This article presents a comprehensive analysis of two classes of quantum radars, including quantum direct-detection and quantum-entangled noise radars. In the first case, inspired by the well-established concept of single-photon LiDARs, we investigated the performance of single-photon radars, in which state-of-the-art single microwave-photon detectors are employed to enhance the detection sensitivity and enable the detection of weaker signals. We derived analytical expressions for the maximum detection range of both classes of quantum radars in terms of the Lambert W function, by considering all relevant system, target, and environmental parameters. Our formulation facilitates direct comparison of noise radars with direct-detection radars and suggests that a quantum-entangled noise radar can be regarded as an enhanced direct-detection radar with an effective threshold signal-to-noise ratio. Furthermore, we applied this framework to classical-correlated noise radars and defined the parameter range enhancement factor (REF) to quantify the superiority of quantum-entangled noise radars over their classical counterparts. Moreover, we introduced a rule-of-thumb for approximating the REF. We also examined the influence of limitations imposed by various microwave detection technologies. Our analysis shows that the conventional antennas limit the potential benefits of quantum-entangled noise radar systems. We also demonstrated that the optimal detection method for these radars is a microwave detector based on a quantum transducer combined with a single optical-photon detector. We showed that, with the current technology, implementing a quantum-entangled noise radar with the maximum detection range on the order of few kilometers is possible. Finally, we explored the potential applications of quantum-entangled noise radars.
This article has been published in AVS Quantum Science. \c{opyright} AIP Publishing. The final published version is available at DOI: https://doi.org/10.1116/5.0316803
This article presents a comprehensive analysis of two classes of quantum radars, including quantum direct-detection and quantum-entangled noise radars. In the first case, inspired by the well-established concept of single-photon LiDARs, we investigated the performance of single-photon radars, in which state-of-the-art single microwave-photon detectors are employed to enhance the detection sensitivity and enable the detection of weaker signals. We derived analytical expressions for the maximum detection range of both classes of quantum radars in terms of the Lambert W function, by considering all relevant system, target, and environmental parameters. Our formulation facilitates direct comparison of noise radars with direct-detection radars and suggests that a quantum-entangled noise radar can be regarded as an enhanced direct-detection radar with an effective threshold signal-to-noise ratio. Furthermore, we applied this framework to classical-correlated noise radars and defined the parameter range enhancement factor (REF) to quantify the superiority of quantum-entangled noise radars over their classical counterparts. Moreover, we introduced a rule-of-thumb for approximating the REF. We also examined the influence of limitations imposed by various microwave detection technologies. Our analysis shows that the conventional antennas limit the potential benefits of quantum-entangled noise radar systems. We also demonstrated that the optimal detection method for these radars is a microwave detector based on a quantum transducer combined with a single optical-photon detector. We showed that, with the current technology, implementing a quantum-entangled noise radar with the maximum detection range on the order of few kilometers is possible. Finally, we explored the potential applications of quantum-entangled noise radars.
Quantum radar is an emerging technique, currently at the experimental stage, that promises to disrupt the well-established field of conventional radar. Recent progress shows that it is possible to generate and use entangled pairs of microwave photons for detection purposes and to obtain an advantage over a classical radar. In this work, we study the currently experimentally feasible type of quantum correlation radar. To this end, we compare different radar architectures, quantum and classical, by analyzing their detection performances by means of the receiver operating characteristic (ROC), the minimum error probability as well as the Chernoff bound. The underlying system models are based on quantum mechanical formulations as well as conventional signal theory. Where it is appropriate and necessary to facilitate our analysis, we apply the central limit theorem to establish the Gaussianity of the observable quantities. A conceptual analogy between the quantum and classic points-of-view is drawn and supported by results showing the asymptotic behavior of the ROC curves of both physical descriptions depending on the power levels of signal and noise. We come to exact and comprehensible conclusions on the current state of quantum radar in comparison to classic radar with a detailed mapping of the radar operating regime (measurement time, signal-to-noise ratio, environmental noise level, target object size and distance) in which a quantum advantage is attainable.
Quantum radars and lidars are a novel, much-discussed, and rapidly evolving field of quantum science and technology, promising remarkable advantages in such basic tasks as target detection, ranging, and recognition. Quantum radars and lidars have already moved from the realm of theoretical considerations toward experiments, green, and as is the case for lidars, toward practical applications. Here we review the underlying concepts and present the basic configurations of quantum radars and lidars based on photonic entanglement and single-photon detection. We also briefly discuss the methods of producing entangled photons, such as spontaneous parametric down conversion (SPDC), spontaneous four-wave mixing, Josephson parametric amplifiers (JPAs), and quantum antennas. We show that quantum technologies open promising avenues toward the enhancement of signal-to-noise ratio (SNR) and overcoming the Rayleigh limit in radar and lidar systems.
Quantum radar represents a promising advancement over classical radar systems by exploiting quantum mechanical phenomena such as entanglement and quantum measurement to overcome fundamental detection limitations. This paper reviews the evolution of radar technology from conventional radar frequency systems to quantum radar architectures, with emphasis on sensitivity enhancement and detection of RF-stealth targets for military defense applications. Classical radar parameters such as radar range, transmitted power and cross section are revisited and extended to their quantum analogues. The role of entangled single photon sources in improving detection performance under high noise and jamming environments is discussed. Context of microwave quantum radar is reviewed along with photonic implementations. This paper further highlights the importance of quantum measurement theory, including system-apparatus entanglement, density matrix formalism and wave function collapse in extracting information from quantum radar systems. Although significant experimental challenges remain, recent advances indicate strong potential for future development of quantum radar in next generation defense and surveillance systems.
In this paper, an explicit expression for the maximum detection range of an entangled quantum two-mode squeezed (QTMS) radar, in which a two-mode squeezed vacuum state of microwave electromagnetic fields is used, have been derived by considering both the quantum properties of the entangled microwave fields and radar parameters. By comparing this equation with that of traditional radars, we showed that one can though a QTMS radar as a traditional radar with a reduced threshold signal-to-noise ratio. By discussing the current limitations, it has been shown that the critical parameter to have both simultaneous quantum advantage and substantial radar range is increasing the bandwidth of the generated output signal in the quantum entangled source. It has been shown that by considering the current feasible system parameters, it is possible to implement a QTMS radar with maximum detection range up to the order of 2km, which is suitable for recognizing small unmanned aerial vehicles in urban distances. Moreover, based on the false alarm rate, we introduce two classes of early alarm and track QTMS radars. The present approach can be generalized to other quantum radars with different types of quantum sources like electro-opto-mechanical sources, and also may shed new light on investigating the quantum radar system toward practical applications. Finally, we have discussed the potential outlooks to improve and develop the quantum entangled radar systems to be practical from the engineering point of view.
Quantum radar is an emerging field that shows a lot of promise in providing significantly improved resolution compared to its classical radar counterpart. The key to this kind of resolution lies in the correlations created from the entanglement of the photons being used. Currently, the technology available only supports quantum radar implementation and validation in the optical regime, as opposed to the microwave regime, because microwave photons have very low energy compared to optical photons. Furthermore, there currently do not exist practical single photon detectors and generators in the microwave spectrum. Viable applications in the optical regime include deep sea target detection and high resolution detection in space. In this paper, we propose a conceptual architecture of a quantum radar which uses entangled optical photons based on Spontaneous Parametric Down Conversion (SPDC) methods. After the entangled photons are created and emerge from the crystal, the idler photon is detected very shortly thereafter. At the same time, the signal photon is sent out towards the target and upon its reflection will impinge on the detector of the radar. From these two measurements, correlation data processing is done to obtain the distance of the target away from the radar. Various simulations are then shown to display the resolution that is possible.
Quantum radar represents a major shift in sensing by leveraging quantum correlations and entanglement to detect targets beyond the line of sight in complex environments. Unlike classical radar, which suffers severe performance loss in dense urban areas due to multipath effects, clutter, and noise, quantum radar uses biphoton correlations to preserve strong detection sensitivity even under heavy interference. This chapter presents a comprehensive review of quantum radar systems, focusing on NLOS functionality. It describes key concepts such as biphoton generation through spontaneous parametric down-conversion, quantum illumination methods, and optimal detection strategies. Practical implementations using cryogenic superconducting nanowire single-photon detectors and AI-based signal processing are also discussed. The role of quantum radar in future 6G integrated sensing and communication frameworks is explored, highlighting uses in autonomous vehicle safety and smart city monitoring. Simulation studies show detection rates above 95% at a 1 km NLOS distance, with up to a tenfold SNR improvement over classical systems, while experiments demonstrate more than 20 dB of noise reduction. The chapter concludes by addressing ongoing challenges like decoherence, scalability, and standardization, and outlines a pathway toward deployable quantum radar technologies by 2030 for Industry 5.0 applications.