Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/0403690

Controllable Flux Coupling for the Integration of Flux Qubits

C. Cosmelli, Maria Gabriella Castellano, F. Chiarello, Roberto Leoni, Daniela Simeone, G. Torrioli, P. Carelli

Published Mar 29, 2004• 1 citation
arXivHTMLPDF

Abstract

We show a novel method for controlling the coupling of flux-based qubits by means of a superconducting transformer with variable flux transfer function. The device is realized by inserting a small hysteretic dc SQUID with unshunted junctions, working as a Josephson junction with flux controlled critical current, in parallel to a superconducting transformer; by varying the magnetic flux coupled to the dc-SQUID, the transfer function for the flux coupled to the transformer can be varied. Measurements carried out on a prototype at 4.2 K show a reduction factor of about 30 between the 'on' and the 'off' states. We discuss the system characteristics and the experimental results.

DOI
10.48550/arxiv.cond-mat/0403690

Related papers

Variable transformer for controllable flux coupling

Maria Gabriella Castellano, F. Chiarello, Roberto Leoni +4 more

We discuss and demonstrate a prototype of superconducting transformer with a flux transfer function that can be varied in a wide range, by acting on a control parameter. The device is realized by inserting a small hysteretic superconducting quantum interference device (dc-SQUID) with unshunted junctions, working as a Josephson junction with flux-controlled critical current, parallel to a superconducting transformer; by varying the magnetic flux coupled to the dc-SQUID, the transfer function for the flux coupled to the transformer can be varied. This feature can prove particularly appealing in the field of quantum computing, where it could be exploited to achieve a controllable magnetic coupling among flux-based qubits. Measurements carried out on a prototype at 4.2K show a reduction factor of about 30 between the “on” and the “off” states. We discuss the system characteristics and the experimental results.

Applied Physics Letters•Apr 1, 2005•26 citations

Characteristics of Switchable Superconducting Flux Transformer with DC Superconducting Quantum Interference Device

Yoshihiro Shimazu, Takashi Niizeki

We have investigated the flux transfer characteristics of a switchable flux transformer comprising a superconducting loop and a DC superconducting quantum interference device (DC-SQUID). This system can be used to couple multiple flux qubits with a controllable coupling strength. Its characteristics were measured using a flux input coil and a DC-SQUID for readout coupled to the transformer loop in a dilution refrigerator. The observed characteristics are consistent with the calculation results. We have demonstrated the reversal of the slope of the characteristics and the complete switching off of the transformer, which are useful features for its application as a controllable coupler for flux qubits.

arXiv:0705.0841•Japanese Journal of Applied Physics•Apr 1, 2007•1 citation

Josephson devices for controllable flux qubit and interqubit coupling

C. Granata, B. Ruggiero, M. Russo +3 more

We present niobium-based Josephson devices as prototypes for applications to quantum computation with flux qubits. The most interesting feature of this device is the use of a Josephson vertical interferometer for a fine tuning of flux qubit and interquibit coupling. These devices allow a control of the off-diagonal Hamiltonian terms of flux qubit and of the flux transfer function of a superconducting transformer. In the vertical interferometer, the Josephson current is precisely modulated from a maximum to zero with fine control and precision by a small transversal magnetic field parallel to the radio-frequency superconducting loop plane and to the flux transformer.

Applied Physics Letters•Oct 18, 2005•8 citations

Controllable coupling in phase-coupled flux qubits

Mun Dae Kim

We propose a scheme for tunable coupling of phase-coupled flux qubits. The phase-coupling scheme can provide a strong coupling strength of the order of Josephson coupling energy of Josephson junctions in the connecting loop, while the previously studied inductive coupling scheme cannot provide due to small mutual inductance and induced currents. We show that, in order to control the coupling, we need two dc SQUID's in the connecting loop and the control fluxes threading the dc SQUID's must be in opposite directions. The coupling strength is analytically calculated as a function of the control flux at the coresonance point.

arXiv:cond-mat/0602604•Physical Review B•Nov 2, 2006•12 citations

Tunable Josephson Devices for Quantum Computation

Valentina Corato, C. Granata, S. Rombetto +5 more

We present the design and the performances of a vertical Josephson interferometer, which can be inserted within superconducting loops in order to obtain controllable Josephson devices. The most interesting feature of the vertical interferometer is that the Josephson current is precisely controlled by a small transversal magnetic field parallel to the superconducting loop plane and can be modulated from a maximum to zero with high precision. This system can be used to realize a switchable flux transformer to couple quantum bits when desired as well as to vary the critical current of a flux qubit in situ. In the latter application, the vertical interferometer is controlled by a magnetic field orthogonal to the one applied to tilt the qubit potential, thus minimizing the cross talking of the two magnetic fields.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•6 citations

Tunable transformer for qubits based on flux states

Timur V. Filippov, Sergey K. Tolpygo, Jaan Männik +1 more

Flux states of an RF SQUID are promising candidates for the implementation of quantum bits (qubits) for quantum computing. Accurate measurements of the flux states, especially in the time domain, require a controllable coupling between a qubit and a readout circuit (e.g., a dc SQUID magnetometer). Since the readout circuit can also be a source of decoherence, such a controllable coupling also allows one to control (minimize) the back action of the magnetometer. For this purpose we suggest a balanced, tunable transformer. This has a gradiometer configuration such that each arm is broken by a small loop containing two Josephson junctions. As a result the inductance of each arm can be adjusted by an applied bias flux. In the symmetrical case there is no coupling between the qubit and the magnetometer while a desired coupling can be achieved by changing the asymmetry of the arms. Similar transformers may be be useful for achieving controllable, lossless coupling that is required between qubits. Theoretical analysis of the noise back action of the transformer as well as preliminary experimental results are presented.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•26 citations
We show a novel method for controlling the coupling of flux-based qubits by means of a superconducting transformer with variable flux transfer function. The device is realized by inserting a small hysteretic dc SQUID with unshunted junctions, working as a Josephson junction with flux controlled critical current, in parallel to a superconducting transformer; by varying the magnetic flux coupled to the dc-SQUID, the transfer function for the flux coupled to the transformer can be varied. Measurements carried out on a prototype at 4.2 K show a reduction factor of about 30 between the 'on' and the 'off' states. We discuss the system characteristics and the experimental results.
We discuss and demonstrate a prototype of superconducting transformer with a flux transfer function that can be varied in a wide range, by acting on a control parameter. The device is realized by inserting a small hysteretic superconducting quantum interference device (dc-SQUID) with unshunted junctions, working as a Josephson junction with flux-controlled critical current, parallel to a superconducting transformer; by varying the magnetic flux coupled to the dc-SQUID, the transfer function for the flux coupled to the transformer can be varied. This feature can prove particularly appealing in the field of quantum computing, where it could be exploited to achieve a controllable magnetic coupling among flux-based qubits. Measurements carried out on a prototype at 4.2K show a reduction factor of about 30 between the “on” and the “off” states. We discuss the system characteristics and the experimental results.
We have investigated the flux transfer characteristics of a switchable flux transformer comprising a superconducting loop and a DC superconducting quantum interference device (DC-SQUID). This system can be used to couple multiple flux qubits with a controllable coupling strength. Its characteristics were measured using a flux input coil and a DC-SQUID for readout coupled to the transformer loop in a dilution refrigerator. The observed characteristics are consistent with the calculation results. We have demonstrated the reversal of the slope of the characteristics and the complete switching off of the transformer, which are useful features for its application as a controllable coupler for flux qubits.
We present niobium-based Josephson devices as prototypes for applications to quantum computation with flux qubits. The most interesting feature of this device is the use of a Josephson vertical interferometer for a fine tuning of flux qubit and interquibit coupling. These devices allow a control of the off-diagonal Hamiltonian terms of flux qubit and of the flux transfer function of a superconducting transformer. In the vertical interferometer, the Josephson current is precisely modulated from a maximum to zero with fine control and precision by a small transversal magnetic field parallel to the radio-frequency superconducting loop plane and to the flux transformer.
We propose a scheme for tunable coupling of phase-coupled flux qubits. The phase-coupling scheme can provide a strong coupling strength of the order of Josephson coupling energy of Josephson junctions in the connecting loop, while the previously studied inductive coupling scheme cannot provide due to small mutual inductance and induced currents. We show that, in order to control the coupling, we need two dc SQUID's in the connecting loop and the control fluxes threading the dc SQUID's must be in opposite directions. The coupling strength is analytically calculated as a function of the control flux at the coresonance point.
We present the design and the performances of a vertical Josephson interferometer, which can be inserted within superconducting loops in order to obtain controllable Josephson devices. The most interesting feature of the vertical interferometer is that the Josephson current is precisely controlled by a small transversal magnetic field parallel to the superconducting loop plane and can be modulated from a maximum to zero with high precision. This system can be used to realize a switchable flux transformer to couple quantum bits when desired as well as to vary the critical current of a flux qubit in situ. In the latter application, the vertical interferometer is controlled by a magnetic field orthogonal to the one applied to tilt the qubit potential, thus minimizing the cross talking of the two magnetic fields.
Flux states of an RF SQUID are promising candidates for the implementation of quantum bits (qubits) for quantum computing. Accurate measurements of the flux states, especially in the time domain, require a controllable coupling between a qubit and a readout circuit (e.g., a dc SQUID magnetometer). Since the readout circuit can also be a source of decoherence, such a controllable coupling also allows one to control (minimize) the back action of the magnetometer. For this purpose we suggest a balanced, tunable transformer. This has a gradiometer configuration such that each arm is broken by a small loop containing two Josephson junctions. As a result the inductance of each arm can be adjusted by an applied bias flux. In the symmetrical case there is no coupling between the qubit and the magnetometer while a desired coupling can be achieved by changing the asymmetry of the arms. Similar transformers may be be useful for achieving controllable, lossless coupling that is required between qubits. Theoretical analysis of the noise back action of the transformer as well as preliminary experimental results are presented.