Assessment of SFQ digital circuits based on self-shunted SNIS Josephson junctions

Pascal Febvre, David Bouis, Natascia De Leo +3 more

Pascal Febvre

David I. Olaya, Paul D. Dresselhaus, Samuel P. Benz +5 more

Superconducting digital circuits based on Josephson junctions with amorphous niobium-silicon (a-NbSi) barriers have been designed, fabricated, and tested. Single-flux-quantum (SFQ) shift registers operated with ±30% bias margins, confirming junction reproducibility and uniformity. Static digital dividers operated up to 165 GHz for a single value of bias current, which was only marginally slower than circuits fabricated with externally shunted AlOx-barrier junctions having a comparable critical current density of 4.5 kA/cm2. In comparison, self-shunted a-NbSi junctions enabled a doubling in circuit density. This and their relatively thick 10 nm barriers could increase the yield of complex SFQ circuits.

Wakana Hironori, Seiji Adachi, Tsunehiro Hato +3 more

Pascal Febvre, Romain Collot, Natascia De Leo +4 more

An interesting feature of Superconductor Normal metal Superconductor - Josephson junctions for digital applications is due to their non-hysteretic current-voltage characteristics in a broad temperature range below Tc. This allows to design Single-Flux-Quantum (SFQ) cells without the need of external shunts. Two advantages can be drawn from this property: first the SFQ cells can be more compact which leads to a more integrated solution towards nano-devices and more complex circuits; second the absence of electrical parasitic elements associated with the wiring of resistors external to the Josephson junctions increases the performance of SFQ circuits, in particular regarding the ultimate speed of operation. For this purpose Superconductor Normal metal Insulator-Superconductor Nb/Al-AlOx/Nb Josephson junctions have been recently developed at INRiM with aluminum layer thicknesses between 30 and 100 nm. They exhibit non-hysteretic current-voltage characteristics with RnIc values higher than 0.5 mV in a broad temperature range and optimal Stewart McCumber parameters at 4.2 K for RSFQ applications. The main features of obtained SNIS junctions regarding digital applications are presented.

Yongming Zhang

By combining a long Josephson junction (LJJ) with single-flux-quantum (SFQ) circuits, new digital applications for long junctions can be explored. To fully investigate the dynamics of the hybrid LJJ/SFQ circuits, a numerical model was developed for an unshunted long junction coupled to shunted SFQ Josephson transmission line (JTL) through superconducting strips. The model is based on a one-dimensional array of Josephson junctions that is described by a set of discrete sine-Gordon equations. Simulations support our experimental observation that the first zero-field step can exist when the LJJ is terminated by SFQ elements. The influences on the first zero-field step by the self-inductance, the critical current, and the shunt resistance of JTL cells are studied in detail. Simulation also confirms that each 4/spl pi/ phase leap at the end of the long junction creates two separated SFQ pulses after several overdamped JTL cells.