Atomic clocks can be broadly classified into passive and active types according to their mode of operation. In the microwave domain, active hydrogen masers provide excellent short-term stability and are widely used as flywheel oscillators in timekeeping systems along with the cesium fountain standards. In the optical domain, passive optical clocks have achieved unprecedented accuracy and stability, but at the cost of large and complex infrastructures associated with ultrastable cavities and the preparation of atoms in optical lattices or ion traps. By contrast, active optical clocks generate coherent clock light directly from an atomic transition in the bad-cavity regime, where cavity pulling is strongly suppressed, thereby reducing sensitivity to cavity fluctuations and potentially simplifying optical clock architectures. Over the past decade, active optical clocks have developed from a conceptual proposal into a rapidly advancing field that includes pulsed superradiant systems based on cold atoms and continuous-wave bad-cavity systems based on thermal atomic vapors. This review summarizes recent progress in active optical clocks and discusses future directions of the field.
Atomic clocks can be broadly classified into passive and active types according to their mode of operation. In the microwave domain, active hydrogen masers provide excellent short-term stability and are widely used as flywheel oscillators in timekeeping systems along with the cesium fountain standards. In the optical domain, passive optical clocks have achieved unprecedented accuracy and stability, but at the cost of large and complex infrastructures associated with ultrastable cavities and the preparation of atoms in optical lattices or ion traps. By contrast, active optical clocks generate coherent clock light directly from an atomic transition in the bad-cavity regime, where cavity pulling is strongly suppressed, thereby reducing sensitivity to cavity fluctuations and potentially simplifying optical clock architectures. Over the past decade, active optical clocks have developed from a conceptual proposal into a rapidly advancing field that includes pulsed superradiant systems based on cold atoms and continuous-wave bad-cavity systems based on thermal atomic vapors. This review summarizes recent progress in active optical clocks and discusses future directions of the field.
Abstract The atomic clocks, whether operating at optical or microwave region, can be divided into two categories according to their working mode, namely the passive clocks and active clocks. The passive clocks, whose standard frequency is locked to an ultra-narrow atomic spectral line, such as laser cooled Cs beam or lattice trapped Sr atoms, depend on the spontaneous emission line. On the contrary, the active clocks, in which the atoms are used as the gain medium, are based on the stimulated emission radiation, their spectrum can be directly used as the frequency standard. Up to now, the active hydrogen maser has been the most stable microwave atomic clocks. Also, the Sr superradiant active atomic clock is prospects for a millihertz-linewidth laser. Moreover, the optical clocks are expected to surpass the performance of microwave clocks both in stability and uncertainty, since their higher working frequency. The active optical clock has the potential to improve the stability of the best clocks by 2 orders of magnitude. In this work, we introduce the development of active optical clocks, and their types is classified according to the energy-level structure of atoms for stimulated radiation.
Current state-of-the-art frequency standards are passive optical atomic clocks where the frequency of an optical resonator is stabilized to a narrow atomic transition. Passive clocks have achieved unprecedented stabilities of 6.6 x 10--19 over one hour of averaging time [1]. However, they face intrinsic limitations, particularly due to thermal and mechanical fluctuations of the local oscillator. To surpass the limitations of the passive clocks and go beyond the state-of-the-art, the idea of building active optical atomic clocks emerges. These clocks would be optical counterparts of hydrogen masers, with the emitted frequency defined by the atomic transition and therefore inherently stable against cavity instabilities. This paper discusses the latest developments and future prospects in the field of active optical atomic clocks.
Abstract Current state-of-the-art frequency standards are passive optical atomic clocks where the frequency of an optical resonator is stabilized to a narrow atomic transition. Passive clocks have achieved unprecedented stabilities of 6.6 × 10−19 over one hour of averaging time [1]. However, they face intrinsic limitations, particularly due to thermal and mechanical fluctuations of the local oscillator. To surpass the limitations of the passive clocks and go beyond the state-of-the-art, the idea of building active optical atomic clocks emerges. These clocks would be optical counterparts of hydrogen masers, with the emitted frequency defined by the atomic transition and therefore inherently stable against cavity instabilities. This paper discusses the latest developments and future prospects in the field of active optical atomic clocks.
Active optical clocks, a new class of optical atomic clocks, work through stimulated emission lasing, a unique mechanism that is distinct from laser absorption spectroscopy of conventional optical clocks. With coherent weak optical feedback from a Fabry-Perot resonator operating in the bad-cavity regime, active optical clocks sustain a lasing oscillation at an atomic transition frequency. They are used directly as quantum optical frequency standards with expected stability better by about two orders of magnitude than that of the best clocks. This review starts with a simplified account of historical developments and the limitations of critical techniques in optical atomic clocks. After an introduction of the basic mechanism underlying active optical clocks, we discuss the most recent experimental results for several configurations and experimental set-ups of active optical clocks. These include those based on a 2-level atomic beam and 3-level laser-cooled trapped-atom system, those based on a 4-level atom scheme, and the Faraday active optical clock. Moreover, following the successful lasing and preliminary results on a Faraday active optical frequency standard with Faraday atomic filter using thermal Cs cell, we describe an experimental scheme of a Faraday active optical clock with a Faraday atomic filter using magic-lattice-trapped Sr atoms at the 689-nm transition, and Faraday optical clocks operating in the good-cavity regime. We conclude with a comprehensive comparison of the different active optical clocks, prospects for active Faraday optical clocks, and potential applications of active optical clocks.
Abstract Active optical clocks take advantage of the substantial suppression of cavity pulling in the bad‐cavity lasing regime and feature the simple structure and excellent portability. In the extreme case, where the cavity mirror reflection approaches zero and cannot support any quasi‐bound modes for light waves, conventional bad‐cavity lasers become the cavityless lasing and the cavity pulling vanishes. Consequently, the laser frequency is determined entirely by the atomic transition. This work is dedicated to theoretically explore the potential application of the cavityless lasing in active optical clocks. Without loss of generality, Cs atoms with well‐established quantum control techniques are employed as the gain medium that is pumped by a 459‐nm laser. The clock laser wavelength is 1470 nm. The simulation shows that the frequency stability of the clock laser with feasible physical quantities reaches at 1 s of averaging time, one order of magnitude better than the recently demonstrated compact passive optical clocks that are built upon a two‐photon transition in a hot Rb vapor and upon the modulation transfer spectroscopy of thermal Cs atoms. Such compact cavityless lasing‐based active optical clocks have the broad application prospect in satellite navigation and communications and promise an architecture for the integrated photonic metrology.
Optical atomic clocks based on laser-cooled trapped ions and atoms have advanced rapidly over the past decade. With fractional frequency uncertainties now surpassing 10 −18 , they are some of the most precise measurement tools ever built. Yet researchers are still pursuing new avenues of research to explore the fundamental limits to their stability, accuracy, and reproducibility. In this mini-review, we provide a survey of the current state of the art by describing the fundamental principles and techniques that underpin this progress, the architectures used to realize optical clocks, and the supporting laser technologies that are essential to their operation. We also examine the progress that has been made toward a redefinition of the second in the International System of Units and the inclusion of optical clocks into the global time and frequency metrology infrastructure. Finally, we discuss emerging applications of optical clocks and look at the prospects for making their precision more readily accessible to end users.