superconducting microwave resonators posses higher volumes turning them to insensitive to surface dielectric losses resulting in higher đ values in comparison to 2đˇ resonators which have higher dissipation due to surface losses. Thus 3đˇ resonators increase the decoherence time. Although this makes a strong reason to opt for 3đˇ superconducting resonators while it is difficult to tune the qubit using fast magnetic field accurately from outside the 3đˇ resonator. In this paper, we try to understand transporting the magnetic filed inside a cylindrical superconducting cavity implementing a cylindrical magnetic hose using finite element analysis.
superconducting microwave resonators posses higher volumes turning them to insensitive to surface dielectric losses resulting in higher đ values in comparison to 2đˇ resonators which have higher dissipation due to surface losses. Thus 3đˇ resonators increase the decoherence time. Although this makes a strong reason to opt for 3đˇ superconducting resonators while it is difficult to tune the qubit using fast magnetic field accurately from outside the 3đˇ resonator. In this paper, we try to understand transporting the magnetic filed inside a cylindrical superconducting cavity implementing a cylindrical magnetic hose using finite element analysis.
Fast magnetic flux control is a crucial ingredient for circuit quantum electrodynamics (cQED) systems. So far, it has been a challenge to implement this technology with the high coherence 3D cQED architecture. In this paper, we control the magnetic field inside a superconducting waveguide cavity using a magnetic hose, which allows flux control of 3D transmon qubits on time scales less than 100 ns while maintaining a cavity quality factor larger than 106. The magnetic hose is designed as an effective microwave filter to not compromise the energy relaxation time of the qubit. The magnetic hose is a promising tool for fast magnetic flux control in various platforms intended for quantum information processing and quantum optics.
The surface resistance of superconductors at microwave frequencies can be as much as three orders of magnitude lower than the best normal metals such as copper, even at comparably low temperatures. This leads to resonators and filters with very low dissipation. This chapter addresses more recent developments in filter applications. Most superconducting filters are implemented with coupled resonators. Thus, the resonator is basic to both filter and resonator applications. Coupling the resonator to the external environment is an essential consideration in order to drive the circuit and measure its properties. Superconducting resonators are usually one of two types either planar, or three dimensional most often implemented as dielectric resonators. The simplest planar resonators are pieces of transmission line open or shorted at the ends one-half of the electromagnetic wavelength in length, so-called Îť/2 resonators. Dielectric resonators are three-dimensional cavities partially or fully filled with a low-loss dielectric material.
Superconducting resonators interfaced with paramagnetic spin ensembles are used to increase the sensitivity of electron spin resonance experiments and are key elements of microwave quantum memories. Certain spin systems that are promising for such quantum memories possess âsweet spotsâ at particular combinations of magnetic fields and frequencies, where spin coherence times or linewidths become particularly favorable. In order to be able to couple high-Q superconducting resonators to such specific spin transitions, it is necessary to be able to tune the resonator frequency under a constant magnetic field amplitude. Here, we demonstrate a high-quality, magnetic field resilient superconducting resonator, using a 3D vector magnet to continuously tune its resonance frequency by adjusting the orientation of the magnetic field. The resonator maintains a quality factor of >105 up to magnetic fields of 2.6 T, applied predominantly in the plane of the superconductor. We achieve a continuous tuning of up to 30 MHz by rotating the magnetic field vector, introducing a component of 5 mT perpendicular to the superconductor.
With improved understanding of loss mechanisms in superconducting resonant circuits (SRC), it is possible to design a variety of devices which take advantage of the high Q. Superconducting surface resistance, trapped-flux loss, and residual losses which are annealable can all be related to the superconductor itself. Dielectric dissipation is well enough understood to permit this source of loss to be minimized. Coupling and radiation losses can be made negligible. SRC's are described with a variety of geometries to fill the range from 10 MHz to 10 GHz. Type-I superconductors provide the highest Q's and are readily fabricated by several techniques. The superconducting resonator can be tuned accurately in frequency by temperature control of the surface reactance as well as the dielectric constant of liquid helium. An external magnetic field can be used to tune the bandwidth as well as the resonant frequency. A quarter-wave reentrant cavity is ideally suited for use as an optically tuned frequency-control element. This is accomplished using the photodielectric effect in high-resistivity semiconductor wafers which terminate the stub. Wide-bandwidth optical communication detectors are described using semiconductors with short recombination lifetime. Oscillators have been built which are optically tuned, and others which have frequency stabilities as good as commercial frequency counters. Use of SRC's to study material properties at low temperature is emphasized.
Abstract We perform an experimental and numerical study of dielectric loss in superconducting microwave resonators at low temperature. Dielectric loss, due to two-level systems, is a limiting factor in several applications, e.g. superconducting qubits, Josephson parametric amplifiers, microwave kinetic-inductance detectors, and superconducting single-photon detectors. Our devices are made of disordered NbN, which, due to magnetic-field penetration, necessitates 3D finite-element simulation of the MaxwellâLondon equations at microwave frequencies to accurately model the current density and electric field distribution. From the field distribution, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. We put emphasis on the loss caused by a spin-on-glass resist such as hydrogen silsesquioxane (HSQ), used for ultrahigh lithographic resolution relevant to the fabrication of nanowires. We find that, when used, HSQ is the dominant source of loss, with a loss tangent of δ HSQ i = 8 Ă 10 â 3 .
The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identification of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting quantum computing. Superconducting microwave resonators provide a convenient qubit proxy for assessing performance and studying TLS loss and other mechanisms relevant to superconducting circuits such as non-equilibrium quasiparticles and magnetic flux vortices. In this review article, we provide an overview of considerations for designing accurate resonator experiments to characterize loss, including applicable types of losses, cryogenic setup, device design, and methods for extracting material and interface losses, summarizing techniques that have been evolving for over two decades. Results from measurements of a wide variety of materials and processes are also summarized. Finally, we present recommendations for the reporting of loss data from superconducting microwave resonators to facilitate materials comparisons across the field.