The detection of objects under large background conditions is a problem of fundamental interest in sensing. In this talk we theoretically analyze a prototype target detection protocol, the quantum time correlated (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a total probe photon transmission estimation problem. We carry out experiments using a semiconductor waveguide source. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol is able to achieve comparable to the classical protocol target detection performance but with 10–100 fold lower required time on target detection in terms of ROC curve metric. The performance of the QTC detection experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, unlike classical target detection and ranging protocol, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.
The detection of objects under large background conditions is a problem of fundamental interest in sensing. In this talk we theoretically analyze a prototype target detection protocol, the quantum time correlated (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a total probe photon transmission estimation problem. We carry out experiments using a semiconductor waveguide source. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol is able to achieve comparable to the classical protocol target detection performance but with 10–100 fold lower required time on target detection in terms of ROC curve metric. The performance of the QTC detection experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, unlike classical target detection and ranging protocol, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.
The detection of objects in the presence of significant background noise is a problem of fundamental interest in sensing. In this work, we theoretically analyze a prototype target detection protocol, the quantum temporal correlation (QTC) detection protocol, which is implemented in this work utilizing spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon-counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol, we also consider a classical phase-insensitive target detection protocol based on intensity detection that is practical in the optical regime. We formulated the target detection problem as a total probe photon transmission estimation problem and obtain an analytical expression of the receiver operating characteristic (ROC) curves. We carry out experiments using a semiconductor waveguide source, which we developed and previously reported. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol can achieve performance comparable to that of the classical protocol (that is practical in the optical regime) but with ≃57 times lower detection time in terms of ROC curve metric. The performance of the QTC detection protocol experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, the probe photons in the QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable as well as tunable and thus amenable to large scale integration, which is necessary for practical applications.
In this article, we demonstrate theoretically and experimentally how one can exploit correlations generated in monolithic semiconductor quantum light sources to enhance the performance of optical target detection. A prototype target detection protocol, the quantum time-correlation (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources, is discussed. The QTC protocol only requires time-resolved photon-counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol, we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a probe light transmission estimation problem, and we quantify the target detection performance with the Fisher information criterion and the receiver operation characteristic analysis. Unlike classical target detection and ranging protocols, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.
Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.
Quantum Lidar is a future technology that can mean different things to different people. To some it means detection and identification of classical-type lidar signals reflected from an illuminated target at or near the single photon level. This is facilitated by advances in semiconductor detector technology that allow highly efficient photocounting. To others it is more stringent, requiring exploitation of covertness associated with being essentially undetectable by the target in a thermal background, whilst allowing the lidar operator to filter her own signal from this noise. Again there is nothing specifically quantum about this. Any source that mimics of the energy rate per bandwidth seen by the illuminated object in the direction of the source can appear covert. In order to exploit quantum optics one can use inherent correlations, whether entangled or otherwise between light beams. Simple correlated optical beams can do this in two ways, perhaps by storing one beam as a reference and later performing correlated detection with the return signal in a phase sensitive manner. This is the “gold standard” for quantum lidar, but will be difficult outside of laboratory situations. In microscopy such phase control might be possible, or perhaps in the radio or microwave region for a quantum radar. Less challenging is a scenario in which an immediate local measurement of one beam conditions the beam sent to the target, allowing the return signal to be sifted from noise more easily. Here we will consider such a simple system, providing a range equation for a basic quantum lidar if it is to be operated covertly or openly. Open operation allows increased quantum signal brightness but also provides a quantum advantage, unspoofability – the lidar operator can in principle recognise their own return signal. We will also provide an analysis of quantum lidar detection based on quantum hypothesis testing and use this to perform Monte Carlo simulation of both target detections and false positive avoidance in a noisy background. The theory will be applied to experimental data.
In the detection process of classic radars such as radar/lidar, the detection performance will be weakened due to the presence of background noise and loss. The quantum illumination protocol can use the spatial correlation between photon pairs to improve image quality and enhance radar detection performance, even in the presence of loss and noise. Based on this quantum illumination LIDAR, a theoretic scheme is developed for the detection and tracking of moving targets, and the trajectory of the object is analyzed. Illuminated by the quantum light source as Spontaneous Parametric Down-Conversion (SPDC), an opaque target can be identified from the background in the presence of strong noise. The static objects obtained by classical and quantum illumination are compared, respectively, and the advantages of quantum illumination are verified. The moving objects are taken at appropriate intervals to obtain the images of the moving objects, then the images are visualized as dynamic images, and the three-frame difference method is used to obtain the target contour. Finally, the image is performed by a series of processing on to obtain the trajectory of the target object. Several different motion situations are analyzed separately, and compared with the set object motion trajectory, which proves the effectiveness of the scheme. This scheme has potential practical application value.
Abstract Imaging, detection and ranging of objects in the presence of significant background noise is a fundamental challenge in optical sensing. Overcoming the limitations imposed in conventional methods, quantum light sources show higher resistance against noise in a time-correlation-based quantum illumination. Here, we introduce the advantage of using not only time correlations but also polarization correlations in photon pairs in the detection of an object that is embedded in a noisy background. In this direction, a time- and polarization-correlated photon pair source using the spontaneous parametric down-conversion process is exploited. We found that the joint measurement of correlated pairs allows distinguishing the signal from the noise photons and that leads to an improved signal-to-noise ratio. Our comparative study revealed that using polarization correlations in addition to time correlations provides improved noise rejection. Furthermore, we show that polarization correlation allows undoing the detector limitation where high background often leads to detector saturation.