arXiv:1706.01104

Room temperature caesium quantum memory for quantum information applications

Patrick Michelberger

Published Jan 1, 2015• 0 citations

Abstract

Quantum memories are key components in quantum information networks. Their ability to store and retrieve information on demand makes repeat-until-success strategies scalable. Warm alkali-metal vapours are interesting candidates for the implementation of such memories, thanks to their long storage times and experimental simplicity. Operation with the Raman protocol enables high time-bandwidth products, which allows for multiple synchronisation trials of probabilistically operating quantum gates via memory-based temporal multiplexing. This makes the Raman memory a promising tool, whose broad spectral bandwidth facilitates direct interfacing with other photonic primitives, such as single photon sources. Here, such a light-matter interface is implemented in a warm caesium vapour. Firstly, we study the storage of polarisation-encoded information in the memory. High quality polarisation preservation for bright coherent state input signals can be achieved, when operating the Raman memory in a dual-rail configuration inside a polarisation interferometer. Secondly, heralded single photons are stored in the memory. To this end, the memory is operated on-demand by feed-forward of source heralding events, which is a key technological capability. Prior to storage, single photons are produced in a spontaneous parametric down conversion source, whose bespoke design spectrally tailors the photons to the memory acceptance line. The faithful retrieval of stored single photons is found to be currently limited by noise in the memory, with a signal-to-noise ratio of 0.3 in the memory output. Nevertheless, a clear influence of the input's quantum nature is observed in the retrieved light by measuring signal's photon statistics. Finally, the memory noise processes are examined in detail. Four-wave-mixing noise is determined as the sole important noise source for the Raman memory.

DOI: 10.48550/arxiv.1706.01104

Related papers

Towards storage and retrieval of non-classical light in a broadband quantum memory - An investigation of free-space and cavity Raman memories

T. F. M. Champion

Photonic quantum information processing has emerged as a powerful platform for realising quantum-enhanced technologies. In order to be scalable, many of these technologies depend on the availability of a suitable quantum memory for the coherent storage and on-demand retrieval of photonic quantum states. In this thesis, I investigate broadband light storage in a room-temperature Raman memory, implemented both in free space and, for the first time, inside a low-finesse optical cavity designed for low-noise operation. The ability of the Raman memory to preserve phase coherence was tested by storing coherent polarisation states in two spatially separate atomic ensembles. Polarisation storage with a fidelity of up to 97 ± 1% was demonstrated by performing full process tomography on the system. The Raman memory was then interfaced for the first time with a spontaneous parametric downconversion (SPDC) source of heralded, GHz-bandwidth single photons. The memory performance was characterised by measuring the second-order autocorrelation of the retrieved fields. While the SPDC input photon statistics showed a clear influence on the statistics of the retrieved field, four-wave mixing (FWM) noise, stimulated by spontaneous Raman scattering, prevented the preservation of non-classical photon statistics during read-out. Suppressing this source of noise represents the last remaining challenge for realising a broadband single-photon Raman memory suitable for quantum information applications. To this end, I demonstrate a novel cavity implementation of the Raman memory which reduces the FWM contribution relative to the signal field by re-distributing the density of states into which the noise photons can be scattered. Cavity-enhanced memory operation was investigated using weak coherent input states, showing a significant improvement of the signal-to-noise ratio compared to the free-space memory implementation. This proof-of-principle demonstration suggests that cavity Raman memories may offer a practical route towards low-noise, high-bandwidth quantum storage at room temperature.

Jan 1, 20150 citations

Interfacing GHz-bandwidth heralded single photons with a warm vapour Raman memory

Patrick Michelberger, T. F. M. Champion, Michael Sprague +8 more

Broadband quantum memories, used as temporal multiplexers, are a key component in photonic quantum information processing, as they make repeat-until-success strategies scalable. We demonstrate a prototype system, operating on-demand, by interfacing a warm vapour, high time-bandwidth-product Raman memory with a travelling wave spontaneous parametric down-conversion source. We store single photons and observe a clear influence of the input photon statistics on the retrieved light, which we find currently to be limited by noise. We develop a theoretical model that identifies four-wave mixing as the sole important noise source and point towards practical solutions for noise-free operation.

arXiv:1405.1470New Journal of PhysicsApr 2, 2015102 citations

Engineering a noise-free quantum memory for temporal mode manipulation

T. M. Hird

An optical quantum memory, a device which can store and retrieve on demand an arbitrary quantum state at the single photon level, has been identified as a significant cornerstone of photonic quantum technologies. The development of such a memory would allow the creation and development of a large number of quantum technologies. These would range from the ability to synchronise processing steps in an optical quantum computer, to the construction of a quantum repeater which would allow faithful transmission of quantum states over arbitrarily long distances. In this thesis I investigate broadband light storage in a room-temperature Raman memory for purposes of quantum information processing with photons. During the course of this thesis, a novel scheme to suppress four-wave mixing noise is simulated, based on equations derived to describe the physics of the memory interaction. The experimental arrangement to test the suppression method is described and an original method using photon statistics is demonstrated. The results of these experiments prove the ability of the memory to retrieve and maintain the non-classicality of the state, given a single photon input. Following the affirmation that, using this noise suppression technique, the memory can function at the single-photon level, I go on to consider how the temporal-spectral properties of a pulsed mode of light may be manipulated using the memory. There are two primary reasons for this investigation: 1) Increasing the efficiency of the read-in process by carving the optimum mode of the memory 2) Using the memory as a device operating in a high dimensional quantum information basis. The restrictions of such applications are considered and a method to test the efficacy of transformations in this basis is devised and experimentally tested. I also perform demonstrations of light storage using conventional temporal modes using a novel method of velocity selection within warm vapour. Finally I detail further experiments that are achievable with the Raman quantum memory given the progress that has been achieved during my DPhil research. The results show that the Raman memory is a viable candidate for a practical route towards low-noise quantum storage and for manipulation of temporal modes of light.

Jan 1, 20210 citations

A noiseless quantum optical memory at room temperature

Patrick M. Ledingham, K. T. Kaczmarek, Benjamin Brecht +7 more

Summary form only given. A quantum optical memory (QM) is a device that can store and release quantum states of light on demand. Such a device is capable of synchronising probabilistic events, for example, locally synchronising non-deterministic photon sources for the generation of multi-photon states, or successful quantum gate operations within a quantum computational architecture [1], as well as for globally synchronising the generation of entanglement over long distances within the context of a quantum repeater [2]. Desirable attributes for a QM to be useful for these computational and communicational tasks include high end-to-end transmission (including storage and retrieval efficiency), large storage-time-bandwidth product, room temperature operation for scalability and, of utmost importance, noise free performance for true quantum operation.Here we present a new QM protocol that addresses the above issues, the quantum ladder memory (QLAD). This protocol is based on a two-photon `ladder' transition between the 6S1/2 ground state and 6D5/2 excited state of a caesium (Cs) ensemble at room temperature (see Fig. 1a). We characterise the memory with weak coherent states, storing GHz-band pulses with η=22% storage and retrieval efficiency and a characteristic storage time of τ=5.3ns. We measure the noise at the output to be 8×10-6 photons per pulse, giving rise to a noise-to-efficiency ratio of 3.6×10-5, three orders of magnitude better than any memory to date. We generate GHz-band heralded single photons from a spontaneous parametric down conversion source that are matched to the QLAD, coincidence traces seen in Fig. 1b. A heralded second-order autocorrelation function of g(2)=0.02+0.005 is measured for the input photon, and true quantum operation is confirmed by storing and retrieving this photon with g(2)=0.03+0.01 for a 3.5ns storage time. This result is the lowest g(2) on the output of an on-demand memory to date, and represents a significant step toward large-scale quantum technologies.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)Jun 1, 20170 citations

A Noiseless Quantum Optical Memory at Room Temperature

K. T. Kaczmarek, Patrick M. Ledingham, Benjamin Brecht +9 more

Quantum optical memories are devices that store quantum states of light, which can allow for the active synchronization of probabilistic events within large-scale quantum networks. Recent work on quantum memories have seen impressive quantum operation, albeit still suffering from noise on the output mode of the device. Here we demonstrate a noise-free quantum memory for light based on the off-resonant cascaded absorption of photons in a warm vapour of caesium atoms. The memory is characterized by measuring a noise floor of 8 × 10−6 photons per pulse. We demonstrate genuine quantum operation by storing and recalling on-demand heralded single photons with a heralded second-order autocorrelation function of g(2) = 0.028 ± 0.009.

Frontiers in OpticsJan 1, 20170 citations

Efficient, low noise, mode-selective quantum memory

Sarah E. Thomas

Photonic quantum information processing is a key element for scalable quantum technologies, and has applications in secure long-distance quantum communication and connecting nodes of a quantum computation network. However, logical photon-photon gates and state-of-the-art single photon sources rely on probabilistic processes. Quantum memories are devices that enable storage and on-demand recall of quantum states of light, and have been highlighted as a vital component in photonic networks to overcome the scaling problem by synchronising probabilistic processes. The Raman memory has a large storage bandwidth and high synchronising capacity, and is an ideal candidate for local synchronisation. However, previous demonstrations of the Raman memory suffer from four-wave mixing noise, which prohibits quantum level operation. In this thesis I investigate methods to increase the signal to noise ratio in the Raman memory. I investigate increasing the light-matter coupling strength to boost the memory efficiency, and then explore two different methods to suppress four-wave mixing noise. I demonstrate that operating the Raman memory in a cavity is successful in reducing four-wave mixing, but it is technically challenging to maintain a high memory efficiency. I investigate a new method of noise suppression by introducing an absorption feature at the frequency of the unwanted noise field. This technically simple method is successful in reducing the noise by an order of magnitude, and will be applicable to many quantum memory protocols. In the final section of this thesis I explore the temporal mode properties of the Raman memory. I demonstrate that the Raman memory is single mode and can be used to separate and manipulate temporal modes of light. This positions the Raman memory as a key device for enabling high-dimensional photonic quantum information processing, and enhancing light-matter interactions. These results pave the way towards an efficient, low-noise, mode-selective quantum memory.

Apr 1, 20190 citations