Hardware-validated parity-preserving reversible Vedic multiplier: Clifford+T resource analysis and IBM quantum evaluation
Naga Raju Bathula, Neeraj Kumar Misra
Arithmetic units constitute fundamental components of reversible-computing architectures, where circuit complexity, resource utilization, and hardware realizability are critical design considerations. This work presents a parity-preserving reversible 2 × 2 Vedic multiplier architecture constructed using existing N1, RF, A, and N3 reversible logic blocks and hierarchically extended to realize a 4 × 4 multiplier through a parity-preserving 4-bit ripple-carry adder structure. Comparative evaluation demonstrates competitive performance relative to representative reversible multiplier architectures. To evaluate implementation-oriented characteristics, the proposed architecture was mapped to the Clifford+T gate set and analyzed using hardware-aware resource metrics. The resulting realization exhibits a T-count of 35, a T-depth of 19, and a transpiled circuit depth of 55 without requiring SWAP operations. The proposed 2 × 2 multiplier core was experimentally validated on the IBM Quantum ibm_kingston superconducting processor based on the Heron r2 architecture through complete truth-table verification across all sixteen input combinations using 1024 measurement shots per experiment. The dominant measured output matched the expected multiplication result in every case, yielding an average success probability of 70.12% and an average Bhattacharyya fidelity of 0.7012. Calibration-based fidelity estimation using backend-reported gate fidelities yielded an estimated circuit fidelity of 0.7485, which is consistent with the experimentally observed average success probability of 70.12%. Hardware-aware circuit characterization, noise-model evaluation, and fidelity analysis were performed to assess implementation behavior under practical execution conditions. In addition, application-level arithmetic demonstrations involving Low-bit-width image-processing arithmetic examples were used solely as application-level demonstrations of multiplier functionality and do not constitute a complete quantum image-processing framework. The obtained results confirm the functional correctness, hardware compatibility, and resource efficiency of the proposed architecture and provide practical insights for future reversible arithmetic and quantum-computing applications.
e-Prime – Nexus of Electrical Electronic and Intelligent Engineering•Jul 27, 2026•0 citations