Abstract Recent theoretical and experimental studies in quantum heat engines show that, in the quasi-static regime, it is possible to have higher efficiency than the limit imposed by Carnot, provided that engineered reservoirs are used. The quasi-static regime, however, is a strong limitation to the operation of heat engines, since an infinitely long time is required to complete a cycle. In this paper we propose a two-level model as the working substance to perform a quantum Otto heat engine surrounded by a cold thermal reservoir and a squeezed hot thermal reservoir. Taking advantage of this model we show a striking achievement, that is to attain unity efficiency even at non-null power.
Abstract Recent theoretical and experimental studies in quantum heat engines show that, in the quasi-static regime, it is possible to have higher efficiency than the limit imposed by Carnot, provided that engineered reservoirs are used. The quasi-static regime, however, is a strong limitation to the operation of heat engines, since an infinitely long time is required to complete a cycle. In this paper we propose a two-level model as the working substance to perform a quantum Otto heat engine surrounded by a cold thermal reservoir and a squeezed hot thermal reservoir. Taking advantage of this model we show a striking achievement, that is to attain unity efficiency even at non-null power.
Squeezed thermal reservoirs have been proposed as a route to boosting the efficiency and power of quantum heat engines beyond the standard Carnot bound, since squeezing injects an effective negative entropy that can, in principle, be converted into extra work. What remains poorly quantified is the entropy-production cost that driving a working qubit against a squeezed bath actually incurs once finite-time operation and reservoir decoherence are taken into account. We simulate a quantum Otto-cycle heat engine built from a two-level working system coupled alternately to a hot reservoir at temperature 4.2 K, squeezed with squeezing parameter r ranging from 0 to 1.2, and an unsqueezed cold reservoir at 0.8 K, integrating the Lindblad master equation across 42 combinations of squeezing parameter and cycle duration between 0.05 and 2.0 (in units of the inverse qubit gap). At r = 0, mean entropy production per cycle was 0.223 k_B, consistent with standard finite-time Otto-cycle behaviour, but rose to 0.361 k_B at r = 1.2, a 62% increase, even as extractable work per cycle increased by 41%, from 0.184 to 0.259 (in units of the qubit gap). The ratio of work output to entropy production, an effective thermodynamic figure of merit, was therefore not monotonic in squeezing: it peaked at r = 0.6, where work per unit entropy produced reached 0.98, 15% above the unsqueezed value of 0.85, before declining at higher squeezing as entropy production began to outpace the marginal work gain. Power output at the maximum-power cycle duration increased with squeezing across the full range tested, from 0.31 (gap units) at r = 0 to 0.52 at r = 1.2, a 68% gain, but efficiency at maximum power fell from 0.41 to 0.33 over the same range, a trade-off traced out in detail in Table 1. A decomposition of total entropy production attributed 58-71% to hot-bath coupling across all squeezing values, with the squeezed-bath contribution alone rising from undefined at r = 0 to 34% of hot-bath entropy production at r = 1.2, while coherence generated during the unitary strokes accounted for a comparatively stable 12-18% regardless of squeezing strength. These results indicate that reservoir squeezing in quantum heat engines delivers a genuine power and work advantage but at a non-negligible and squeezing-dependent entropy cost, with an intermediate squeezing level offering the best entropy-normalized performance rather than the strongest squeezing tested, a finding directly relevant to the design of squeezed-bath quantum thermal devices operating under realistic decoherence.
Abstract We work on a comprehensive theoretical investigation of a three-level quantum heat engine operating with engineered squeezed thermal reservoirs. Unlike conventional quantum heat engines that use thermal reservoirs, we demonstrate that squeezed reservoirs can significantly enhance the engine's performance by increasing both efficiency and output power. Using a rigorous open-quantum-system approach, we derive the full Lindblad master equation for a three-level system interacting with hot and cold squeezed thermal baths. Through a detailed analysis of the steady-state thermodynamics, we obtain explicit expressions for heat currents, work output, and efficiency. Our results reveal that moderate squeezing parameters (r≈0.5) combined with optimal squeezing phase (ϕ=π/2) enhance the engine efficiency by up to 40\% compared to the classical Carnot limit for the same temperature ratio. The power output shows a non-monotonic behavior with squeezing, exhibiting an optimal squeezing parameter that maximizes performance. We identify three distinct operational regimes: (i) heat engine regime, (ii) refrigerator regime, and (iii) heat pump regime, which can be tuned by adjusting the squeezing phase. The efficiency at maximum power follows a universal scaling ηMP≈ηCarnot/2+Δη(r), where Δη(r) represents the squeezing-induced enhancement. Our findings provide fundamental insights into the role of non-thermal reservoirs in quantum thermodynamics and offer practical guidelines for designing high-performance quantum heat engines using squeezed light and engineered baths.
We study an Otto heat machine whose working substance is a single two-level system interacting with a cold thermal reservoir and with a squeezed hot thermal reservoir. By adjusting the squeezing or the adiabaticity parameter (the probability of transition) we show that our two-level system can function as a universal heat machine, either producing net work by consuming heat or consuming work that is used to cool or heat environments. Using our model we study the performance of these machine in the finite-time regime of the isentropic strokes, which is a regime that contributes to make them useful from a practical point of view.
Abstract We consider a quantum endoreversible Otto engine cycle and its inverse operation-Otto refrigeration cycle, employing two-level systems as the working substance and operating in dual-squeezed reservoirs. We demonstrate that the efficiency of heat engines at maximum work output and the coefficient of performance for refrigerators at the maximum χ criterion will degenerate to η − = η C/(2 – η C) and ε − = ( 9 + 8 ε C − 3 ) / 2 when symmetric squeezing is satisfied, respectively. We also investigated the influences of squeezing degree on the performance optimization of quantum Otto heat engines at the maximum work output and refrigerators at the maximum χ criterion. These analytical results show that the efficiency of heat engines at maximum work output and the coefficient of performance for refrigerators at the maximum χ criterion can be improved, reduced or even inhibited in asymmetric squeezing. Furthermore, we also find that the efficiency of quantum Otto heat engines at maximum work output is lower than that obtained from the Otto heat engines based on a single harmonic oscillator system. However, the coefficient of performance of the corresponding refrigerator is higher.
We analyze the performance of a quantum Otto cycle, employing a time-dependent harmonic oscillator as the working fluid undergoing sudden expansion and compression strokes during the adiabatic stages, coupled to a squeezed reservoir. First, we show that the maximum efficiency that our engine can achieve is 1/2 only, which is in contrast with earlier studies claiming unit efficiency under the effect of a squeezed reservoir. Then, in the high-temperature limit, we obtain analytic expressions for the upper bound on the efficiency as well as on the coefficient of performance of the Otto cycle. The obtained bounds are independent of the parameters of the system and depend on the reservoir parameters only. Additionally, with a hot squeezed thermal bath, we obtain an analytic expression for the efficiency at maximum work which satisfies the derived upper bound. Further, in the presence of squeezing in the cold reservoir, we specify an operational regime for the Otto refrigerator otherwise forbidden in the standard case. Finally, we find the cost of creating a squeezed state from the thermal state and show that in order to harvest the benefits of squeezing, it is sufficient to squeeze only one mode of the reservoir in resonance with the transition frequency of the working fluid. Further, we show that when the cost of squeezing is included in the definition of the operational efficiency of the engine, the advantages of squeezing fade away. Still, being purely quantum mechanical fuel in nature, squeezed reservoirs are beneficial in their own way by providing us with more compact energy storage medium or offering effectively high-temperature baths without being actually too hot.
We investigate the thermodynamics and fluctuations of a finite-time quantum Otto engine alter- natively driven by a hot-squeezed and a cold thermal reservoir. We show that reservoir squeezing significantly enhances the performance by increasing the thermodynamic efficiency and the power and enables higher stability by decreasing the relative power fluctuations and speeding up the convergence of quantum efficiency to its most probable value. We also demonstrate the counterintuitive result that the efficiency can be larger than the Otto limit in the finite-time operation. Experimental demonstration of this quantum heat engine can be available, based on a single-electron spin pertaining to a trapped 40Ca+ ion [D. von Lindenfels et al., Phys. Rev. Lett. 123, 080602 (2019)]. We provide a general framework for reliably studying the finite-time nanoengine in finite-time operation which accounts for quantum friction and coherence, deriving important insights into the thermodynamic behaviors beyond the classical thermal machines.