Superconducting quantum circuits have emerged as a leading platform for building large-scale quantum computers, owing to their ability to engineer strong, highly tunable interactions. However, achieving high-fidelity quantum operations requires overcoming the fundamental isolation-andcontrol challenge: qubits must be well-isolated from their electromagnetic environment to maintain long coherence times, yet they require strong external coupling for fast control, readout, and initialization. In current architectures, this trade-off often demands complex auxiliary circuitry that can introduce additional noise and thermal loads. This thesis presents novel circuit designs and control techniques to address the isolation-and-control challenge in superconducting transmon qubits. First, we introduce integrated on-chip filters, in particular, 𝜆/4 and 𝜆/2 transmission line filters that exhibit a stopband at the qubit frequency. This design protects the qubit from Purcell decay, yielding up to a 200-fold improvement in the energy relaxation time 𝑇1 at the stopband. To achieve fast single-qubit gates despite this isolation, we employ subharmonic driving, demonstrating sub-ten-nanosecond control and Rabi oscillations with a 12-ns pulse duration while significantly reducing the cryogenic thermal load. Building upon these static filters, we propose and experimentally demonstrate the quantum dial, a dynamically tunable band-stop filter consisting of a series array of direct-current superconducting quantum interference devices. The quantum dial enables on-demand tuning of the qubit–environment coupling, including a reduction of 𝑇1 from over 150 μs to roughly 200 ns, while introducing minimal ac Stark shifts. We demonstrate its versatility by dialing between three operational regimes: an idle state with 99.99% fidelity, a control state enabling 99.9% fidelity for 40-ns single-qubit gates at −110 dBm, and a strongly coupled state for unconditional, state-independent qubit reset. Furthermore, the quantum dial enables qubit thermometry close to the quantum-Fisherinformation bound, with a noise-equivalent temperature down to 0.6 mK/√Hz at 60 mK. Alongside the development of these dedicated control architectures, this thesis contributes to the broader framework of circuit quantum electrodynamics by advancing specific microwave engineering and characterization techniques. In particular, we explore the miniaturization of circuit footprints through the realization of compact sub-gigahertz inductor-capacitor resonators. Additionally, we contribute to the optimization of unconditional qubit reset using a single-junction quantum-circuit refrigerator, and to the advanced characterization of microwave fields via computed tomography of propagating microwave photons. In summary, these results demonstrate fixed and tunable drive-line filters that suppress idle-state radiative decay while preserving selected control, reset, and thermometry operations. By replacing static coupling compromises with temporally programmable environments, these architectures offer a promising route to reducing noise, mitigating crosstalk, and accelerating error-correction cycles in future superconducting quantum processors.
Superconducting quantum circuits have emerged as a leading platform for building large-scale quantum computers, owing to their ability to engineer strong, highly tunable interactions. However, achieving high-fidelity quantum operations requires overcoming the fundamental isolation-andcontrol challenge: qubits must be well-isolated from their electromagnetic environment to maintain long coherence times, yet they require strong external coupling for fast control, readout, and initialization. In current architectures, this trade-off often demands complex auxiliary circuitry that can introduce additional noise and thermal loads. This thesis presents novel circuit designs and control techniques to address the isolation-and-control challenge in superconducting transmon qubits. First, we introduce integrated on-chip filters, in particular, 𝜆/4 and 𝜆/2 transmission line filters that exhibit a stopband at the qubit frequency. This design protects the qubit from Purcell decay, yielding up to a 200-fold improvement in the energy relaxation time 𝑇1 at the stopband. To achieve fast single-qubit gates despite this isolation, we employ subharmonic driving, demonstrating sub-ten-nanosecond control and Rabi oscillations with a 12-ns pulse duration while significantly reducing the cryogenic thermal load. Building upon these static filters, we propose and experimentally demonstrate the quantum dial, a dynamically tunable band-stop filter consisting of a series array of direct-current superconducting quantum interference devices. The quantum dial enables on-demand tuning of the qubit–environment coupling, including a reduction of 𝑇1 from over 150 μs to roughly 200 ns, while introducing minimal ac Stark shifts. We demonstrate its versatility by dialing between three operational regimes: an idle state with 99.99% fidelity, a control state enabling 99.9% fidelity for 40-ns single-qubit gates at −110 dBm, and a strongly coupled state for unconditional, state-independent qubit reset. Furthermore, the quantum dial enables qubit thermometry close to the quantum-Fisherinformation bound, with a noise-equivalent temperature down to 0.6 mK/√Hz at 60 mK. Alongside the development of these dedicated control architectures, this thesis contributes to the broader framework of circuit quantum electrodynamics by advancing specific microwave engineering and characterization techniques. In particular, we explore the miniaturization of circuit footprints through the realization of compact sub-gigahertz inductor-capacitor resonators. Additionally, we contribute to the optimization of unconditional qubit reset using a single-junction quantum-circuit refrigerator, and to the advanced characterization of microwave fields via computed tomography of propagating microwave photons. In summary, these results demonstrate fixed and tunable drive-line filters that suppress idle-state radiative decay while preserving selected control, reset, and thermometry operations. By replacing static coupling compromises with temporally programmable environments, these architectures offer a promising route to reducing noise, mitigating crosstalk, and accelerating error-correction cycles in future superconducting quantum processors.
Accurate control of quantum degrees of freedom is promising for sensing, communication, and computing, but building a useful quantum computer faces a central isolation-and-control challenge: qubits must remain well isolated from their environment to preserve coherence, yet also be coupled strongly enough for control, readout, and reset. Existing approaches address this challenge only partially, using separate reset elements, drive schemes, and Purcell filters, often with added complexity and tradeoffs such as heating and crosstalk. Here we introduce and demonstrate a first-generation quantum dial: a device that on demand mediates the coupling of a qubit to selected auxiliary degrees of freedom. Our implementation uses a band-stop filter between a high-coherence transmon qubit and a broadband transmission line, enabling the coupling strength to be tuned by several orders of magnitude on nanosecond timescales without significant Stark shift. In the reset configuration, we reduce the qubit energy relaxation time T1 from >150 μs to about 200 ns and demonstrate reset independent of the initial state. In the control configuration, we obtain 99.99% idle fidelity and 99.9% gate fidelities for 40 ns pulses at about -110 dBm. The same device also enables thermometry of the qubit environment, reaching a noise-equivalent temperature of 0.6 mK/Hz at 60 mK and approaching the Cramér-Rao bound at higher temperatures. The quantum dial thus offers fast, on-demand switching between isolation and strong coupling, with potential to reduce noise and errors in future quantum processors.
Abstract Achieving fast gates and long coherence times for superconducting qubits presents challenges, typically requiring either a stronger coupling of the drive line or an excessively strong microwave signal to the qubit. To address this, we introduce on-chip filters of the qubit drive exhibiting a stopband at the qubit frequency, thus enabling long coherence times and strong coupling at the subharmonic frequency, facilitating fast single-qubit gates, and reduced thermal load. The filters exhibit an extrinsic relaxation time of a few seconds while enabling sub-10-ns gates with subharmonic control. Here we show up to 200-fold improvement in the measured relaxation time at the stopband. Furthermore, we implement subharmonic driving of Rabi oscillations with a π pulse duration of 12 ns. Our demonstration of on-chip filters and efficient subharmonic driving in a two-dimensional quantum processor paves the way for a scalable qubit architecture with reduced thermal load and noise from the control line.
Quantum error correction imposes stringent requirements on the underlying hardware: all core operations of a quantum processor – single-qubit gates, two-qubit entangling gates, qubit readout, and qubit reset – must operate well below the error thresholds of leading codes. While such thresholds have already been crossed in several platforms, the associated overhead in physical qubits and circuit depth remains extremely sensitive to the physical error rate. This thesis investigates how far a superconducting platform based on transmon qubits can be pushed toward its physical limits, and how architectural and control choices can be optimized to reduce the overhead required for fault-tolerant quantum computation. First, we develop and characterize tunable-coupler architectures that enable fast, high-fidelity controlled-Z (CZ) gates. A long-distance coupler increases the qubit-qubit separation, freeing chip area for additional on-chip components, while still achieving CZ fidelities above 99.8%. Building on this, we optimize the qubit-coupler coupling to simultaneously support high-performance single- and two-qubit gates. We achieve simultaneous single- and two-qubit gate fidelities exceeding 99.9% on the same chip using a CZ calibration experiment based on our phase-averaged leakage error amplification (PALEA) protocol. PALEA coherently amplifies small over- and under-rotations of the diabatic CZ gate, making calibration errors easier to detect and correct. Second, we address single-qubit gates. Using spectrally engineered FAST-DRAG and higherderivative DRAG pulses, we demonstrate sub-8 ns gates with errors of order 10!" and strongly suppressed leakage. Third, we address readout by combining shelving to a higher qubit level with Purcell-filtered resonators and quantum-limited amplification, achieving readout errors below 10!#. Beyond the transmon workhorse, we explore the unimon qubit, which combines large anharmonicity with reduced charge sensitivity, and investigate a quantum circuit refrigerator as an integrated resource for fast, unconditional qubit reset via engineered dissipation. Finally, we demonstrate a cryogenic microwave link between two dilution refrigerators, enabling remote state transfer and entanglement over a five-meter distance and illustrating a path toward modular and distributed superconducting quantum processors. Together, these results show that with careful co-design of device layout, coupling topology, pulse shaping, and calibration protocols, all core operations – except qubit reset – of a superconducting quantum processor can be operated in the 10!#–10!" error regime within a coherent hardware and control stack, substantially lowering the resource overhead required for future fault-tolerant architectures.
This thesis explores novel strategies for advancing superconducting quantum computing through a series of experimental investigations and device innovations. Grounded in the development of circuit quantum electrodynamics, the work addresses the challenges posed by the limitations of coherent control, coherence time and scaling of superconducting qubits. Focusing on transmon qubits, the thesis first reviews the foundational principles of circuit quantum electrodynamics and the critical role of the transmon in achieving robust qubit performance. Three experimental studies form the core of this work. The first study demonstrates a universal quantum gate set for strongly coupled transmons. By exploiting the residual ZZ interaction, the work introduces a novel two-axis gate protocol for single-qubit operations and implements both CZ and CNOT gates with high fidelities, highlighting the potential for fast, low-error quantum operations in the strong coupling regime. The second study investigates a dual-rail qubit architecture using parametrically coupled transmons, showcasing a hardware-efficient approach to quantum error correction. This experiment converts single-photon loss errors into detectable erasures and leverages mid-circuit detection to enhance qubit coherence, thereby advancing fault-tolerant quantum computing schemes in the NISQ era. The final study focuses on the development of merged-element transmons (MET) and their FinMET variants. By integrating the Josephson junction and shunt capacitor into a single trilayer device, these innovations achieve a dramatic reduction in device footprint while addressing loss channels through advanced materials engineering, ultimately paving the way for scalable, high-coherence quantum circuits. Collectively, these contributions demonstrate significant progress in quantum gate design, error mitigation, and qubit architecture, offering promising routes toward the realization of largescale, fault-tolerant quantum computers
Tunable couplings are a central requirement for scalable quantum processing with superconducting quantum circuits. Practical quantum processors must dynamically reconfigure their interaction landscape to accommodate different quantum operations, including idle, single-qubit gates, two-qubit gates, readout, and reset, while maintaining high coherence and suppressing spurious couplings. While widely used tunable interaction approaches rely on single-mode mediation, they are often constrained by nearest-neighbor connectivity, limited on-off ratios, and stringent requirements on qubit frequency allocation. This thesis develops and studies novel strategies for tailoring tunable interactions by moving beyond single-mode mediation, spanning multimode engineered interactions and modeless interaction schemes ("many to no modes"), while accounting for realistic constraints in superconducting hardware. Using a microwave metamaterial waveguide realized by coupled resonator arrays, I demonstrate tunable dissipative interactions that allow on-demand, fast, and high switching-ratio photon emission from a transmon used as a multi-level quantum emitter. This capability is leveraged to achieve deterministic generation of multidimensional photonic cluster states, as well as unconditional reset and leakage reduction of frequency-tunable superconducting qubits. Complementary to these multimode dissipative tunable interactions, this thesis also introduces architectures that realize tunable interactions mediated by many coherent modes or by no mediating modes. I discuss a long-range interaction scheme between superconducting dual-rail qubits mediated by spatially extended eigenmodes of a coupled-resonator array bus. Finally, I propose and analyze a novel modeless coupling architecture based on a SQUID coupler which provides intrinsic cross-Kerr interactions, enabling fast, hybridization-free CZ gates for far-detuned pairs, and discuss its implications for miniaturization of superconducting quantum processors.
Quantum information processing holds the promise of a paradigm shift in computational power for specific problem classes. While contemporary quantum processors operate in the Noisy Intermediate-Scale Quantum (NISQ) regime and remain highly susceptible to errors, ongoing experimental efforts on these near-term devices are crucial for advancing the underlying technology. Among the various hardware implementations, superconducting quantum circuits stand out as one of the most robust architectures for scalable quantum technologies. Nevertheless, the primary bottleneck in these systems is the fragility of quantum information: interactions with the environment inevitably perturb the quantum states, a phenomenon known as decoherence. This rapid loss of stored information imposes a fundamental limit on the time available to reliably execute computations on these devices. Within this context, this thesis focuses on the comprehensive experimental characterization of a planar chip featuring isolated, fixed-frequency superconducting transmon qubits. The measurements were conducted in a cryogenic environment, relying on a dilution refrigerator to maintain the device at millikelvin temperatures. To probe the quantum system under these conditions, custom measurement scripts were developed to operate state-of-the-art microwave control electronics (Keysight Quantum Control System), establishing full control over pulse generation, signal acquisition, and digital demodulation. The experimental workflow systematically mapped the physical properties of the device through a progressive series of characterization steps. Initial spectroscopic techniques probed the coupled resonator-qubit system, identifying its fundamental transition frequencies and relevant energy scales. Building upon these frequency-domain measurements, coherent control was achieved by calibrating resonant microwave pulses to drive single-qubit rotations, enabling the reliable preparation of the qubit in excited or coherent superposition states. Finally, specific time-domain protocols were implemented to evaluate the operational limits of the device. By executing standard pulse sequences, the characteristic decoherence metrics of the system, namely the longitudinal energy relaxation time (T1) and the inhomogeneous dephasing time (T2*), were successfully extracted, providing a quantitative assessment of the qubit's overall performance and establishing a baseline for future implementations of more advanced quantum control protocols.