Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Design Blueprint: Fidelity of a Single-Photon Router Based on Cavity Reflection from a Coupled Emitter

William Alexander Aldred

Published Nov 12, 2026• 0 citations
Publisher

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159486): A photon reflected from a cavity that contains a coupled emitter acquires a phase that depends on the emitter state. That conditional phase is the working principle of a photon router and of several photon-photon gate proposals, and its usefulness is set by the cooperativity. This study computes the quantities that follow from stated assumptions for a one-sided cavity coupled to a two-level emitter, probed on resonance by a narrowband single photon, using the relations set out in the Methods. The headline results are fidelity at C 5 = 0.9091, fidelity at C 20 = 0.9756, fidelity at C 100 = 0.995, reflection at C 5 = 0.8182, loss at C 20 = 0.09518. The central question is stated as follows: For cooperativities from one half to one hundred, what reflection amplitudes, conditional phase error and routing fidelity follow in the standard input-output model? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Conditional phase shifts approaching pi and gate fidelities limited mainly by cooperativity are the standard theoretical expectations for this geometry, with experiments reporting smaller shifts where cooperativity is modest. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

DOI
10.5281/zenodo.24160278

Related papers

Fidelity of a Single-Photon Router Based on Cavity Reflection from a Coupled Emitter

William Alexander Aldred

A photon reflected from a cavity that contains a coupled emitter acquires a phase that depends on the emitter state. That conditional phase is the working principle of a photon router and of several photon-photon gate proposals, and its usefulness is set by the cooperativity. This study computes the quantities that follow from stated assumptions for a one-sided cavity coupled to a two-level emitter, probed on resonance by a narrowband single photon, using the relations set out in the Methods. The headline results are fidelity at C 5 = 0.9091, fidelity at C 20 = 0.9756, fidelity at C 100 = 0.995, reflection at C 5 = 0.8182, loss at C 20 = 0.09518. The central question is stated as follows: For cooperativities from one half to one hundred, what reflection amplitudes, conditional phase error and routing fidelity follow in the standard input-output model? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Conditional phase shifts approaching pi and gate fidelities limited mainly by cooperativity are the standard theoretical expectations for this geometry, with experiments reporting smaller shifts where cooperativity is modest. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs.

•Nov 12, 2026•1 citation

Design Blueprint: A Quantum-Dot Single-Photon Beacon for Celestial Navigation Fixes

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24138563): A navigation beacon that emits one photon at a time, on a precise clock, offers timing information that a classical beacon cannot mimic and cannot be spoofed into. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 11, 2026•0 citations

Design Blueprint: An Entangled Optical Clock Node for Fifth-Coordinate Phase Synchronisation

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24138448): This paper presents the design of a clock node that distributes synchronisation by entangled photon pairs rather than by classical pulses, and computes what the design can deliver under stated component assumptions. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 11, 2026•0 citations

Design Blueprint: Optical Depth Required for Efficient Electromagnetically Induced Transparency Photon Storage

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159508): Storing a photon as a collective excitation in an atomic ensemble succeeds with a probability that rises with optical depth and falls with decoherence during the storage interval. Optical depth is therefore the first design number for an electromagnetically induced transparency memory. This study computes the quantities that follow from stated assumptions for a rubidium ensemble, control-field optimised at each optical depth, ground-state coherence times of 100 microseconds and 1 millisecond, using the relations set out in the Methods. The headline results are efficiency at d 20 = 0.9773, efficiency at d 100 = 0.9999, depth for 90pct = 8.819, eff d100 with 100us coherence = 0.8187, eff d100 with 1ms coherence = 0.9801. The central question is stated as follows: What optical depth gives ninety percent storage-and-retrieval efficiency in the standard model, and how does a finite ground-state coherence time change that requirement for a ten-microsecond storage? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Laboratory memories report efficiencies from a few percent to above eighty percent, with the highest values in high-optical-depth cold ensembles and cavities. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 12, 2026•0 citations

Design Blueprint: Ring Resonator Size, Loss and Photon Lifetime for an Integrated Heralding Circuit

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159701): On a photonic chip, a ring resonator stores light for a time set by its circumference and its propagation loss. That storage time, together with the free spectral range, decides whether the ring can act as a filter, a delay, or a photon-pair source enhancement. This study computes the quantities that follow from stated assumptions for silicon nitride waveguide rings, group index 2.0, wavelength 1550 nm, propagation loss 0.1, 0.5 and 1.0 dB per centimetre, using the relations set out in the Methods. The headline results are Q at 0.1 dBcm = 3.521e+06, lifetime at 0.1 dBcm s = 2.897e-09, Q at 1 dBcm = 3.521e+05, lifetime at 1 dBcm s = 2.897e-10, FSR at 100 um Hz = 2.386e+11. The central question is stated as follows: For silicon nitride rings of radius 20 to 200 micrometres with stated propagation losses, what quality factor, photon lifetime and free spectral range follow, and which combination reaches a lifetime of one nanosecond? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Integrated rings are reported with quality factors from ten thousand to above ten million depending on material and loss, so the computed table spans the practical interval. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 12, 2026•0 citations

Design Blueprint: Bandwidth and Noise Budget for an Off-Resonant Raman Single-Photon Memory

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159685): An off-resonant Raman memory trades optical depth and control energy for bandwidth: it can accept short photons that a narrowband memory cannot, at the price of a noise floor set by spontaneous scattering from the control field. This study computes the quantities that follow from stated assumptions for a warm caesium vapour Raman memory, photon duration 1 ns, detuning 1 to 5 GHz, control energies spanning an order of magnitude, using the relations set out in the Methods. The headline results are efficiency E4 D2 = 0.8347, noise E4 D2 = 0.08, efficiency E10 D5 = 0.5132, noise E10 D5 = 5.120e-03, bandwidth E4 D2 GHz = 1.5. Further computed values are operating points meeting both = 1. The central question is stated as follows: For stated control pulse energies and detunings, what acceptance bandwidth, storage efficiency and noise photons per pulse follow, and is there an operating point with efficiency above one half and noise below one hundredth of a photon? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Raman memories have demonstrated gigahertz bandwidths with efficiencies of tens of percent and noise levels that remain the main obstacle to single-photon operation. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 12, 2026•0 citations
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159486): A photon reflected from a cavity that contains a coupled emitter acquires a phase that depends on the emitter state. That conditional phase is the working principle of a photon router and of several photon-photon gate proposals, and its usefulness is set by the cooperativity. This study computes the quantities that follow from stated assumptions for a one-sided cavity coupled to a two-level emitter, probed on resonance by a narrowband single photon, using the relations set out in the Methods. The headline results are fidelity at C 5 = 0.9091, fidelity at C 20 = 0.9756, fidelity at C 100 = 0.995, reflection at C 5 = 0.8182, loss at C 20 = 0.09518. The central question is stated as follows: For cooperativities from one half to one hundred, what reflection amplitudes, conditional phase error and routing fidelity follow in the standard input-output model? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Conditional phase shifts approaching pi and gate fidelities limited mainly by cooperativity are the standard theoretical expectations for this geometry, with experiments reporting smaller shifts where cooperativity is modest. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
A photon reflected from a cavity that contains a coupled emitter acquires a phase that depends on the emitter state. That conditional phase is the working principle of a photon router and of several photon-photon gate proposals, and its usefulness is set by the cooperativity. This study computes the quantities that follow from stated assumptions for a one-sided cavity coupled to a two-level emitter, probed on resonance by a narrowband single photon, using the relations set out in the Methods. The headline results are fidelity at C 5 = 0.9091, fidelity at C 20 = 0.9756, fidelity at C 100 = 0.995, reflection at C 5 = 0.8182, loss at C 20 = 0.09518. The central question is stated as follows: For cooperativities from one half to one hundred, what reflection amplitudes, conditional phase error and routing fidelity follow in the standard input-output model? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Conditional phase shifts approaching pi and gate fidelities limited mainly by cooperativity are the standard theoretical expectations for this geometry, with experiments reporting smaller shifts where cooperativity is modest. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24138563): A navigation beacon that emits one photon at a time, on a precise clock, offers timing information that a classical beacon cannot mimic and cannot be spoofed into. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24138448): This paper presents the design of a clock node that distributes synchronisation by entangled photon pairs rather than by classical pulses, and computes what the design can deliver under stated component assumptions. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159508): Storing a photon as a collective excitation in an atomic ensemble succeeds with a probability that rises with optical depth and falls with decoherence during the storage interval. Optical depth is therefore the first design number for an electromagnetically induced transparency memory. This study computes the quantities that follow from stated assumptions for a rubidium ensemble, control-field optimised at each optical depth, ground-state coherence times of 100 microseconds and 1 millisecond, using the relations set out in the Methods. The headline results are efficiency at d 20 = 0.9773, efficiency at d 100 = 0.9999, depth for 90pct = 8.819, eff d100 with 100us coherence = 0.8187, eff d100 with 1ms coherence = 0.9801. The central question is stated as follows: What optical depth gives ninety percent storage-and-retrieval efficiency in the standard model, and how does a finite ground-state coherence time change that requirement for a ten-microsecond storage? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Laboratory memories report efficiencies from a few percent to above eighty percent, with the highest values in high-optical-depth cold ensembles and cavities. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159701): On a photonic chip, a ring resonator stores light for a time set by its circumference and its propagation loss. That storage time, together with the free spectral range, decides whether the ring can act as a filter, a delay, or a photon-pair source enhancement. This study computes the quantities that follow from stated assumptions for silicon nitride waveguide rings, group index 2.0, wavelength 1550 nm, propagation loss 0.1, 0.5 and 1.0 dB per centimetre, using the relations set out in the Methods. The headline results are Q at 0.1 dBcm = 3.521e+06, lifetime at 0.1 dBcm s = 2.897e-09, Q at 1 dBcm = 3.521e+05, lifetime at 1 dBcm s = 2.897e-10, FSR at 100 um Hz = 2.386e+11. The central question is stated as follows: For silicon nitride rings of radius 20 to 200 micrometres with stated propagation losses, what quality factor, photon lifetime and free spectral range follow, and which combination reaches a lifetime of one nanosecond? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Integrated rings are reported with quality factors from ten thousand to above ten million depending on material and loss, so the computed table spans the practical interval. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159685): An off-resonant Raman memory trades optical depth and control energy for bandwidth: it can accept short photons that a narrowband memory cannot, at the price of a noise floor set by spontaneous scattering from the control field. This study computes the quantities that follow from stated assumptions for a warm caesium vapour Raman memory, photon duration 1 ns, detuning 1 to 5 GHz, control energies spanning an order of magnitude, using the relations set out in the Methods. The headline results are efficiency E4 D2 = 0.8347, noise E4 D2 = 0.08, efficiency E10 D5 = 0.5132, noise E10 D5 = 5.120e-03, bandwidth E4 D2 GHz = 1.5. Further computed values are operating points meeting both = 1. The central question is stated as follows: For stated control pulse energies and detunings, what acceptance bandwidth, storage efficiency and noise photons per pulse follow, and is there an operating point with efficiency above one half and noise below one hundredth of a photon? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Raman memories have demonstrated gigahertz bandwidths with efficiencies of tens of percent and noise levels that remain the main obstacle to single-photon operation. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.