks. Here we describe characterization experiments and calibration of a system of four superconducting qubits arranged in a planar lattice, amenable to the surface code. Insights into the particular qubit design and comparison between simulated parameters and experimentally determined parameters are given. Single- and two-qubit gate tune-up procedures are described and results for simultaneously benchmarking pairs of two-qubit gates are given. All controls are eventually used for an arbitrary error detection protocol described in separate work [Corcoles et al., Nature Communications, 6, 2015].

arXiv:1509.02815•Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 21, 2015•21 citations

Lattice surgery realized on two distance-three repetition codes with superconducting qubits

Ilya S. Besedin, Michael Kerschbaum, Jonathan Knoll +12 more

Quantum error correction is needed for quantum computers to be capable of executing algorithms using hundreds of logical qubits in a fault-tolerant manner. Recent experiments have progressed towards this by demonstrating sufficiently low error rates for state preservation of a single logical qubit. However, quantum computation algorithms also require that these logical qubits can be entangled and that gate operations can be performed on them. Lattice surgery is a technique that offers a practical approach for implementing such gates, particularly in planar quantum processor layouts. Here we demonstrate lattice surgery between two distance-three repetition-code qubits by splitting a single distance-three surface-code qubit. Using a quantum circuit that is fault-tolerant for bit-flip errors, we achieve an improvement in the value of the decoded ZZ logical two-qubit observable compared with a similar non-encoded circuit. We therefore demonstrate the functional building blocks needed for lattice-surgery operations on larger-distance codes based on superconducting circuits.

•Feb 1, 2026•0 citations

Detecting bit-flip errors in a logical qubit using stabilizer measurements

Diego Ristè, Stefano Poletto, Meng-Zi Huang +4 more

Quantum data are susceptible to decoherence induced by the environment and to errors in the hardware processing it. A future fault-tolerant quantum computer will use quantum error correction to actively protect against both. In the smallest error correction codes, the information in one logical qubit is encoded in a two-dimensional subspace of a larger Hilbert space of multiple physical qubits. For each code, a set of non-demolition multi-qubit measurements, termed stabilizers, can discretize and signal physical qubit errors without collapsing the encoded information. Here using a five-qubit superconducting processor, we realize the two parity measurements comprising the stabilizers of the three-qubit repetition code protecting one logical qubit from physical bit-flip errors. While increased physical qubit coherence times and shorter quantum error correction blocks are required to actively safeguard the quantum information, this demonstration is a critical step towards larger codes based on multiple parity measurements.

arXiv:1411.5542•Nature Communications•Apr 29, 2015•261 citations

A superconducting surface-code processor with lattice-surgery logical operations

Yanzhe Wang, Fanhao Shen, Haipeng Xie +31 more

Fault-tolerant logical operations are fundamental for scalable quantum computation. Here, we report the experimental realization of lattice-surgery operations between a pair of distance-three surface-code logical qubits on a planar superconducting processor. During repeated syndrome extraction cycles, the logical qubits exhibit per-cycle error rates of $0.0365(2)$ and $0.0282(1)$, respectively, after leakage events are rejected. By leveraging joint initialization and lattice splitting, we deterministically prepare a logical Bell state, confirming genuine bipartite entanglement via the error-corrected logical state fidelity. We further execute a two-qubit Deutsch-Jozsa algorithm at the logical level to demonstrate algorithmic utility in a fault-tolerant framework. Finally, to achieve universal control, we implement magic-state injection and gate teleportation to realize continuous non-Clifford rotations about the logical $X$ axis. For the logical $R_{X}(π/4)$ gate, we achieve a logical gate fidelity of $0.943_{-9}^{+10}$ conditioned on the absence of detected errors. These results establish lattice surgery as a practical and versatile paradigm for logical computation in near-term surface-code architectures, representing a critical milestone toward scalable fault-tolerant quantum advantage in superconducting circuits.

quant-pharXiv:2606.06598•Jun 8, 2026•0 citations

Lattice surgery realized on two distance-three repetition codes with superconducting qubits

Ilya S. Besedin, Michael Kerschbaum, Jonathan Knoll +12 more

Abstract Quantum error correction is needed for quantum computers to be capable of executing algorithms using hundreds of logical qubits in a fault-tolerant manner. Recent experiments have progressed towards this by demonstrating sufficiently low error rates for state preservation of a single logical qubit. However, quantum computation algorithms also require that these logical qubits can be entangled and that gate operations can be performed on them. Lattice surgery is a technique that offers a practical approach for implementing such gates, particularly in planar quantum processor layouts. Here we demonstrate lattice surgery between two distance-three repetition-code qubits by splitting a single distance-three surface-code qubit. Using a quantum circuit that is fault-tolerant for bit-flip errors, we achieve an improvement in the value of the decoded Z Z logical two-qubit observable compared with a similar non-encoded circuit. We therefore demonstrate the functional building blocks needed for lattice-surgery operations on larger-distance codes based on superconducting circuits.

arXiv:2501.04612•Nature Physics•Jan 30, 2026•9 citations

Error Correction in a Distributed Quantum Computer

E. M. Ainley, A. Agrawal, T. Araki +12 more

Building fault-tolerant quantum computers with large numbers of logical qubits requires both scalable hardware architectures and error-correcting codes that make efficient use of physical qubits. Photonic interconnects address both of these challenges by allowing the physical qubits to be distributed across multiple processors while providing the non-local connectivity necessary to implement resource-efficient codes such as high-rate quantum low-density parity-check (qLDPC) codes. A key requirement for realising this architecture is the ability to perform stabiliser measurements between remote processors, which has not previously been demonstrated experimentally. Here we report the first experimental demonstration of distributed quantum error detection and correction. We generate entanglement between network qubits in two separate trapped-ion processors and use it to perform remote syndrome measurements on data qubits. We first realise a distributed [[2, 1, 1]] repetition code, detecting phase-flip errors on a logical qubit encoded across the two modules in real time and suppressing logical errors. We then combine these mid-circuit syndrome measurements with real-time feedforward to actively correct arbitrary single-qubit Pauli errors on a distributed Bell state. These results provide an experimental foundation for quantum error correction (QEC) across modular quantum architectures.

quant-pharXiv:2609.13065•Sep 14, 2026•0 citations
The ability to detect and deal with errors when manipulating quantum systems is a fundamental requirement for fault-tolerant quantum computing. Unlike classical bits that are subject to only digital bit-flip errors, quantum bits are susceptible to a much larger spectrum of errors, for which any complete quantum error-correcting code must account. Whilst classical bit-flip detection can be realized via a linear array of qubits, a general fault-tolerant quantum error-correcting code requires extending into a higher-dimensional lattice. Here we present a quantum error detection protocol on a two-by-two planar lattice of superconducting qubits. The protocol detects an arbitrary quantum error on an encoded two-qubit entangled state via quantum non-demolition parity measurements on another pair of error syndrome qubits. This result represents a building block towards larger lattices amenable to fault-tolerant quantum error correction architectures such as the surface code.
Quantum error correction will be a necessary component towards realizing scalable quantum computers with physical qubits. Theoretically, it is possible to perform arbitrarily long computations if the error rate is below a threshold value. The two-dimensional surface code permits relatively high fault-tolerant thresholds at the ~1% level, and only requires a latticed network of qubits with nearest-neighbor interactions. Superconducting qubits have continued to steadily improve in coherence, gate, and readout fidelities, to become a leading candidate for implementation into larger quantum networks. Here we describe characterization experiments and calibration of a system of four superconducting qubits arranged in a planar lattice, amenable to the surface code. Insights into the particular qubit design and comparison between simulated parameters and experimentally determined parameters are given. Single- and two-qubit gate tune-up procedures are described and results for simultaneously benchmarking pairs of two-qubit gates are given. All controls are eventually used for an arbitrary error detection protocol described in separate work [Corcoles et al., Nature Communications, 6, 2015].
Quantum error correction is needed for quantum computers to be capable of executing algorithms using hundreds of logical qubits in a fault-tolerant manner. Recent experiments have progressed towards this by demonstrating sufficiently low error rates for state preservation of a single logical qubit. However, quantum computation algorithms also require that these logical qubits can be entangled and that gate operations can be performed on them. Lattice surgery is a technique that offers a practical approach for implementing such gates, particularly in planar quantum processor layouts. Here we demonstrate lattice surgery between two distance-three repetition-code qubits by splitting a single distance-three surface-code qubit. Using a quantum circuit that is fault-tolerant for bit-flip errors, we achieve an improvement in the value of the decoded ZZ logical two-qubit observable compared with a similar non-encoded circuit. We therefore demonstrate the functional building blocks needed for lattice-surgery operations on larger-distance codes based on superconducting circuits.
Quantum data are susceptible to decoherence induced by the environment and to errors in the hardware processing it. A future fault-tolerant quantum computer will use quantum error correction to actively protect against both. In the smallest error correction codes, the information in one logical qubit is encoded in a two-dimensional subspace of a larger Hilbert space of multiple physical qubits. For each code, a set of non-demolition multi-qubit measurements, termed stabilizers, can discretize and signal physical qubit errors without collapsing the encoded information. Here using a five-qubit superconducting processor, we realize the two parity measurements comprising the stabilizers of the three-qubit repetition code protecting one logical qubit from physical bit-flip errors. While increased physical qubit coherence times and shorter quantum error correction blocks are required to actively safeguard the quantum information, this demonstration is a critical step towards larger codes based on multiple parity measurements.
Fault-tolerant logical operations are fundamental for scalable quantum computation. Here, we report the experimental realization of lattice-surgery operations between a pair of distance-three surface-code logical qubits on a planar superconducting processor. During repeated syndrome extraction cycles, the logical qubits exhibit per-cycle error rates of 0.0365(2)0.0365(2)0.0365(2) and 0.0282(1)0.0282(1)0.0282(1), respectively, after leakage events are rejected. By leveraging joint initialization and lattice splitting, we deterministically prepare a logical Bell state, confirming genuine bipartite entanglement via the error-corrected logical state fidelity. We further execute a two-qubit Deutsch-Jozsa algorithm at the logical level to demonstrate algorithmic utility in a fault-tolerant framework. Finally, to achieve universal control, we implement magic-state injection and gate teleportation to realize continuous non-Clifford rotations about the logical XXX axis. For the logical RX(π/4)R_{X}(π/4)RX​(π/4) gate, we achieve a logical gate fidelity of 0.943−9+100.943_{-9}^{+10}0.943−9+10​ conditioned on the absence of detected errors. These results establish lattice surgery as a practical and versatile paradigm for logical computation in near-term surface-code architectures, representing a critical milestone toward scalable fault-tolerant quantum advantage in superconducting circuits.
Abstract Quantum error correction is needed for quantum computers to be capable of executing algorithms using hundreds of logical qubits in a fault-tolerant manner. Recent experiments have progressed towards this by demonstrating sufficiently low error rates for state preservation of a single logical qubit. However, quantum computation algorithms also require that these logical qubits can be entangled and that gate operations can be performed on them. Lattice surgery is a technique that offers a practical approach for implementing such gates, particularly in planar quantum processor layouts. Here we demonstrate lattice surgery between two distance-three repetition-code qubits by splitting a single distance-three surface-code qubit. Using a quantum circuit that is fault-tolerant for bit-flip errors, we achieve an improvement in the value of the decoded Z Z logical two-qubit observable compared with a similar non-encoded circuit. We therefore demonstrate the functional building blocks needed for lattice-surgery operations on larger-distance codes based on superconducting circuits.
Building fault-tolerant quantum computers with large numbers of logical qubits requires both scalable hardware architectures and error-correcting codes that make efficient use of physical qubits. Photonic interconnects address both of these challenges by allowing the physical qubits to be distributed across multiple processors while providing the non-local connectivity necessary to implement resource-efficient codes such as high-rate quantum low-density parity-check (qLDPC) codes. A key requirement for realising this architecture is the ability to perform stabiliser measurements between remote processors, which has not previously been demonstrated experimentally. Here we report the first experimental demonstration of distributed quantum error detection and correction. We generate entanglement between network qubits in two separate trapped-ion processors and use it to perform remote syndrome measurements on data qubits. We first realise a distributed [[2, 1, 1]] repetition code, detecting phase-flip errors on a logical qubit encoded across the two modules in real time and suppressing logical errors. We then combine these mid-circuit syndrome measurements with real-time feedforward to actively correct arbitrary single-qubit Pauli errors on a distributed Bell state. These results provide an experimental foundation for quantum error correction (QEC) across modular quantum architectures.