Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AAPPS bulletin

The development of active optical clock

Jia Zhang, Tiantian Shi, Jianxiang Miao, Jingbiao Chen

Published Apr 24, 2023• 18 citations
Publisher

Abstract

Abstract The atomic clocks, whether operating at optical or microwave region, can be divided into two categories according to their working mode, namely the passive clocks and active clocks. The passive clocks, whose standard frequency is locked to an ultra-narrow atomic spectral line, such as laser cooled Cs beam or lattice trapped Sr atoms, depend on the spontaneous emission line. On the contrary, the active clocks, in which the atoms are used as the gain medium, are based on the stimulated emission radiation, their spectrum can be directly used as the frequency standard. Up to now, the active hydrogen maser has been the most stable microwave atomic clocks. Also, the Sr superradiant active atomic clock is prospects for a millihertz-linewidth laser. Moreover, the optical clocks are expected to surpass the performance of microwave clocks both in stability and uncertainty, since their higher working frequency. The active optical clock has the potential to improve the stability of the best clocks by 2 orders of magnitude. In this work, we introduce the development of active optical clocks, and their types is classified according to the energy-level structure of atoms for stimulated radiation.

DOI
10.1007/s43673-023-00079-2

Related papers

Advances in active optical clocks: Past decade developments and future outlook

Chen Wang, Shougang Zhang, Jingbiao Chen +1 more

Atomic clocks can be broadly classified into passive and active types according to their mode of operation. In the microwave domain, active hydrogen masers provide excellent short-term stability and are widely used as flywheel oscillators in timekeeping systems along with the cesium fountain standards. In the optical domain, passive optical clocks have achieved unprecedented accuracy and stability, but at the cost of large and complex infrastructures associated with ultrastable cavities and the preparation of atoms in optical lattices or ion traps. By contrast, active optical clocks generate coherent clock light directly from an atomic transition in the bad-cavity regime, where cavity pulling is strongly suppressed, thereby reducing sensitivity to cavity fluctuations and potentially simplifying optical clock architectures. Over the past decade, active optical clocks have developed from a conceptual proposal into a rapidly advancing field that includes pulsed superradiant systems based on cold atoms and continuous-wave bad-cavity systems based on thermal atomic vapors. This review summarizes recent progress in active optical clocks and discusses future directions of the field.

Quantum Review Letters•Jan 1, 2026•0 citations

Research progress on active optical clocks

Jingbiao Chen, Wei Zhang

Active optical clocks, a new class of optical atomic clocks, work through stimulated emission lasing, a unique mechanism that is distinct from laser absorption spectroscopy of conventional optical clocks. With coherent weak optical feedback from a Fabry-Perot resonator operating in the bad-cavity regime, active optical clocks sustain a lasing oscillation at an atomic transition frequency. They are used directly as quantum optical frequency standards with expected stability better by about two orders of magnitude than that of the best clocks. This review starts with a simplified account of historical developments and the limitations of critical techniques in optical atomic clocks. After an introduction of the basic mechanism underlying active optical clocks, we discuss the most recent experimental results for several configurations and experimental set-ups of active optical clocks. These include those based on a 2-level atomic beam and 3-level laser-cooled trapped-atom system, those based on a 4-level atom scheme, and the Faraday active optical clock. Moreover, following the successful lasing and preliminary results on a Faraday active optical frequency standard with Faraday atomic filter using thermal Cs cell, we describe an experimental scheme of a Faraday active optical clock with a Faraday atomic filter using magic-lattice-trapped Sr atoms at the 689-nm transition, and Faraday optical clocks operating in the good-cavity regime. We conclude with a comprehensive comparison of the different active optical clocks, prospects for active Faraday optical clocks, and potential applications of active optical clocks.

Chinese Science Bulletin (Chinese Version)•Jul 1, 2015•4 citations

Superradiant active optical atomic clocks: motivations and current challenges

Martina Matusko, Marion Delehaye

Current state-of-the-art frequency standards are passive optical atomic clocks where the frequency of an optical resonator is stabilized to a narrow atomic transition. Passive clocks have achieved unprecedented stabilities of 6.6 x 10--19 over one hour of averaging time [1]. However, they face intrinsic limitations, particularly due to thermal and mechanical fluctuations of the local oscillator. To surpass the limitations of the passive clocks and go beyond the state-of-the-art, the idea of building active optical atomic clocks emerges. These clocks would be optical counterparts of hydrogen masers, with the emitted frequency defined by the atomic transition and therefore inherently stable against cavity instabilities. This paper discusses the latest developments and future prospects in the field of active optical atomic clocks.

arXiv:2411.03760•Nov 6, 2024•0 citations

Superradiant active optical atomic clocks: motivations and current challenges

Martina Matusko, Marion Delehaye

Abstract Current state-of-the-art frequency standards are passive optical atomic clocks where the frequency of an optical resonator is stabilized to a narrow atomic transition. Passive clocks have achieved unprecedented stabilities of 6.6 × 10−19 over one hour of averaging time [1]. However, they face intrinsic limitations, particularly due to thermal and mechanical fluctuations of the local oscillator. To surpass the limitations of the passive clocks and go beyond the state-of-the-art, the idea of building active optical atomic clocks emerges. These clocks would be optical counterparts of hydrogen masers, with the emitted frequency defined by the atomic transition and therefore inherently stable against cavity instabilities. This paper discusses the latest developments and future prospects in the field of active optical atomic clocks.

Journal of Physics Conference Series•Nov 1, 2024•1 citation

Optical Atomic Clock and Laser Applications to Length and Time Metrology

Ye Jiang, Yuefeng Huang, K. Gao

In the mid-20th century, atoms were realized to be good candidates for time or frequency standards since transition energies or frequencies between two energy levels of some unperturbed atoms are more stable than those defined by the rotation of the earth or artefact-based clocks such as quartz crystal clocks. This motivated extensive research on realization and improvement of such kind of quantum-based time or frequency standards. The ultra-stable laser, referred to as a local oscillator in a clock, still drifts over time due to environmentally induced length fluctuations of the reference cavity. With the development of ion traps, ultra-narrow linewidth lasers and optical frequency combs, optical clocks based on single trapped ions as a new type of clocks have been realized in many laboratories. Ions can only stay in the trap within a certain region, which is called stability region. There is a variety of potential sources of systematic shifts associated with the clock transition in ion optical clocks.

CRC Press eBooks•Apr 29, 2021•0 citations

Optical atomic clocks and the quest for ultrastable lasers

F. Riehle

Optical atomic clocks with fractional uncertainties around and below 10−17 [1] and fractional instabilities at one second interrogation time of below 10−15 [2] have outperformed the best microwave clocks like the cesium atomic clock. In optical atomic clocks a highly stable laser is used to interrogate optical transitions in laser-cooled atoms, ions, or molecules. The increase in accuracy and stability of the optical atomic clocks results from the increased line quality factor Q= ν/Δν given by the five orders of magnitude higher frequency of optical transitions as compared to the transition relevant in the microwave domain. To utilize this potential it is furthermore necessary to realize a suitable narrow linewidth of the interrogated line. The linewidth of any optical transition is given by the different broadening mechanisms of the respective quantum transition relevant for particular interrogation process as well as by the coherence properties of the interrogating laser.

Frontiers in Optics•Jan 1, 2013•1 citation
Abstract The atomic clocks, whether operating at optical or microwave region, can be divided into two categories according to their working mode, namely the passive clocks and active clocks. The passive clocks, whose standard frequency is locked to an ultra-narrow atomic spectral line, such as laser cooled Cs beam or lattice trapped Sr atoms, depend on the spontaneous emission line. On the contrary, the active clocks, in which the atoms are used as the gain medium, are based on the stimulated emission radiation, their spectrum can be directly used as the frequency standard. Up to now, the active hydrogen maser has been the most stable microwave atomic clocks. Also, the Sr superradiant active atomic clock is prospects for a millihertz-linewidth laser. Moreover, the optical clocks are expected to surpass the performance of microwave clocks both in stability and uncertainty, since their higher working frequency. The active optical clock has the potential to improve the stability of the best clocks by 2 orders of magnitude. In this work, we introduce the development of active optical clocks, and their types is classified according to the energy-level structure of atoms for stimulated radiation.
Atomic clocks can be broadly classified into passive and active types according to their mode of operation. In the microwave domain, active hydrogen masers provide excellent short-term stability and are widely used as flywheel oscillators in timekeeping systems along with the cesium fountain standards. In the optical domain, passive optical clocks have achieved unprecedented accuracy and stability, but at the cost of large and complex infrastructures associated with ultrastable cavities and the preparation of atoms in optical lattices or ion traps. By contrast, active optical clocks generate coherent clock light directly from an atomic transition in the bad-cavity regime, where cavity pulling is strongly suppressed, thereby reducing sensitivity to cavity fluctuations and potentially simplifying optical clock architectures. Over the past decade, active optical clocks have developed from a conceptual proposal into a rapidly advancing field that includes pulsed superradiant systems based on cold atoms and continuous-wave bad-cavity systems based on thermal atomic vapors. This review summarizes recent progress in active optical clocks and discusses future directions of the field.
Active optical clocks, a new class of optical atomic clocks, work through stimulated emission lasing, a unique mechanism that is distinct from laser absorption spectroscopy of conventional optical clocks. With coherent weak optical feedback from a Fabry-Perot resonator operating in the bad-cavity regime, active optical clocks sustain a lasing oscillation at an atomic transition frequency. They are used directly as quantum optical frequency standards with expected stability better by about two orders of magnitude than that of the best clocks. This review starts with a simplified account of historical developments and the limitations of critical techniques in optical atomic clocks. After an introduction of the basic mechanism underlying active optical clocks, we discuss the most recent experimental results for several configurations and experimental set-ups of active optical clocks. These include those based on a 2-level atomic beam and 3-level laser-cooled trapped-atom system, those based on a 4-level atom scheme, and the Faraday active optical clock. Moreover, following the successful lasing and preliminary results on a Faraday active optical frequency standard with Faraday atomic filter using thermal Cs cell, we describe an experimental scheme of a Faraday active optical clock with a Faraday atomic filter using magic-lattice-trapped Sr atoms at the 689-nm transition, and Faraday optical clocks operating in the good-cavity regime. We conclude with a comprehensive comparison of the different active optical clocks, prospects for active Faraday optical clocks, and potential applications of active optical clocks.
Current state-of-the-art frequency standards are passive optical atomic clocks where the frequency of an optical resonator is stabilized to a narrow atomic transition. Passive clocks have achieved unprecedented stabilities of 6.6 x 10--19 over one hour of averaging time [1]. However, they face intrinsic limitations, particularly due to thermal and mechanical fluctuations of the local oscillator. To surpass the limitations of the passive clocks and go beyond the state-of-the-art, the idea of building active optical atomic clocks emerges. These clocks would be optical counterparts of hydrogen masers, with the emitted frequency defined by the atomic transition and therefore inherently stable against cavity instabilities. This paper discusses the latest developments and future prospects in the field of active optical atomic clocks.
Abstract Current state-of-the-art frequency standards are passive optical atomic clocks where the frequency of an optical resonator is stabilized to a narrow atomic transition. Passive clocks have achieved unprecedented stabilities of 6.6 × 10−19 over one hour of averaging time [1]. However, they face intrinsic limitations, particularly due to thermal and mechanical fluctuations of the local oscillator. To surpass the limitations of the passive clocks and go beyond the state-of-the-art, the idea of building active optical atomic clocks emerges. These clocks would be optical counterparts of hydrogen masers, with the emitted frequency defined by the atomic transition and therefore inherently stable against cavity instabilities. This paper discusses the latest developments and future prospects in the field of active optical atomic clocks.
In the mid-20th century, atoms were realized to be good candidates for time or frequency standards since transition energies or frequencies between two energy levels of some unperturbed atoms are more stable than those defined by the rotation of the earth or artefact-based clocks such as quartz crystal clocks. This motivated extensive research on realization and improvement of such kind of quantum-based time or frequency standards. The ultra-stable laser, referred to as a local oscillator in a clock, still drifts over time due to environmentally induced length fluctuations of the reference cavity. With the development of ion traps, ultra-narrow linewidth lasers and optical frequency combs, optical clocks based on single trapped ions as a new type of clocks have been realized in many laboratories. Ions can only stay in the trap within a certain region, which is called stability region. There is a variety of potential sources of systematic shifts associated with the clock transition in ion optical clocks.
Optical atomic clocks with fractional uncertainties around and below 10−17 [1] and fractional instabilities at one second interrogation time of below 10−15 [2] have outperformed the best microwave clocks like the cesium atomic clock. In optical atomic clocks a highly stable laser is used to interrogate optical transitions in laser-cooled atoms, ions, or molecules. The increase in accuracy and stability of the optical atomic clocks results from the increased line quality factor Q= ν/Δν given by the five orders of magnitude higher frequency of optical transitions as compared to the transition relevant in the microwave domain. To utilize this potential it is furthermore necessary to realize a suitable narrow linewidth of the interrogated line. The linewidth of any optical transition is given by the different broadening mechanisms of the respective quantum transition relevant for particular interrogation process as well as by the coherence properties of the interrogating laser.