Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Enhanced Performance of a Three-Level Quantum Heat Engine via Squeezed Thermal Reservoirs

Negasa Belay

Published Aug 6, 2026• 0 citations
Publisher

Abstract

Abstract We work on a comprehensive theoretical investigation of a three-level quantum heat engine operating with engineered squeezed thermal reservoirs. Unlike conventional quantum heat engines that use thermal reservoirs, we demonstrate that squeezed reservoirs can significantly enhance the engine's performance by increasing both efficiency and output power. Using a rigorous open-quantum-system approach, we derive the full Lindblad master equation for a three-level system interacting with hot and cold squeezed thermal baths. Through a detailed analysis of the steady-state thermodynamics, we obtain explicit expressions for heat currents, work output, and efficiency. Our results reveal that moderate squeezing parameters ($r \approx 0.5$) combined with optimal squeezing phase ($\phi = \pi/2$) enhance the engine efficiency by up to 40\% compared to the classical Carnot limit for the same temperature ratio. The power output shows a non-monotonic behavior with squeezing, exhibiting an optimal squeezing parameter that maximizes performance. We identify three distinct operational regimes: (i) heat engine regime, (ii) refrigerator regime, and (iii) heat pump regime, which can be tuned by adjusting the squeezing phase. The efficiency at maximum power follows a universal scaling $\eta_{MP} \approx \eta_{Carnot}/2 + \Delta\eta(r)$, where $\Delta\eta(r)$ represents the squeezing-induced enhancement. Our findings provide fundamental insights into the role of non-thermal reservoirs in quantum thermodynamics and offer practical guidelines for designing high-performance quantum heat engines using squeezed light and engineered baths.

DOI
10.21203/rs.3.rs-10604726/v1

Related papers

Entropy Production in Quantum Heat Engines with Squeezed Reservoirs

Pavol Berger, Natalia Zizka, Andrej Molnar

Squeezed thermal reservoirs have been proposed as a route to boosting the efficiency and power of quantum heat engines beyond the standard Carnot bound, since squeezing injects an effective negative entropy that can, in principle, be converted into extra work. What remains poorly quantified is the entropy-production cost that driving a working qubit against a squeezed bath actually incurs once finite-time operation and reservoir decoherence are taken into account. We simulate a quantum Otto-cycle heat engine built from a two-level working system coupled alternately to a hot reservoir at temperature 4.2 K, squeezed with squeezing parameter r ranging from 0 to 1.2, and an unsqueezed cold reservoir at 0.8 K, integrating the Lindblad master equation across 42 combinations of squeezing parameter and cycle duration between 0.05 and 2.0 (in units of the inverse qubit gap). At r = 0, mean entropy production per cycle was 0.223 k_B, consistent with standard finite-time Otto-cycle behaviour, but rose to 0.361 k_B at r = 1.2, a 62% increase, even as extractable work per cycle increased by 41%, from 0.184 to 0.259 (in units of the qubit gap). The ratio of work output to entropy production, an effective thermodynamic figure of merit, was therefore not monotonic in squeezing: it peaked at r = 0.6, where work per unit entropy produced reached 0.98, 15% above the unsqueezed value of 0.85, before declining at higher squeezing as entropy production began to outpace the marginal work gain. Power output at the maximum-power cycle duration increased with squeezing across the full range tested, from 0.31 (gap units) at r = 0 to 0.52 at r = 1.2, a 68% gain, but efficiency at maximum power fell from 0.41 to 0.33 over the same range, a trade-off traced out in detail in Table 1. A decomposition of total entropy production attributed 58-71% to hot-bath coupling across all squeezing values, with the squeezed-bath contribution alone rising from undefined at r = 0 to 34% of hot-bath entropy production at r = 1.2, while coherence generated during the unitary strokes accounted for a comparatively stable 12-18% regardless of squeezing strength. These results indicate that reservoir squeezing in quantum heat engines delivers a genuine power and work advantage but at a non-negligible and squeezing-dependent entropy cost, with an intermediate squeezing level offering the best entropy-normalized performance rather than the strongest squeezing tested, a finding directly relevant to the design of squeezed-bath quantum thermal devices operating under realistic decoherence.

•Jun 15, 2026•0 citations

Quantum Stirling heat engine with squeezed thermal reservoir

Nikolaos Papadatos

We analyze the performance of a quantum Stirling heat engine (QSHE), using a two-level system and a harmonic oscillator as the working medium, that is in contact with a squeezed thermal reservoir and a cold reservoir. First, we derive closed-form expressions for the produced work and efficiency, which strongly depend on the squeezing parameter r h. Then, we prove that the effect of squeezing heats the working medium to a higher effective temperature, which leads to better overall performance. In particular, the efficiency increases with the degree of squeezing, surpassing the standard Carnot limit when the ratio of the temperatures of the hot and cold reservoirs is small. Furthermore, we derive the analytical expressions for the efficiency at maximum work and the maximum produced work in the high and low temperature regimes, and we find that at extreme temperatures the squeezing parameter r h does not affect the performance of the QSHE. Finally, the performance of the QSHE depends on the nature of the working medium.

arXiv:2210.00250•Chinese Physics B•Mar 28, 2023•13 citations

Finite-time performance of a quantum heat engine with a squeezed thermal bath

Jianhui Wang, Jizhou He, Yongli Ma

We consider the finite-time performance of a quantum Otto engine working between a hot squeezed and a cold thermal bath at inverse temperatures ${\ensuremath{\beta}}_{h}$ and ${\ensuremath{\beta}}_{c}(>{\ensuremath{\beta}}_{h})$ with $({k}_{B}\ensuremath{\equiv}1)\ensuremath{\beta}=1/T$. We derive the analytical expressions for work, efficiency, power, and power fluctuations, in which the squeezing parameter is involved. By optimizing the power output with respect to two frequencies, we derive the efficiency at maximum power as ${\ensuremath{\eta}}_{mp}={({\ensuremath{\eta}}_{C}^{\mathrm{gen}})}^{2}/[{\ensuremath{\eta}}_{C}^{\mathrm{gen}}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C}^{\mathrm{gen}})ln(1\ensuremath{-}{\ensuremath{\eta}}_{C}^{\mathrm{gen}})]$, where the generalized Carnot efficiency ${\ensuremath{\eta}}_{C}^{\mathrm{gen}}$ in the high-temperature or small squeezing limit simplifies to an analytic function of squeezing parameter $\ensuremath{\gamma}$: ${\ensuremath{\eta}}_{C}^{\mathrm{gen}}=1\ensuremath{-}{\ensuremath{\beta}}_{h}/[{\ensuremath{\beta}}_{c}cosh(2\ensuremath{\gamma})]$. Within the context of irreversible thermodynamics, we demonstrate that the expression of efficiency at maximum power satisfies a general form derived from nonlinear steady state heat engines. We show that, the power fluctuations are considerably increased, although the engine efficiency is enhanced by squeezing.

Physical review. E•Nov 20, 2019•39 citations

Quantum efficiency bound for continuous heat engines coupled to noncanonical reservoirs

Bijay Kumar Agarwalla, Jian‐Hua Jiang, Dvira Segal

We derive an efficiency bound for continuous quantum heat engines absorbing heat from squeezed thermal reservoirs. Our approach relies on a full-counting statistics description of nonequilibrium transport and it is not limited to the framework of irreversible thermodynamics. Our result, a generalized Carnot efficiency bound, is valid beyond the small-squeezing and high-temperature limit. Our findings are embodied in a prototype three-terminal quantum photoelectric engine where a qubit converts heat absorbed from a squeezed thermal reservoir into electrical power. We demonstrate that in the quantum regime, the efficiency can be greatly amplified by squeezing. From the fluctuation relation, we further receive other operational measures in linear response, for example, the universal maximum power efficiency bound.

arXiv:1706.06206•Physical review. B./Physical review. B•Sep 15, 2017•95 citations

Thermodynamics and Fluctuations in Quantum Heat Engines under Reservoir Squeezing

Xiao Ping Yang, Dehua Liu, Jizhou He +3 more

We investigate the thermodynamics and fluctuations of a finite-time quantum Otto engine alternatively driven by a hot squeezed and a cold thermal reservoir. We show that reservoir squeezing significantly enhances the performance by increasing the thermodynamic efficiency and the power, and enables higher stability by decreasing the relative power fluctuations and speeding up the convergence of quantum efficiency to its most probable value. These results are explained by our theoretical analysis that incorporates the effect of reservoir squeezing on the irreversibility associated with quantum friction and coherence due to finite time. An experimental scheme for realizing this quantum heat engine is proposed using a single-electron spin pertaining to a trapped 40Ca$^+$ ion. We provide a general framework for reliably studying the finite-time quantum heat engine and derive important insights into the novel thermodynamic behaviors beyond the classical thermal machines.

arXiv:2209.05885•Sep 13, 2022•1 citation

Thermodynamics and fluctuations in finite-time quantum heat engines under reservoir squeezing

Yang Xiao, Dehua Liu, Jizhou He +4 more

We investigate the thermodynamics and fluctuations of a finite-time quantum Otto engine alter- natively driven by a hot-squeezed and a cold thermal reservoir. We show that reservoir squeezing significantly enhances the performance by increasing the thermodynamic efficiency and the power and enables higher stability by decreasing the relative power fluctuations and speeding up the convergence of quantum efficiency to its most probable value. We also demonstrate the counterintuitive result that the efficiency can be larger than the Otto limit in the finite-time operation. Experimental demonstration of this quantum heat engine can be available, based on a single-electron spin pertaining to a trapped $^{40}\mathrm{Ca}^{+}$ ion [D. von Lindenfels et al., Phys. Rev. Lett. 123, 080602 (2019)]. We provide a general framework for reliably studying the finite-time nanoengine in finite-time operation which accounts for quantum friction and coherence, deriving important insights into the thermodynamic behaviors beyond the classical thermal machines.

Physical Review Research•Nov 27, 2023•24 citations
Abstract We work on a comprehensive theoretical investigation of a three-level quantum heat engine operating with engineered squeezed thermal reservoirs. Unlike conventional quantum heat engines that use thermal reservoirs, we demonstrate that squeezed reservoirs can significantly enhance the engine's performance by increasing both efficiency and output power. Using a rigorous open-quantum-system approach, we derive the full Lindblad master equation for a three-level system interacting with hot and cold squeezed thermal baths. Through a detailed analysis of the steady-state thermodynamics, we obtain explicit expressions for heat currents, work output, and efficiency. Our results reveal that moderate squeezing parameters (r≈0.5r \approx 0.5r≈0.5) combined with optimal squeezing phase (ϕ=π/2\phi = \pi/2ϕ=π/2) enhance the engine efficiency by up to 40% compared to the classical Carnot limit for the same temperature ratio. The power output shows a non-monotonic behavior with squeezing, exhibiting an optimal squeezing parameter that maximizes performance. We identify three distinct operational regimes: (i) heat engine regime, (ii) refrigerator regime, and (iii) heat pump regime, which can be tuned by adjusting the squeezing phase. The efficiency at maximum power follows a universal scaling ηMP≈ηCarnot/2+Δη(r)\eta_{MP} \approx \eta_{Carnot}/2 + \Delta\eta(r)ηMP​≈ηCarnot​/2+Δη(r), where Δη(r)\Delta\eta(r)Δη(r) represents the squeezing-induced enhancement. Our findings provide fundamental insights into the role of non-thermal reservoirs in quantum thermodynamics and offer practical guidelines for designing high-performance quantum heat engines using squeezed light and engineered baths.
Squeezed thermal reservoirs have been proposed as a route to boosting the efficiency and power of quantum heat engines beyond the standard Carnot bound, since squeezing injects an effective negative entropy that can, in principle, be converted into extra work. What remains poorly quantified is the entropy-production cost that driving a working qubit against a squeezed bath actually incurs once finite-time operation and reservoir decoherence are taken into account. We simulate a quantum Otto-cycle heat engine built from a two-level working system coupled alternately to a hot reservoir at temperature 4.2 K, squeezed with squeezing parameter r ranging from 0 to 1.2, and an unsqueezed cold reservoir at 0.8 K, integrating the Lindblad master equation across 42 combinations of squeezing parameter and cycle duration between 0.05 and 2.0 (in units of the inverse qubit gap). At r = 0, mean entropy production per cycle was 0.223 k_B, consistent with standard finite-time Otto-cycle behaviour, but rose to 0.361 k_B at r = 1.2, a 62% increase, even as extractable work per cycle increased by 41%, from 0.184 to 0.259 (in units of the qubit gap). The ratio of work output to entropy production, an effective thermodynamic figure of merit, was therefore not monotonic in squeezing: it peaked at r = 0.6, where work per unit entropy produced reached 0.98, 15% above the unsqueezed value of 0.85, before declining at higher squeezing as entropy production began to outpace the marginal work gain. Power output at the maximum-power cycle duration increased with squeezing across the full range tested, from 0.31 (gap units) at r = 0 to 0.52 at r = 1.2, a 68% gain, but efficiency at maximum power fell from 0.41 to 0.33 over the same range, a trade-off traced out in detail in Table 1. A decomposition of total entropy production attributed 58-71% to hot-bath coupling across all squeezing values, with the squeezed-bath contribution alone rising from undefined at r = 0 to 34% of hot-bath entropy production at r = 1.2, while coherence generated during the unitary strokes accounted for a comparatively stable 12-18% regardless of squeezing strength. These results indicate that reservoir squeezing in quantum heat engines delivers a genuine power and work advantage but at a non-negligible and squeezing-dependent entropy cost, with an intermediate squeezing level offering the best entropy-normalized performance rather than the strongest squeezing tested, a finding directly relevant to the design of squeezed-bath quantum thermal devices operating under realistic decoherence.
We analyze the performance of a quantum Stirling heat engine (QSHE), using a two-level system and a harmonic oscillator as the working medium, that is in contact with a squeezed thermal reservoir and a cold reservoir. First, we derive closed-form expressions for the produced work and efficiency, which strongly depend on the squeezing parameter r h. Then, we prove that the effect of squeezing heats the working medium to a higher effective temperature, which leads to better overall performance. In particular, the efficiency increases with the degree of squeezing, surpassing the standard Carnot limit when the ratio of the temperatures of the hot and cold reservoirs is small. Furthermore, we derive the analytical expressions for the efficiency at maximum work and the maximum produced work in the high and low temperature regimes, and we find that at extreme temperatures the squeezing parameter r h does not affect the performance of the QSHE. Finally, the performance of the QSHE depends on the nature of the working medium.
We consider the finite-time performance of a quantum Otto engine working between a hot squeezed and a cold thermal bath at inverse temperatures ${\ensuremath{\beta}}_{h}$ and ${\ensuremath{\beta}}_{c}(>{\ensuremath{\beta}}_{h})$ with $({k}_{B}\ensuremath{\equiv}1)\ensuremath{\beta}=1/T$. We derive the analytical expressions for work, efficiency, power, and power fluctuations, in which the squeezing parameter is involved. By optimizing the power output with respect to two frequencies, we derive the efficiency at maximum power as ${\ensuremath{\eta}}_{mp}={({\ensuremath{\eta}}_{C}^{\mathrm{gen}})}^{2}/[{\ensuremath{\eta}}_{C}^{\mathrm{gen}}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C}^{\mathrm{gen}})ln(1\ensuremath{-}{\ensuremath{\eta}}_{C}^{\mathrm{gen}})]$, where the generalized Carnot efficiency ${\ensuremath{\eta}}_{C}^{\mathrm{gen}}$ in the high-temperature or small squeezing limit simplifies to an analytic function of squeezing parameter $\ensuremath{\gamma}$: ${\ensuremath{\eta}}_{C}^{\mathrm{gen}}=1\ensuremath{-}{\ensuremath{\beta}}_{h}/[{\ensuremath{\beta}}_{c}cosh(2\ensuremath{\gamma})]$. Within the context of irreversible thermodynamics, we demonstrate that the expression of efficiency at maximum power satisfies a general form derived from nonlinear steady state heat engines. We show that, the power fluctuations are considerably increased, although the engine efficiency is enhanced by squeezing.
We derive an efficiency bound for continuous quantum heat engines absorbing heat from squeezed thermal reservoirs. Our approach relies on a full-counting statistics description of nonequilibrium transport and it is not limited to the framework of irreversible thermodynamics. Our result, a generalized Carnot efficiency bound, is valid beyond the small-squeezing and high-temperature limit. Our findings are embodied in a prototype three-terminal quantum photoelectric engine where a qubit converts heat absorbed from a squeezed thermal reservoir into electrical power. We demonstrate that in the quantum regime, the efficiency can be greatly amplified by squeezing. From the fluctuation relation, we further receive other operational measures in linear response, for example, the universal maximum power efficiency bound.
We investigate the thermodynamics and fluctuations of a finite-time quantum Otto engine alternatively driven by a hot squeezed and a cold thermal reservoir. We show that reservoir squeezing significantly enhances the performance by increasing the thermodynamic efficiency and the power, and enables higher stability by decreasing the relative power fluctuations and speeding up the convergence of quantum efficiency to its most probable value. These results are explained by our theoretical analysis that incorporates the effect of reservoir squeezing on the irreversibility associated with quantum friction and coherence due to finite time. An experimental scheme for realizing this quantum heat engine is proposed using a single-electron spin pertaining to a trapped 40Ca+^++ ion. We provide a general framework for reliably studying the finite-time quantum heat engine and derive important insights into the novel thermodynamic behaviors beyond the classical thermal machines.
We investigate the thermodynamics and fluctuations of a finite-time quantum Otto engine alter- natively driven by a hot-squeezed and a cold thermal reservoir. We show that reservoir squeezing significantly enhances the performance by increasing the thermodynamic efficiency and the power and enables higher stability by decreasing the relative power fluctuations and speeding up the convergence of quantum efficiency to its most probable value. We also demonstrate the counterintuitive result that the efficiency can be larger than the Otto limit in the finite-time operation. Experimental demonstration of this quantum heat engine can be available, based on a single-electron spin pertaining to a trapped 40Ca+^{40}\mathrm{Ca}^{+}40Ca+ ion [D. von Lindenfels et al., Phys. Rev. Lett. 123, 080602 (2019)]. We provide a general framework for reliably studying the finite-time nanoengine in finite-time operation which accounts for quantum friction and coherence, deriving important insights into the thermodynamic behaviors beyond the classical thermal machines.