Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.
Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.
The detection of objects under large background conditions is a problem of fundamental interest in sensing. In this talk we theoretically analyze a prototype target detection protocol, the quantum time correlated (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a total probe photon transmission estimation problem. We carry out experiments using a semiconductor waveguide source. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol is able to achieve comparable to the classical protocol target detection performance but with 10–100 fold lower required time on target detection in terms of ROC curve metric. The performance of the QTC detection experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, unlike classical target detection and ranging protocol, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.
Modern optical sensing systems, particularly LiDAR, play a central role in remote sensing and precision measurement. However, they face fundamental limits when operating in noisy and highly lossy environments. Quantum illumination has emerged as a promising approach to overcome these challenges by exploiting quantum correlations. This work presents the system design and performance analysis of a quantum illumination based LiDAR architecture operating at optical frequencies. The proposed system exploits entangled photon pairs generated through spontaneous parametric down conversion to enhance detection sensitivity and robustness under weak return conditions. A complete hardware oriented framework is developed, including the entanglement source, nonlinear crystal configuration, pump laser requirements, optical propagation path, quantum memory implementation, and a detection architecture based on quantum erasure Hong-Ou-Mandel interference. Practical realization using superconducting nanowire single photon detectors is discussed to enable high efficiency and low noise photon measurement. In addition, a system level link budget and noise analysis evaluates the impact of optical losses, atmospheric attenuation, turbulence, and detector imperfections on overall performance. The study highlights how quantum correlations can improve signal to noise performance compared with classical illumination strategies, particularly in low reflectivity and high background scenarios. The presented architecture provides a realistic framework for implementing quantum LiDAR systems and supports the development of next generation long range sensing technologies.
Single-photon light detection and ranging (LiDAR) is a key technology for depth imaging through complex environments. Despite recent advances, an open challenge is the ability to isolate the LiDAR signal from other spurious sources including background light and jamming signals. Here we show that a time-resolved coincidence scheme can address these challenges by exploiting spatiotemporal correlations between entangled photon pairs. We demonstrate that a photon-pair-based LiDAR can distill desired depth information in the presence of both synchronous and asynchronous spurious signals without prior knowledge of the scene and the target object. This result enables the development of robust and secure quantum LiDAR systems and paves the way to time-resolved quantum imaging applications.
Light Detection and Ranging (LiDAR) has emerged as a pivotal sensor across diverse domains such as autonomous driving, mapping, and remote sensing, owing to its exceptional orientation capabilities and high resolution. The detection mechanism of LiDAR is fundamentally categorized into non-coherent detection and coherent detection. Non-coherent detection employs the direct detection method, which involves measuring changes in the intensity of the reflected light signal to achieve detection. Pulse LiDAR, which determines the target range through pulsed time-of-flight measurements, falls within this classification. On the other hand, coherent detection employs heterodyne detection techniques and achieves detection by measuring the frequency or phase difference between the echo signal and the local oscillator signal. This approach is utilized in frequency modulation continuous wave (FMCW) LiDAR and Doppler speed LiDAR. LiDAR systems employing coherent detection methods can attain heightened sensitivity while operating at lower transmission power levels. However, due to the limitations posed by quantum noise, conventional LiDAR systems have encountered challenges in terms of detection sensitivity and resolution, prompting the need for advancement. In recent times, spurred by the emergence of quantum metrology, a quantum version of LiDAR has been conceptualized, promising superior precision and resolution. Leveraging the enhanced signal-to-noise ratio made possible by quantum advancements, quantum LiDAR demonstrates the potential to extend detection ranges, elevate detection accuracy, bolster anti-jamming capabilities, and enhance anti-stealth performance beyond that of classical LiDAR, all while operating at equivalent transmission signal power levels. As an emerging technology, quantum LiDAR is currently in its exploratory phase, and several challenges must be confronted prior to its practical implementation. These challenges encompass a restricted array of methods for the effective generation of quantum light sources, the vulnerability of quantum states to environmental factors, resulting in their deterioration, the constrained techniques for modulating quantum light sources, and the critical necessity to augment detector sensitivity. Furthermore, present quantum LiDAR efforts primarily concentrate on imaging and ranging capabilities, with limited research dedicated to simultaneous velocity measurement and ranging. Hence, forthcoming investigations into quantum LiDAR will center around optimizing quantum light source efficiency, exploring high-dimensional modulation techniques, and advancing high-sensitivity detectors. These efforts aim to enhance system stability and enable miniaturization, ultimately leading to superior target detection performance. This review centers on the evaluation of ranging and velocity measurement performance within quantum LiDAR systems. Following a concise introduction to two renowned categories of classical LiDAR—namely, pulse LiDAR and FMCW LiDAR, the paper delves into the progress made in quantum pulsed LiDAR and quantum interferometric LiDAR. In particular, this review highlights the advancements in quantum FMCW LiDAR, a system proposed for achieving simultaneous range and velocity measurements with quantum enhancement. By conducting a thorough assessment of the current accomplishments in quantum LiDAR research, the study seeks to attain a more profound comprehension of prevailing research focal points and obstacles, thus offering invaluable insights to steer its prospective advancement.
The goal of optical target detection is to identify the presence or absence of a target object by using light or photons as the transmitter. This technique offers significant advantages, such as high resolution and precise directionality, and plays a key role in applications like LiDAR. One of the critical performance metrics in optical target detection is noise resilience─specifically, the system’s ability to distinguish reflected signals from crosstalk or jamming sources with similar optical properties. Traditionally, this challenge has been addressed through classical information processing or standard optical filtering methods. However, a new approach to improving noise resilience has recently captured the attention of numerous researchers: harnessing the unique properties of quantum light sources. These sources offer performance enhancements that are challenging or even impossible to achieve with conventional coherent optical sources. In this perspective, we examine the performance and limitations of this emerging method, including challenges related to receiver complexity and power scaling. We also explore potential strategies to overcome these limitations, highlighting the practical advantages these approaches could offer.
Single-photon light detection and ranging (LiDAR) is a key technology for depth imaging through complex environments. Despite recent advances, an open challenge is the ability to isolate the LiDAR signal from other spurious sources including background light and jamming signals. Here we show that a time-resolved coincidence scheme can address these challenges by exploiting spatio-temporal correlations between entangled photon pairs. We demonstrate that a photon-pair-based LiDAR can distill desired depth information in the presence of both synchronous and asynchronous spurious signals without prior knowledge of the scene and the target object. This result enables the development of robust and secure quantum LiDAR systems and paves the way to time-resolved quantum imaging applications.