Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

CRC Press eBooks

Microwave Resonators and Filters

Daniel E. Oates

Published May 17, 2022• 5 citations
Publisher

Abstract

The surface resistance of superconductors at microwave frequencies can be as much as three orders of magnitude lower than the best normal metals such as copper, even at comparably low temperatures. This leads to resonators and filters with very low dissipation. This chapter addresses more recent developments in filter applications. Most superconducting filters are implemented with coupled resonators. Thus, the resonator is basic to both filter and resonator applications. Coupling the resonator to the external environment is an essential consideration in order to drive the circuit and measure its properties. Superconducting resonators are usually one of two types either planar, or three dimensional most often implemented as dielectric resonators. The simplest planar resonators are pieces of transmission line open or shorted at the ends one-half of the electromagnetic wavelength in length, so-called λ/2 resonators. Dielectric resonators are three-dimensional cavities partially or fully filled with a low-loss dielectric material.

DOI
10.1201/9781003139638-44

Related papers

Performance of Superconducting Oscillators and Filters

Jack L. Stone, WILLIAM H. HARTWIG

With improved understanding of loss mechanisms in superconducting resonant circuits (SRC), it is possible to design a variety of devices which take advantage of the high Q. Superconducting surface resistance, trapped-flux loss, and residual losses which are annealable can all be related to the superconductor itself. Dielectric dissipation is well enough understood to permit this source of loss to be minimized. Coupling and radiation losses can be made negligible. SRC's are described with a variety of geometries to fill the range from 10 MHz to 10 GHz. Type-I superconductors provide the highest Q's and are readily fabricated by several techniques. The superconducting resonator can be tuned accurately in frequency by temperature control of the surface reactance as well as the dielectric constant of liquid helium. An external magnetic field can be used to tune the bandwidth as well as the resonant frequency. A quarter-wave reentrant cavity is ideally suited for use as an optically tuned frequency-control element. This is accomplished using the photodielectric effect in high-resistivity semiconductor wafers which terminate the stub. Wide-bandwidth optical communication detectors are described using semiconductors with short recombination lifetime. Oscillators have been built which are optically tuned, and others which have frequency stabilities as good as commercial frequency counters. Use of SRC's to study material properties at low temperature is emphasized.

Journal of Applied Physics•May 1, 1968•17 citations

Microwave resonators for superconducting devices

Riccardo Manenti, Mário Motta

Abstract In this chapter, we present microwave resonators, one of the two main elements composing a quantum computer based on superconducting devices. We describe planar microwave resonators and introduce their classical modeling as RLC circuits. We introduce transmission lines coupled to microwave resonators and explore the dependence of the transmission coefficient on temperature and power. We then describe how to drive a microwave resonator with an electromagnetic pulse. In the last part of the chapter, we model a microwave resonator as a quantum harmonic oscillation and discuss photon losses with a master equation

Oxford University Press eBooks•Aug 25, 2023•0 citations

Fabrication and Characterization of Superconducting Resonators

Giuseppe Cataldo, Emily M. Barrentine, Ari-David Brown +3 more

Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.

Journal of Visualized Experiments•May 21, 2016•3 citations

Superconducting Radio Frequency Resonators for Quantum Computing: A Short Review

Pashupati Dhakal

Superconducting radiofrequency (SRF) technology is being used not only in discovery science programs and basic research but also for several applications that benefit society more directly. The advantage of superconducting resonators over those made of normal-conducting metal is their ability to store electromagnetic energy with much lower dissipation. The high-quality factor and longer dissipation time provided by these superconducting resonators can deliver superior performance. Currently, the quantum processing architecture uses resonators and interconnecting circuits operating in the microwave regime with superconducting strip-line technology and low noise electronic devices for switching and communication. The performance of these devices can be enhanced by embedding them in 3D SRF cavity resonators to prolong the coherence time, which improves the utility of the device by reducing error rates and allowing more manipulations (calculations) before the quantum state decays. Here, we present a short review of current microwave technology used in quantum computers and progress towards the 3D resonators to enhance thecoherence time.

Journal of Nepal Physical Society•Dec 31, 2021•4 citations

Parasitic Losses in Nb Superconducting Resonators

J. M. Hornibrook, E.E. Mitchell, Chris Lewis +1 more

Microwave losses in niobium (Nb) superconducting resonators are investigated at milli-Kelvin temperatures and with low drive power. In addition to the well-known suppression in Q-factor that arises from coupling between the resonator and two-level defects in the dielectric substrate, we report strong dependence of the measured Q-factor and resonance line-shape on the electromagnetic environment. Methods to suppress parasitic coupling between the resonator and its environment are discussed.

Physics Procedia•Jan 1, 2012•4 citations

Low-temperature characterization of dielectric loss at microwave frequencies in aluminum oxide

Martin R. Otto

Superconducting quantum devices have gained increasing interest over the past 15 years because of their role as promising candidates for implementing a large-scale quantum computer and as ultra-sensitive detectors. Superconducting resonators are one type of superconducting device which are used in a variety of applications including quantum computing and radioastronomy. They can achieve large quality factors which are important for these applications and a variety of others. Specific examples of these applications include the readout and coupling of superconducting qubits and also microwave kinetic inductance detector arrays for sub-mm wavelength astronomical measurements. High quality factors also enable the study of very subtle features in the electromagnetic response of the resonator. This feature in turn offers provides a method to characterize loss mechanisms which affect the performance of superconducting qubits, by measuring the quality factor of a resonator. Dielectric loss is an example of such a loss mechanism, and is considered to be one of, if not \\it the \\rm major obstacle to overcome in order to construct scalable quantum technologies based on superconducting devices. This type of loss arises from the coupling of the electric field in the device to spurious degrees of freedom which arise naturally the dielectric environment of the device. The fast-growing interest in the physics and applications of superconducting resonators has renewed interest in an improving our fundamental understanding of dielectric loss. This interest involves the study of a much bigger and older question in condensed matter physics; namely, what is the microscopic physics which governs the behaviour and of an amorphous material at low-temperatures? \n \nIn this thesis, we present a systematic study of dielectric loss in amorphous aluminum oxide using superconducting microwave resonators. Measurements of the intrinsic loss tangent over a large temperature range of 40~mK to 1~K are presented and analyzed in detail. Some aspects of the data are well understood in terms of the standard tunnelling two-level system model, while others require a deeper analysis of the electrodynamics of the resonator and insights from more advanced theories. We employ a consistent approach using numerical simulations of the resonator to understand loss mechanisms arising from both an inhomogeneous electric field and multiple dielectric layers. We measure saturation effects which provide insight into coherent properties of two-level system ensembles and the mutual interaction between them. Excellent agreement with the two-level system model is found for intrinsic losses, however the strong dependence on temperature which we observe for saturation effects is not predicted in the standard form of the model. We find that this dependence can be understood in terms of the theory of spectral diffusion which is consistent with a strong mutual interaction between two-level systems contributes to broadening of their spectral linewidths.

•Apr 9, 2015•1 citation
The surface resistance of superconductors at microwave frequencies can be as much as three orders of magnitude lower than the best normal metals such as copper, even at comparably low temperatures. This leads to resonators and filters with very low dissipation. This chapter addresses more recent developments in filter applications. Most superconducting filters are implemented with coupled resonators. Thus, the resonator is basic to both filter and resonator applications. Coupling the resonator to the external environment is an essential consideration in order to drive the circuit and measure its properties. Superconducting resonators are usually one of two types either planar, or three dimensional most often implemented as dielectric resonators. The simplest planar resonators are pieces of transmission line open or shorted at the ends one-half of the electromagnetic wavelength in length, so-called λ/2 resonators. Dielectric resonators are three-dimensional cavities partially or fully filled with a low-loss dielectric material.
With improved understanding of loss mechanisms in superconducting resonant circuits (SRC), it is possible to design a variety of devices which take advantage of the high Q. Superconducting surface resistance, trapped-flux loss, and residual losses which are annealable can all be related to the superconductor itself. Dielectric dissipation is well enough understood to permit this source of loss to be minimized. Coupling and radiation losses can be made negligible. SRC's are described with a variety of geometries to fill the range from 10 MHz to 10 GHz. Type-I superconductors provide the highest Q's and are readily fabricated by several techniques. The superconducting resonator can be tuned accurately in frequency by temperature control of the surface reactance as well as the dielectric constant of liquid helium. An external magnetic field can be used to tune the bandwidth as well as the resonant frequency. A quarter-wave reentrant cavity is ideally suited for use as an optically tuned frequency-control element. This is accomplished using the photodielectric effect in high-resistivity semiconductor wafers which terminate the stub. Wide-bandwidth optical communication detectors are described using semiconductors with short recombination lifetime. Oscillators have been built which are optically tuned, and others which have frequency stabilities as good as commercial frequency counters. Use of SRC's to study material properties at low temperature is emphasized.
Abstract In this chapter, we present microwave resonators, one of the two main elements composing a quantum computer based on superconducting devices. We describe planar microwave resonators and introduce their classical modeling as RLC circuits. We introduce transmission lines coupled to microwave resonators and explore the dependence of the transmission coefficient on temperature and power. We then describe how to drive a microwave resonator with an electromagnetic pulse. In the last part of the chapter, we model a microwave resonator as a quantum harmonic oscillation and discuss photon losses with a master equation
Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.
Superconducting radiofrequency (SRF) technology is being used not only in discovery science programs and basic research but also for several applications that benefit society more directly. The advantage of superconducting resonators over those made of normal-conducting metal is their ability to store electromagnetic energy with much lower dissipation. The high-quality factor and longer dissipation time provided by these superconducting resonators can deliver superior performance. Currently, the quantum processing architecture uses resonators and interconnecting circuits operating in the microwave regime with superconducting strip-line technology and low noise electronic devices for switching and communication. The performance of these devices can be enhanced by embedding them in 3D SRF cavity resonators to prolong the coherence time, which improves the utility of the device by reducing error rates and allowing more manipulations (calculations) before the quantum state decays. Here, we present a short review of current microwave technology used in quantum computers and progress towards the 3D resonators to enhance thecoherence time.
Superconducting quantum devices have gained increasing interest over the past 15 years because of their role as promising candidates for implementing a large-scale quantum computer and as ultra-sensitive detectors. Superconducting resonators are one type of superconducting device which are used in a variety of applications including quantum computing and radioastronomy. They can achieve large quality factors which are important for these applications and a variety of others. Specific examples of these applications include the readout and coupling of superconducting qubits and also microwave kinetic inductance detector arrays for sub-mm wavelength astronomical measurements. High quality factors also enable the study of very subtle features in the electromagnetic response of the resonator. This feature in turn offers provides a method to characterize loss mechanisms which affect the performance of superconducting qubits, by measuring the quality factor of a resonator. Dielectric loss is an example of such a loss mechanism, and is considered to be one of, if not \\it the \\rm major obstacle to overcome in order to construct scalable quantum technologies based on superconducting devices. This type of loss arises from the coupling of the electric field in the device to spurious degrees of freedom which arise naturally the dielectric environment of the device. The fast-growing interest in the physics and applications of superconducting resonators has renewed interest in an improving our fundamental understanding of dielectric loss. This interest involves the study of a much bigger and older question in condensed matter physics; namely, what is the microscopic physics which governs the behaviour and of an amorphous material at low-temperatures? \n \nIn this thesis, we present a systematic study of dielectric loss in amorphous aluminum oxide using superconducting microwave resonators. Measurements of the intrinsic loss tangent over a large temperature range of 40~mK to 1~K are presented and analyzed in detail. Some aspects of the data are well understood in terms of the standard tunnelling two-level system model, while others require a deeper analysis of the electrodynamics of the resonator and insights from more advanced theories. We employ a consistent approach using numerical simulations of the resonator to understand loss mechanisms arising from both an inhomogeneous electric field and multiple dielectric layers. We measure saturation effects which provide insight into coherent properties of two-level system ensembles and the mutual interaction between them. Excellent agreement with the two-level system model is found for intrinsic losses, however the strong dependence on temperature which we observe for saturation effects is not predicted in the standard form of the model. We find that this dependence can be understood in terms of the theory of spectral diffusion which is consistent with a strong mutual interaction between two-level systems contributes to broadening of their spectral linewidths.