arXiv:cond-mat/0602604 · Physical Review B

Controllable coupling in phase-coupled flux qubits

Mun Dae Kim

Published Nov 2, 2006• 12 citations

Abstract

We propose a scheme for tunable coupling of phase-coupled flux qubits. The phase-coupling scheme can provide a strong coupling strength of the order of Josephson coupling energy of Josephson junctions in the connecting loop, while the previously studied inductive coupling scheme cannot provide due to small mutual inductance and induced currents. We show that, in order to control the coupling, we need two dc SQUID's in the connecting loop and the control fluxes threading the dc SQUID's must be in opposite directions. The coupling strength is analytically calculated as a function of the control flux at the coresonance point.

DOI: 10.1103/physrevb.74.184501

Related papers

Controllable Flux Coupling for the Integration of Flux Qubits

C. Cosmelli, Maria Gabriella Castellano, F. Chiarello +4 more

We show a novel method for controlling the coupling of flux-based qubits by means of a superconducting transformer with variable flux transfer function. The device is realized by inserting a small hysteretic dc SQUID with unshunted junctions, working as a Josephson junction with flux controlled critical current, in parallel to a superconducting transformer; by varying the magnetic flux coupled to the dc-SQUID, the transfer function for the flux coupled to the transformer can be varied. Measurements carried out on a prototype at 4.2 K show a reduction factor of about 30 between the 'on' and the 'off' states. We discuss the system characteristics and the experimental results.

arXiv:cond-mat/0403690Mar 29, 20041 citation

Flux qubit with a large loop size and tunable Josephson junctions

邓辉, 于海峰, 薛光明 +6 more

We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.

中国物理B：英文版Jan 1, 20120 citations

Flux qubit with a large loop size and tunable Josephson junctions

Hui Deng, Haifeng Yu, Guangming Xue +6 more

Chinese Physics BApr 1, 20122 citations

Design of Novel Coupling Mechanisms between Superconducting Flux Qubits

Gabriel Jaumà

We have analyzed and proposed coupling mechanisms between Three Josephson Junction Flux Qubits (3JJQ). For this, we have developed a numerical method to extract the effective Hamiltonian of a system of coupled qubits via the Schrieffer-Wolff transformation (SWT). We then give a comprehensive introduction to the 3JJQ, and study it analytically by approximating its potential with a Harmonic well. With a clear understanding of the 3JJQs, we use the SWT to gain intuition about their effective dipolar interaction with the electromagnetic field, and use that intuition to propose and study analytically and numerically the capacitive coupling of two 3JJQs via a non-tunable capacitor, and the inductive coupling of two 3JJQs via a tunable Josephson Junction (dc-SQUID), showing that we are able to reproduce non-stoquastic Hamiltonians in the strong-coupling regime.

arXiv:2110.12779Oct 25, 20210 citations

Controllable Coupling of Superconducting Flux Qubits

S. H. W. van der Ploeg, A. Izmalkov, Alec Maassen van den Brink +5 more

We have realized controllable coupling between two three-junction flux qubits by inserting an additional coupler loop between them, containing three Josephson junctions. Two of these are shared with the qubit loops, providing strong qubit-coupler interaction. The third junction gives the coupler a nontrivial current-flux relation; its derivative (i.e., the susceptibility) determines the coupling strength J, which thus is tunable in situ via the coupler's flux bias. In the qubit regime, J was varied from approximately 45 (antiferromagnetic) to approximately -55 mK (ferromagnetic); in particular, J vanishes for an intermediate coupler bias. Measurements on a second sample illuminate the relation between two-qubit tunable coupling and three-qubit behavior.

arXiv:cond-mat/0605588Physical Review LettersFeb 2, 2007188 citations

Design of Novel Coupling Mechanisms between Superconducting Flux Qubits

Gabriel Jaumà Gómez

We have analyzed and proposed coupling mechanisms between Three Josephson Junction Flux Qubits (3JJQ). For this, we have developed a numerical method to extract the effective Hamiltonian of a system of coupled qubits via the Schrieffer-Wolff transformation (SWT). This method is a more efficient version of the one proposed by Ref. [1]. We then give a comprehensive introduction to the 3JJQ, and study it analytically by approximating its potential with a Harmonic well. With a clear understanding of the 3JJQs, we use the SWT to gain intuition about their effective dipolar interaction with the electromagnetic field, and use that intuition to propose and study analytically and numerically the capacitive coupling of two 3JJQs via a non-tunable capacitor, and the inductive coupling of two 3JJQs via a tunable Josephson Junction (dc-SQUID), showing that we are able to reproduce non-stoquastic Hamiltonians in the strong-coupling regime.

Oct 25, 20210 citations