Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Experimental characterization of superconducting transmon qubits

MOSE' GUERINI

Published Apr 15, 2026• 0 citations
OpenAlex

Abstract

Quantum information processing holds the promise of a paradigm shift in computational power for specific problem classes. While contemporary quantum processors operate in the Noisy Intermediate-Scale Quantum (NISQ) regime and remain highly susceptible to errors, ongoing experimental efforts on these near-term devices are crucial for advancing the underlying technology. Among the various hardware implementations, superconducting quantum circuits stand out as one of the most robust architectures for scalable quantum technologies. Nevertheless, the primary bottleneck in these systems is the fragility of quantum information: interactions with the environment inevitably perturb the quantum states, a phenomenon known as decoherence. This rapid loss of stored information imposes a fundamental limit on the time available to reliably execute computations on these devices. Within this context, this thesis focuses on the comprehensive experimental characterization of a planar chip featuring isolated, fixed-frequency superconducting transmon qubits. The measurements were conducted in a cryogenic environment, relying on a dilution refrigerator to maintain the device at millikelvin temperatures. To probe the quantum system under these conditions, custom measurement scripts were developed to operate state-of-the-art microwave control electronics (Keysight Quantum Control System), establishing full control over pulse generation, signal acquisition, and digital demodulation. The experimental workflow systematically mapped the physical properties of the device through a progressive series of characterization steps. Initial spectroscopic techniques probed the coupled resonator-qubit system, identifying its fundamental transition frequencies and relevant energy scales. Building upon these frequency-domain measurements, coherent control was achieved by calibrating resonant microwave pulses to drive single-qubit rotations, enabling the reliable preparation of the qubit in excited or coherent superposition states. Finally, specific time-domain protocols were implemented to evaluate the operational limits of the device. By executing standard pulse sequences, the characteristic decoherence metrics of the system, namely the longitudinal energy relaxation time (T1) and the inhomogeneous dephasing time (T2*), were successfully extracted, providing a quantitative assessment of the qubit's overall performance and establishing a baseline for future implementations of more advanced quantum control protocols.

Related papers

Experiments on multi-level superconducting qubits and coaxial circuit QED

Michael Peterer

Superconducting qubits are a promising technology for building a scalable quantum computer. An important architecture employed in the field is called Circuit Quantum Electrodynamics (circuit QED), where such qubits are combined with high quality microwave cavities to study the interaction between artificial atoms and single microwave photons. The ultra-strong coupling achieved in these systems allows for control and readout of the quantum state of qubits to perform quantum information processing. The work on circuit QED performed in this thesis consisted of realizing an experimental setup for qubit experiments in a new laboratory, investigating the coherence and decay of higher energy levels of superconducting transmon qubits and finally demonstrating a novel coaxial form of circuit QED. Designing and building a 3D circuit QED setup involved the following main accomplishments: producing high quality 3D cavities; designing and installing the cryogenic microwave setup as well as the room temperature amplification and data acquisition circuitry; successfully developing a recipe for the fabrication of Josephson junctions; controlling and measuring superconducting 3D transmon qubits at 10mK. Several qubits were fully characterised and have shown coherence times of several microseconds and relaxation times up to 25μs. Superconducting qubits in fact possess higher energy levels that can provide significant computational advantages in quantum information applications. In experiments performed at MIT, preparation and control of the five lowest states of a transmon qubit was demonstrated, followed by an investigation of the phase coherence and decay dynamics of these higher energy levels. The decay was found to proceed mainly sequentially with relaxation times in excess of 20μs for all transitions. A direct measurement of the charge dispersion of these levels was performed to explore their characteristics of dephasing. This experiment was also reproduced on a 3D transmon fabricated and measured in Oxford, where due to a higher effective qubit temperature a multi-level decay model including thermal excitations was developed to explain the observed relaxation dynamics. Finally, a coaxial transmon, which we name the coaxmon, is presented and measured with a coaxial LC readout resonator and input/output coupling ports placed inline along the third dimension. This novel coaxial circuit QED architecture holds great promise for developing a scalable planar grid of qubits to build a quantum computer.

•Jan 1, 2016•1 citation

From Macroscopic Quantum Tunneling to Circuit QED: Coherence and Dissipation in 3D Transmon Qubits

Gustavo Moreto, Diego Molina, Saulo Gabriel Pereira Nascimento Alberton +9 more

Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an $$Al/AlO_x/Al$$ transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of $$\omega _{01}=5.0122~\textrm{GHz}$$ and an anharmonicity of $$\alpha /2\pi =-202.4~\textrm{MHz}$$ , corresponding to $$E_J/E_C \approx 82.9$$ . Flux spectroscopy yields a cavity-qubit coupling strength of $$g/2\pi = 260~\textrm{MHz}$$ , while the cavity linewidth gives a loaded quality factor of $$Q_L=6127$$ and a Purcell limit of $$T_1^{\textrm{Purcell}}\approx 82~\mu \textrm{s}$$ . Time-domain measurements yield coherence times of $$T_1 = 17.4~\mu \textrm{s}$$ and $$T_2^* = 5.8~\mu \textrm{s}$$ . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.

Brazilian Journal of Physics•Oct 23, 2026•1 citation

Investigating the Individual Performances of Coupled Superconducting Transmon Qubits

Halima Giovanna Ahmad, Caleb Jordan, Roald van den Boogaart +12 more

The strong requirement for high-performing quantum computing led to intensive research on novel quantum platforms in the last decades. The circuital nature of Josephson-based quantum superconducting systems powerfully supports massive circuital freedom, which allowed for the implementation of a wide range of qubit designs, and an easy interface with the quantum processing unit. However, this unavoidably introduces a coupling with the environment, and thus to extra decoherence sources. Moreover, at the time of writing, control and readout protocols mainly use analogue microwave electronics, which limit the otherwise reasonable scalability in superconducting quantum circuits. Within the future perspective to improve scalability by integrating novel control energy-efficient superconducting electronics at the quantum stage in a multi-chip module, we report on an all-microwave characterization of a planar two-transmon qubits device, which involves state-of-the-art control pulses optimization. We demonstrate that the single-qubit average gate fidelity is mainly limited by the gate pulse duration and the quality of the optimization, and thus does not preclude the integration in novel hybrid quantum-classical superconducting devices.

Condensed Matter•Mar 21, 2023•7 citations

Control for Programmable Superconducting Quantum Systems

Michiel Adriaan Rol

The discovery of quantum mechanics in the 20th century forms the basis of many of the technologies that define our lives today. The ability to engineer and manipulate individual quantum systems -- even create artificial atoms -- promises a similar revolutionary leap in technology. A quantum technology of particular interest is quantum computing, which has the potential to solve problems that are intractable for classical computers, opening up new domains of computation. Meanwhile, an attractive approach to creating engineered quantum systems is circuit quantum electrodynamics (cQED). Where research initially focused on understanding the physics of cQED devices, focus has shifted to building systems capable of performing useful computations. However, this remains extremely challenging, in part due to the inherently fragile nature of the individual quantum bits, but also due to difficulties in controlling and scaling up these systems. This thesis focuses on the control aspects of building an extensible full-stack quantum computer based on superconducting transmon qubits. We define the demonstration of quantum fault-tolerance as our target application to give focus to our efforts. The QuSurf architecture for a full-stack quantum computer presented in this thesis is designed with this application in mind. We provide a detailed study of the error sources present in this system and give an overview of the relevant characterization techniques. In the second part of this thesis, we address several key challenges in the control of a quantum computer. To realize high-fidelity coherence limited gates, we present a novel tuneup protocol that achieves a tenfold speedup over the state-of-the-art. This is realized by eliminating the need for qubit initialization. We demonstrate this protocol by calibrating single-qubit gates to a coherence limited Clifford fidelity of 99.9% in one minute. Performing repeated parity checks, as is required for quantum error correction, requires reusing qubits quickly after they have been measured. By introducing a numerically optimized depletion pulse we are able to speeds up the depletion of measurement photons in a readout resonator without having to rely on specific symmetry conditions. Using this technique speed up photon depletion by more than six inverse resonator linewidths, reducing the error rate in an emulated ancilla parity check by a factor 75. Flux-pulsing based two-qubit gates are the fastest two-qubit gates. However, they are also very technically demanding. The key challenge in performing these gates is addressing the distortions that control signals experience as they traverse various electrical components. We have developed Cryoscope (short for cryogenic oscilloscope) to characterize and correct these distortions. Cryoscope is an in-situ technique that uses the qubit to sample control pulses of arbitrary shape. Even when correcting distortions to within $\\sim 0.1\\%$ two-qubit gates are history-dependent due to the long timescale upon which some of these distortions act. We have invented Net-Zero, a new type of flux-pulsing based two-qubit gate, to address this problem. It makes use of a symmetry condition of the transmon to have net-zero integral, making the gate resilient to long-timescale distortions. The gate suppresses leakage out of the computational subspace to 0.1% by making use of leakage interference and has a built-in echo effect that enhances the coherence of the gate, achieving a two-qubit gate fidelity of 99.1%. Custom software is required to perform the physics experiments needed to build and operate a quantum computer. PycQED is an open-source software framework we have developed for this purpose. We discuss the design choices and concepts of PycQED before turning our focus to characterization and calibration. Here we introduced dependency graphs as a useful abstraction and system emulation as an essential development tool for automating the characterization and calibration process. We conclude the thesis by reflecting on the limitations of our architecture and providing an outlook on the grand challenges of building a useful kilo-qubit sized quantum computer. We define these challenges as The Application Problem, The Fabrication Problem, and The Calibration Problem.

•Sep 23, 2020•3 citations

Circuit Quantum Electrodynamics with Flux Qubits

Jean-Luc Orgiazzi

This thesis presents circuit quantum electrodynamic (cQED) experiments done with artificial atoms coupled to a high quality factor superconducting microwave resonator. This work discusses the theoretical framework, design, fabrication, implementation and characterization of a multi-qubit system using superconducting persistent current qubits, often referred as flux qubits. \n \nWe developed a new type of cryogenic aid for fast turnaround microwave experiments. The minimum turnaround time to perform microwave experiments in dilution refrigerators is typically a few days, as required by cooling down and warming up the entire refrigerator. The cryogenic microwave payload and wiring needed for each qubit and resonator add a significant heat load to \nthe system which typically only has a few µW s of cooling power at millikelvin temperatures. We present a new experimental approach we developed in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is reduced to 8 hours if the target temperature is 80 mK. This new measurement method increased our ability to successfully identify good devices with fast design-characterization iterations, while allowing months-long measurements at 30 mK. \n \nOur device architecture uses several qubits, each of which is controlled via on-chip fast flux bias lines. Readout of the qubit’s quantum state is performed by homodyne detection of the resonator field at large driving power. We observe long coherence times at the optimal bias point of the flux qubits and present decoherence measurements around this optimal point, where the \nflux qubits couple mostly to magnetic flux noise. Dynamical decoupling techniques employing fast microwave pulses are used to protect the qubit’s coherence and allow calculating the magnetic flux noise power spectral density of the qubit’s environment. Photon-mediated interaction between distant qubits in the resonator allows the implementation of a two-qubit controlled-NOT gate \nusing the selective darkening technique. \n \nThis multi-qubit superconducting design is an interesting platform to study the decoherence properties of flux qubits, the properties of strong interaction of electromagnetic radiation with macroscopic quantum systems. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.

•Sep 23, 2019•0 citations

Probing Quantum Entanglement in Superconducting Circuits at Ultra-Low Temperatures

K. V. Chawale

Quantum entanglement is a cornerstone of quantum information science, enabling advancements in quantum computing, cryptography, and metrology. We report a comprehensive experimental study of quantum entanglement in a superconducting circuit comprising two transmon qubits coupled via a tunable bus resonator, operating at ultra-low temperatures (10 mK) in a dilution refrigerator. Using precise microwave control, we generate Bell states with a fidelity of 0.94 ± 0.02 and a concurrence of 0.92 ± 0.03, confirming robust entanglement. Quantum state tomography and coherence measurements yield energy relaxation (T1) times of 92 ± 5 µs and 88 ± 4 µs, and dephasing (T2) times of 85 ± 6 µs and 82 ± 5 µs for qubits Q1 and Q2, respectively, at 10 mK. We systematically investigate the impact of temperature (10 mK, 50 mK, 100 mK) and environmental noise on entanglement persistence. Real-time analysis of recent literature and social media discussions highlights ongoing challenges in scaling superconducting qubit systems due to 1/f noise and material limitations. Our findings demonstrate the viability of superconducting circuits for high-fidelity quantum operations and provide critical insights into optimizing coherence at millikelvin temperatures.

International Journal for Research in Applied Science and Engineering Technology•Jun 30, 2025•0 citations
Quantum information processing holds the promise of a paradigm shift in computational power for specific problem classes. While contemporary quantum processors operate in the Noisy Intermediate-Scale Quantum (NISQ) regime and remain highly susceptible to errors, ongoing experimental efforts on these near-term devices are crucial for advancing the underlying technology. Among the various hardware implementations, superconducting quantum circuits stand out as one of the most robust architectures for scalable quantum technologies. Nevertheless, the primary bottleneck in these systems is the fragility of quantum information: interactions with the environment inevitably perturb the quantum states, a phenomenon known as decoherence. This rapid loss of stored information imposes a fundamental limit on the time available to reliably execute computations on these devices. Within this context, this thesis focuses on the comprehensive experimental characterization of a planar chip featuring isolated, fixed-frequency superconducting transmon qubits. The measurements were conducted in a cryogenic environment, relying on a dilution refrigerator to maintain the device at millikelvin temperatures. To probe the quantum system under these conditions, custom measurement scripts were developed to operate state-of-the-art microwave control electronics (Keysight Quantum Control System), establishing full control over pulse generation, signal acquisition, and digital demodulation. The experimental workflow systematically mapped the physical properties of the device through a progressive series of characterization steps. Initial spectroscopic techniques probed the coupled resonator-qubit system, identifying its fundamental transition frequencies and relevant energy scales. Building upon these frequency-domain measurements, coherent control was achieved by calibrating resonant microwave pulses to drive single-qubit rotations, enabling the reliable preparation of the qubit in excited or coherent superposition states. Finally, specific time-domain protocols were implemented to evaluate the operational limits of the device. By executing standard pulse sequences, the characteristic decoherence metrics of the system, namely the longitudinal energy relaxation time (T1) and the inhomogeneous dephasing time (T2*), were successfully extracted, providing a quantitative assessment of the qubit's overall performance and establishing a baseline for future implementations of more advanced quantum control protocols.
Superconducting qubits are a promising technology for building a scalable quantum computer. An important architecture employed in the field is called Circuit Quantum Electrodynamics (circuit QED), where such qubits are combined with high quality microwave cavities to study the interaction between artificial atoms and single microwave photons. The ultra-strong coupling achieved in these systems allows for control and readout of the quantum state of qubits to perform quantum information processing. The work on circuit QED performed in this thesis consisted of realizing an experimental setup for qubit experiments in a new laboratory, investigating the coherence and decay of higher energy levels of superconducting transmon qubits and finally demonstrating a novel coaxial form of circuit QED. Designing and building a 3D circuit QED setup involved the following main accomplishments: producing high quality 3D cavities; designing and installing the cryogenic microwave setup as well as the room temperature amplification and data acquisition circuitry; successfully developing a recipe for the fabrication of Josephson junctions; controlling and measuring superconducting 3D transmon qubits at 10mK. Several qubits were fully characterised and have shown coherence times of several microseconds and relaxation times up to 25μs. Superconducting qubits in fact possess higher energy levels that can provide significant computational advantages in quantum information applications. In experiments performed at MIT, preparation and control of the five lowest states of a transmon qubit was demonstrated, followed by an investigation of the phase coherence and decay dynamics of these higher energy levels. The decay was found to proceed mainly sequentially with relaxation times in excess of 20μs for all transitions. A direct measurement of the charge dispersion of these levels was performed to explore their characteristics of dephasing. This experiment was also reproduced on a 3D transmon fabricated and measured in Oxford, where due to a higher effective qubit temperature a multi-level decay model including thermal excitations was developed to explain the observed relaxation dynamics. Finally, a coaxial transmon, which we name the coaxmon, is presented and measured with a coaxial LC readout resonator and input/output coupling ports placed inline along the third dimension. This novel coaxial circuit QED architecture holds great promise for developing a scalable planar grid of qubits to build a quantum computer.
Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an Al/AlOx/AlAl/AlO_x/AlAl/AlOx​/Al transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of ω01=5.0122 GHz\omega _{01}=5.0122~\textrm{GHz}ω01​=5.0122 GHz and an anharmonicity of α/2π=−202.4 MHz\alpha /2\pi =-202.4~\textrm{MHz}α/2π=−202.4 MHz , corresponding to EJ/EC≈82.9E_J/E_C \approx 82.9EJ​/EC​≈82.9 . Flux spectroscopy yields a cavity-qubit coupling strength of g/2π=260 MHzg/2\pi = 260~\textrm{MHz}g/2π=260 MHz , while the cavity linewidth gives a loaded quality factor of QL=6127Q_L=6127QL​=6127 and a Purcell limit of T1Purcell≈82 μsT_1^{\textrm{Purcell}}\approx 82~\mu \textrm{s}T1Purcell​≈82 μs . Time-domain measurements yield coherence times of T1=17.4 μsT_1 = 17.4~\mu \textrm{s}T1​=17.4 μs and T2∗=5.8 μsT_2^* = 5.8~\mu \textrm{s}T2∗​=5.8 μs . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.
The strong requirement for high-performing quantum computing led to intensive research on novel quantum platforms in the last decades. The circuital nature of Josephson-based quantum superconducting systems powerfully supports massive circuital freedom, which allowed for the implementation of a wide range of qubit designs, and an easy interface with the quantum processing unit. However, this unavoidably introduces a coupling with the environment, and thus to extra decoherence sources. Moreover, at the time of writing, control and readout protocols mainly use analogue microwave electronics, which limit the otherwise reasonable scalability in superconducting quantum circuits. Within the future perspective to improve scalability by integrating novel control energy-efficient superconducting electronics at the quantum stage in a multi-chip module, we report on an all-microwave characterization of a planar two-transmon qubits device, which involves state-of-the-art control pulses optimization. We demonstrate that the single-qubit average gate fidelity is mainly limited by the gate pulse duration and the quality of the optimization, and thus does not preclude the integration in novel hybrid quantum-classical superconducting devices.
The discovery of quantum mechanics in the 20th century forms the basis of many of the technologies that define our lives today. The ability to engineer and manipulate individual quantum systems -- even create artificial atoms -- promises a similar revolutionary leap in technology. A quantum technology of particular interest is quantum computing, which has the potential to solve problems that are intractable for classical computers, opening up new domains of computation. Meanwhile, an attractive approach to creating engineered quantum systems is circuit quantum electrodynamics (cQED). Where research initially focused on understanding the physics of cQED devices, focus has shifted to building systems capable of performing useful computations. However, this remains extremely challenging, in part due to the inherently fragile nature of the individual quantum bits, but also due to difficulties in controlling and scaling up these systems. This thesis focuses on the control aspects of building an extensible full-stack quantum computer based on superconducting transmon qubits. We define the demonstration of quantum fault-tolerance as our target application to give focus to our efforts. The QuSurf architecture for a full-stack quantum computer presented in this thesis is designed with this application in mind. We provide a detailed study of the error sources present in this system and give an overview of the relevant characterization techniques. In the second part of this thesis, we address several key challenges in the control of a quantum computer. To realize high-fidelity coherence limited gates, we present a novel tuneup protocol that achieves a tenfold speedup over the state-of-the-art. This is realized by eliminating the need for qubit initialization. We demonstrate this protocol by calibrating single-qubit gates to a coherence limited Clifford fidelity of 99.9% in one minute. Performing repeated parity checks, as is required for quantum error correction, requires reusing qubits quickly after they have been measured. By introducing a numerically optimized depletion pulse we are able to speeds up the depletion of measurement photons in a readout resonator without having to rely on specific symmetry conditions. Using this technique speed up photon depletion by more than six inverse resonator linewidths, reducing the error rate in an emulated ancilla parity check by a factor 75. Flux-pulsing based two-qubit gates are the fastest two-qubit gates. However, they are also very technically demanding. The key challenge in performing these gates is addressing the distortions that control signals experience as they traverse various electrical components. We have developed Cryoscope (short for cryogenic oscilloscope) to characterize and correct these distortions. Cryoscope is an in-situ technique that uses the qubit to sample control pulses of arbitrary shape. Even when correcting distortions to within sim0.1\\sim 0.1\\%sim0.1 two-qubit gates are history-dependent due to the long timescale upon which some of these distortions act. We have invented Net-Zero, a new type of flux-pulsing based two-qubit gate, to address this problem. It makes use of a symmetry condition of the transmon to have net-zero integral, making the gate resilient to long-timescale distortions. The gate suppresses leakage out of the computational subspace to 0.1% by making use of leakage interference and has a built-in echo effect that enhances the coherence of the gate, achieving a two-qubit gate fidelity of 99.1%. Custom software is required to perform the physics experiments needed to build and operate a quantum computer. PycQED is an open-source software framework we have developed for this purpose. We discuss the design choices and concepts of PycQED before turning our focus to characterization and calibration. Here we introduced dependency graphs as a useful abstraction and system emulation as an essential development tool for automating the characterization and calibration process. We conclude the thesis by reflecting on the limitations of our architecture and providing an outlook on the grand challenges of building a useful kilo-qubit sized quantum computer. We define these challenges as The Application Problem, The Fabrication Problem, and The Calibration Problem.
This thesis presents circuit quantum electrodynamic (cQED) experiments done with artificial atoms coupled to a high quality factor superconducting microwave resonator. This work discusses the theoretical framework, design, fabrication, implementation and characterization of a multi-qubit system using superconducting persistent current qubits, often referred as flux qubits. \n \nWe developed a new type of cryogenic aid for fast turnaround microwave experiments. The minimum turnaround time to perform microwave experiments in dilution refrigerators is typically a few days, as required by cooling down and warming up the entire refrigerator. The cryogenic microwave payload and wiring needed for each qubit and resonator add a significant heat load to \nthe system which typically only has a few µW s of cooling power at millikelvin temperatures. We present a new experimental approach we developed in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is reduced to 8 hours if the target temperature is 80 mK. This new measurement method increased our ability to successfully identify good devices with fast design-characterization iterations, while allowing months-long measurements at 30 mK. \n \nOur device architecture uses several qubits, each of which is controlled via on-chip fast flux bias lines. Readout of the qubit’s quantum state is performed by homodyne detection of the resonator field at large driving power. We observe long coherence times at the optimal bias point of the flux qubits and present decoherence measurements around this optimal point, where the \nflux qubits couple mostly to magnetic flux noise. Dynamical decoupling techniques employing fast microwave pulses are used to protect the qubit’s coherence and allow calculating the magnetic flux noise power spectral density of the qubit’s environment. Photon-mediated interaction between distant qubits in the resonator allows the implementation of a two-qubit controlled-NOT gate \nusing the selective darkening technique. \n \nThis multi-qubit superconducting design is an interesting platform to study the decoherence properties of flux qubits, the properties of strong interaction of electromagnetic radiation with macroscopic quantum systems. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.
Quantum entanglement is a cornerstone of quantum information science, enabling advancements in quantum computing, cryptography, and metrology. We report a comprehensive experimental study of quantum entanglement in a superconducting circuit comprising two transmon qubits coupled via a tunable bus resonator, operating at ultra-low temperatures (10 mK) in a dilution refrigerator. Using precise microwave control, we generate Bell states with a fidelity of 0.94 ± 0.02 and a concurrence of 0.92 ± 0.03, confirming robust entanglement. Quantum state tomography and coherence measurements yield energy relaxation (T1) times of 92 ± 5 µs and 88 ± 4 µs, and dephasing (T2) times of 85 ± 6 µs and 82 ± 5 µs for qubits Q1 and Q2, respectively, at 10 mK. We systematically investigate the impact of temperature (10 mK, 50 mK, 100 mK) and environmental noise on entanglement persistence. Real-time analysis of recent literature and social media discussions highlights ongoing challenges in scaling superconducting qubit systems due to 1/f noise and material limitations. Our findings demonstrate the viability of superconducting circuits for high-fidelity quantum operations and provide critical insights into optimizing coherence at millikelvin temperatures.