We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.

中国物理B：英文版Jan 1, 20120 citations

Gradiometric flux qubits with a tunable gap

M J Schwarz, J Goetz, Z Jiang +4 more

For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.

arXiv:1210.3982New Journal of PhysicsApr 4, 201336 citations

Gradiometric flux qubits with tunable gap

M. J. Schwarz, Jan Goetz, Z Jiang +3 more

Abstract. For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit’s Josephson junctions by a dc SQUID, the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.Abstract. For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit’s Josephson junctions by a dc SQUID, the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.

Aug 17, 201636 citations

Controllable coupling in phase-coupled flux qubits

Mun Dae Kim

We propose a scheme for tunable coupling of phase-coupled flux qubits. The phase-coupling scheme can provide a strong coupling strength of the order of Josephson coupling energy of Josephson junctions in the connecting loop, while the previously studied inductive coupling scheme cannot provide due to small mutual inductance and induced currents. We show that, in order to control the coupling, we need two dc SQUID's in the connecting loop and the control fluxes threading the dc SQUID's must be in opposite directions. The coupling strength is analytically calculated as a function of the control flux at the coresonance point.We propose a scheme for tunable coupling of phase-coupled flux qubits. The phase-coupling scheme can provide a strong coupling strength of the order of Josephson coupling energy of Josephson junctions in the connecting loop, while the previously studied inductive coupling scheme cannot provide due to small mutual inductance and induced currents. We show that, in order to control the coupling, we need two dc SQUID's in the connecting loop and the control fluxes threading the dc SQUID's must be in opposite directions. The coupling strength is analytically calculated as a function of the control flux at the coresonance point.

arXiv:cond-mat/0602604Physical Review BNov 2, 200612 citations

Quantum theory of three-junction flux qubit with non-negligible loop inductance: Towards scalability

Timothy L. Robertson, B. L. T. Plourde, P. A. Reichardt +3 more

The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond $0.5$ , the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond $0.5$, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.

Physical Review BMay 30, 200623 citations

Galvanic coupling of flux qubits: simple theory and tunability

Alec Maassen van den Brink

Galvanic coupling of small-area (three-junction) flux qubits, using shared large Josephson junctions, has been shown to yield appreciable interaction strengths in a flexible design, which does not compromise the junctions' intrinsic good coherence properties. For an introduction, I recapitulate an elementary derivation of the coupling strength, which is subsequently generalized to the case of tunable coupling for a current-biased shared junction. While the ability to vary coupling constants by, say, 20% would be useful in experiments, sign-tunability (implying switchability) is highly preferable for several quantum-computing paradigms. This note sketches two ideas: a "crossbar" design with competing ferro- and antiferromagnetic current-biased tunable couplings, and a "mediated" one involving an extra loop between the qubits. The latter is a variation on proposals for tunable capacitive coupling of charge qubits, and tunable inductive coupling of large-area flux qubits.Galvanic coupling of small-area (three-junction) flux qubits, using shared large Josephson junctions, has been shown to yield appreciable interaction strengths in a flexible design, which does not compromise the junctions' intrinsic good coherence properties. For an introduction, I recapitulate an elementary derivation of the coupling strength, which is subsequently generalized to the case of tunable coupling for a current-biased shared junction. While the ability to vary coupling constants by, say, 20% would be useful in experiments, sign-tunability (implying switchability) is highly preferable for several quantum-computing paradigms. This note sketches two ideas: a "crossbar" design with competing ferro- and antiferromagnetic current-biased tunable couplings, and a "mediated" one involving an extra loop between the qubits. The latter is a variation on proposals for tunable capacitive coupling of charge qubits, and tunable inductive coupling of large-area flux qubits.

arXiv:cond-mat/0605398May 16, 20061 citation

0.5

, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.