Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159685): An off-resonant Raman memory trades optical depth and control energy for bandwidth: it can accept short photons that a narrowband memory cannot, at the price of a noise floor set by spontaneous scattering from the control field. This study computes the quantities that follow from stated assumptions for a warm caesium vapour Raman memory, photon duration 1 ns, detuning 1 to 5 GHz, control energies spanning an order of magnitude, using the relations set out in the Methods. The headline results are efficiency E4 D2 = 0.8347, noise E4 D2 = 0.08, efficiency E10 D5 = 0.5132, noise E10 D5 = 5.120e-03, bandwidth E4 D2 GHz = 1.5. Further computed values are operating points meeting both = 1. The central question is stated as follows: For stated control pulse energies and detunings, what acceptance bandwidth, storage efficiency and noise photons per pulse follow, and is there an operating point with efficiency above one half and noise below one hundredth of a photon? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Raman memories have demonstrated gigahertz bandwidths with efficiencies of tens of percent and noise levels that remain the main obstacle to single-photon operation. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159685): An off-resonant Raman memory trades optical depth and control energy for bandwidth: it can accept short photons that a narrowband memory cannot, at the price of a noise floor set by spontaneous scattering from the control field. This study computes the quantities that follow from stated assumptions for a warm caesium vapour Raman memory, photon duration 1 ns, detuning 1 to 5 GHz, control energies spanning an order of magnitude, using the relations set out in the Methods. The headline results are efficiency E4 D2 = 0.8347, noise E4 D2 = 0.08, efficiency E10 D5 = 0.5132, noise E10 D5 = 5.120e-03, bandwidth E4 D2 GHz = 1.5. Further computed values are operating points meeting both = 1. The central question is stated as follows: For stated control pulse energies and detunings, what acceptance bandwidth, storage efficiency and noise photons per pulse follow, and is there an operating point with efficiency above one half and noise below one hundredth of a photon? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Raman memories have demonstrated gigahertz bandwidths with efficiencies of tens of percent and noise levels that remain the main obstacle to single-photon operation. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
An off-resonant Raman memory trades optical depth and control energy for bandwidth: it can accept short photons that a narrowband memory cannot, at the price of a noise floor set by spontaneous scattering from the control field. This study computes the quantities that follow from stated assumptions for a warm caesium vapour Raman memory, photon duration 1 ns, detuning 1 to 5 GHz, control energies spanning an order of magnitude, using the relations set out in the Methods. The headline results are efficiency E4 D2 = 0.8347, noise E4 D2 = 0.08, efficiency E10 D5 = 0.5132, noise E10 D5 = 5.120e-03, bandwidth E4 D2 GHz = 1.5. Further computed values are operating points meeting both = 1. The central question is stated as follows: For stated control pulse energies and detunings, what acceptance bandwidth, storage efficiency and noise photons per pulse follow, and is there an operating point with efficiency above one half and noise below one hundredth of a photon? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Raman memories have demonstrated gigahertz bandwidths with efficiencies of tens of percent and noise levels that remain the main obstacle to single-photon operation. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159508): Storing a photon as a collective excitation in an atomic ensemble succeeds with a probability that rises with optical depth and falls with decoherence during the storage interval. Optical depth is therefore the first design number for an electromagnetically induced transparency memory. This study computes the quantities that follow from stated assumptions for a rubidium ensemble, control-field optimised at each optical depth, ground-state coherence times of 100 microseconds and 1 millisecond, using the relations set out in the Methods. The headline results are efficiency at d 20 = 0.9773, efficiency at d 100 = 0.9999, depth for 90pct = 8.819, eff d100 with 100us coherence = 0.8187, eff d100 with 1ms coherence = 0.9801. The central question is stated as follows: What optical depth gives ninety percent storage-and-retrieval efficiency in the standard model, and how does a finite ground-state coherence time change that requirement for a ten-microsecond storage? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Laboratory memories report efficiencies from a few percent to above eighty percent, with the highest values in high-optical-depth cold ensembles and cavities. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Quantum memories are key components in quantum information networks. Their ability to store and retrieve information on demand makes repeat-until-success strategies scalable. Warm alkali-metal vapours are interesting candidates for the implementation of such memories, thanks to their long storage times and experimental simplicity. Operation with the Raman protocol enables high time-bandwidth products, which allows for multiple synchronisation trials of probabilistically operating quantum gates via memory-based temporal multiplexing. This makes the Raman memory a promising tool, whose broad spectral bandwidth facilitates direct interfacing with other photonic primitives, such as single photon sources. Here, such a light-matter interface is implemented in a warm caesium vapour. Firstly, we study the storage of polarisation-encoded information in the memory. High quality polarisation preservation for bright coherent state input signals can be achieved, when operating the Raman memory in a dual-rail configuration inside a polarisation interferometer. Secondly, heralded single photons are stored in the memory. To this end, the memory is operated on-demand by feed-forward of source heralding events, which is a key technological capability. Prior to storage, single photons are produced in a spontaneous parametric down conversion source, whose bespoke design spectrally tailors the photons to the memory acceptance line. The faithful retrieval of stored single photons is found to be currently limited by noise in the memory, with a signal-to-noise ratio of 0.3 in the memory output. Nevertheless, a clear influence of the input's quantum nature is observed in the retrieved light by measuring signal's photon statistics. Finally, the memory noise processes are examined in detail. Four-wave-mixing noise is determined as the sole important noise source for the Raman memory.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159701): On a photonic chip, a ring resonator stores light for a time set by its circumference and its propagation loss. That storage time, together with the free spectral range, decides whether the ring can act as a filter, a delay, or a photon-pair source enhancement. This study computes the quantities that follow from stated assumptions for silicon nitride waveguide rings, group index 2.0, wavelength 1550 nm, propagation loss 0.1, 0.5 and 1.0 dB per centimetre, using the relations set out in the Methods. The headline results are Q at 0.1 dBcm = 3.521e+06, lifetime at 0.1 dBcm s = 2.897e-09, Q at 1 dBcm = 3.521e+05, lifetime at 1 dBcm s = 2.897e-10, FSR at 100 um Hz = 2.386e+11. The central question is stated as follows: For silicon nitride rings of radius 20 to 200 micrometres with stated propagation losses, what quality factor, photon lifetime and free spectral range follow, and which combination reaches a lifetime of one nanosecond? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Integrated rings are reported with quality factors from ten thousand to above ten million depending on material and loss, so the computed table spans the practical interval. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Broadband quantum memories hold great promise as multiplexing elements in future photonic quantum information protocols. Alkali-vapor Raman memories combine high-bandwidth storage, on-demand readout, and operation at room temperature without collisional fluorescence noise. However, previous implementations have required large control pulse energies and have suffered from four-wave-mixing noise. Here, we present a Raman memory where the storage interaction is enhanced by a low-finesse birefringent cavity tuned into simultaneous resonance with the signal and control fields, dramatically reducing the energy required to drive the memory. By engineering antiresonance for the anti-Stokes field, we also suppress the four-wave-mixing noise and report the lowest unconditional noise floor yet achieved in a Raman-type warm vapor memory, (15±2)×10^{-3} photons per pulse, with a total efficiency of (9.5±0.5)%.
We propose a scenario of quantum memory for light based on Raman scattering. The storage medium is a vapor and the different spectral components of the input pulse are stored in different atomic velocity classes. One uses appropriate pulses to reverse the resulting Doppler phase shift and to regenerate the input pulse, without distortion, in the backward direction. The different stages of the protocol are detailed and the recovery efficiency is calculated in the semiclassical picture. Since the memory bandwidth is determined by the Raman transition Doppler width, it can be adjusted by changing the angle between the input pulse wave vector and the control beams. The optical depth also depends on the beam angle. As a consequence the available optical depth can be optimized depending on the needed bandwidth. The predicted recovery efficiency is close to 100% for large optical depth.