Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Nature

An entangling gate for dual-rail erasure qubits

Nitish Mehta, James D. Teoh, Taewan Noh, Ankur Agrawal, Amos Anderson, Beau Birdsall, Avadh Brahmbhatt, Winfred Byrd, Anthony Cabrera, Marc Cacioppo, Leo Carroll, Jonathan Chen, Tzu-Chiao Chien, Richard Chamberlin, Jacob C. Curtis, Doreen Danso, Sanjana Renganatha Desigan, Francesco D'Acounto, Bassel Heiba Elfeky, S. M. Farzaneh, Chase Foley, Benjamin Gudlewski, Hannah Hastings, Robert Johnson, Nishaad Khedkar, Trevor Keen, Anup Kumar, Cihan Kurter, Kamila Krawczuk, Eric Langstengel, Richard D. Li, Gangqiang Liu, Hanyi Lu, Pinlei Lu, Luke Mastalli-Kelly, Adam Maines, Michael Maxwell, Heather McCarrick, Mona Mirzaei, A. Narla, Omar Rashad, Erik Reikes, Mizanur Rahman, Rurik A. Primiani, Michael Schwaller, Ali Sabbah, Tali Shemma, Aoshuang Shi, Sitakanta Satapathy, Dean Stolpe, Jonathan Strenczewilk, Doug Szperka, Iu-Wei Sze, David Sweeney, Preetham Chandra Tikkireddi, Chin-Lun Tsung, Daren Vet Sam, Daniel K. Weiss, Zhibo Yang, Liuqi Yu, Teng Zhang, Olivier Boireau, Stephen Horton, Sean Weinberg, José Aumentado, Bryan M. Cord, Chan U Lei, Joseph O. Yuan, Shantanu Mundhada, Kevin S. Chou, S. H. Moseley, Robert J. Schoelkopf

Published Aug 5, 2026• 0 citations
Publisher

Abstract

Quantum error correction (QEC) will likely be required to realize the full potential of quantum computing, but comes with daunting hardware overheads and demands low gate errors on the physical qubits1–4. These requirements can be eased by engineering qubits with a strong error hierarchy, in which the most common noise channels are also the easiest to correct. Erasure qubits can achieve this when detectable leakage errors out of the computational subspace dominate over the residual Pauli errors5–11, resulting in higher thresholds and improved scaling with code distance5,12,13. In practice, these advantages come to fruition only if the error hierarchy is preserved as much as possible throughout all gates and operations. Here we design and realize a two-qubit entangling gate for dual-rail cavity qubits, a type of erasure qubit encoded in a pair of superconducting microwave cavities7. Our experimental demonstration confirms that the error hierarchy is largely preserved during the gate. The gate is fast (about 500 ns duration) and shows low erasure rates of approximately 0.5% per gate, remaining Pauli errors below 0.1%, and a strong bias towards dephasing errors, in which bit-flips are practically non-existent at the 10−6 level. These results enable a faster path to error-corrected systems that rapidly suppress errors as they scale; a claim we support with our detailed surface code simulations. A fast, low-error entangling gate for dual-rail cavity erasure qubits preserves a strong error hierarchy, advancing scalable quantum error correction with substantially improved fault-tolerant performance.

DOI
10.1038/s41586-026-10822-y

Related papers

A biased-erasure cavity qubit with hardware-efficient quantum error detection

Jiasheng Mai, Qiyu Liu, Xiaowei Deng +8 more

Erasure qubits are beneficial for quantum error correction due to their relaxed threshold requirements. While dual-rail erasure qubits have been demonstrated with a strong error hierarchy in circuit quantum electrodynamics, biased-erasure qubits -- where erasures originate predominantly from one logical basis state -- offer further advantages. Here, we realize a hardware-efficient biased-erasure qubit encoded in the vacuum and two-photon Fock states of a single microwave cavity. The qubit exhibits an erasure bias ratio of over 265. By using a transmon ancilla for logical measurements and mid-circuit erasure detections, we achieve logical state assignment errors below 1% and convert over 99.3% leakage errors into detected erasures. After postselection against erasures, we achieve effective logical relaxation and dephasing rates of $(6.2~\mathrm{ms})^{-1}$ and $(3.1~\mathrm{ms})^{-1}$, respectively, which exceed the erasure error rate by factors of 31 and 15, establishing a strong error hierarchy within the logical subspace. These postselected error rates indicate a coherence gain of about 6.0 beyond the break-even point set by the best physical qubit encoded in the two lowest Fock states in the cavity. Moreover, randomized benchmarking with interleaved erasure detections reveals a residual logical gate error of 0.29%. This work establishes a compact and hardware-efficient platform for biased-erasure qubits, promising concatenations into outer-level stabilizer codes toward fault-tolerant quantum computation.

quant-pharXiv:2601.21616•Jan 30, 2026•0 citations

Bias-preserving and error-detectable entangling operations in a superconducting dual-rail system

Mehta, Nitish, Teoh, James D., Taewan Noh +69 more

For useful quantum computation, error-corrected machines are required that can dramatically reduce the inevitable errors experienced by physical qubits. While significant progress has been made in approaching and exceeding the surface-code threshold in superconducting platforms, large gains in the logical error rate with increasing system size remain out of reach. This is due both to the large number of required physical qubits and the need to operate far below threshold. Importantly, by exploiting the biases and structure of the physical errors, this threshold can be raised. Erasure qubits achieve this by detecting certain errors at the hardware level. Dual-rail qubits encoded in superconducting cavities are a promising erasure qubit wherein the dominant error, photon loss, can be detected and converted to an erasure. In these approaches, the complete set of operations, including two qubit gates, must be high performance and preserve as much of the desirable hierarchy or bias in the errors as possible. Here, we design and realize a novel two-qubit gate for dual-rail erasure qubits based on superconducting microwave cavities. The gate is high-speed ($\sim$500 ns duration), and yields a residual gate infidelity after error detection below 0.1%. Moreover, we experimentally demonstrate that this gate largely preserves the favorable error structure of idling dual-rail qubits, making it ideal for error correction. We measure low erasure rates of $\sim$0.5% per gate, as well as low and asymmetric dephasing errors that occur at least three times more frequently on control qubits compared to target qubits. Bit-flip errors are practically nonexistent, bounded at the few parts per million level. This error asymmetry has not been well explored but is extremely useful in quantum error correction and flag-qubit contexts, where it can create a faster path to effective error-corrected systems.

arXiv:2503.10935•Mar 13, 2025•0 citations

Dual-rail encoding with superconducting cavities

James D. Teoh, Patrick Winkel, Harshvardhan K. Babla +15 more

The design of quantum hardware that reduces and mitigates errors is essential for practical quantum error correction (QEC) and useful quantum computation. To this end, we introduce the circuit-Quantum Electrodynamics (QED) dual-rail qubit in which our physical qubit is encoded in the single-photon subspace, [Formula: see text], of two superconducting microwave cavities. The dominant photon loss errors can be detected and converted into erasure errors, which are in general much easier to correct. In contrast to linear optics, a circuit-QED implementation of the dual-rail code offers unique capabilities. Using just one additional transmon ancilla per dual-rail qubit, we describe how to perform a gate-based set of universal operations that includes state preparation, logical readout, and parametrizable single and two-qubit gates. Moreover, first-order hardware errors in the cavities and the transmon can be detected and converted to erasure errors in all operations, leaving background Pauli errors that are orders of magnitude smaller. Hence, the dual-rail cavity qubit exhibits a favorable hierarchy of error rates and is expected to perform well below the relevant QEC thresholds with today's coherence times.

arXiv:2212.12077•Proceedings of the National Academy of Sciences•Oct 6, 2023•73 citations

Erasure Detection of a Dual-Rail Qubit Encoded in a Double-Post Superconducting Cavity

Akshay Koottandavida, Ioannis Tsioutsios, Aikaterini Kargioti +8 more

Qubits with predominantly erasure errors present distinctive advantages for quantum error correction (QEC) and fault-tolerant quantum computing. Logical qubits based on dual-rail encoding that exploit erasure detection have been recently proposed in superconducting circuit architectures, with either coupled transmons or cavities. Here, we implement a dual-rail qubit encoded in a compact, double-post superconducting cavity. Using an auxiliary transmon, we perform erasure detection on the dual-rail subspace. We characterize the behavior of the code space by a novel method to perform joint-Wigner tomography. This is based on modifying the cross-Kerr interaction between the cavity modes and the transmon. We measure an erasure rate of 3.981±0.003 (ms)^{-1} and a residual, postselected dephasing error rate up to 0.17 (ms)^{-1} within the code space. This strong hierarchy of error rates, together with the compact and hardware-efficient nature of this novel architecture, holds promise in realizing QEC schemes with enhanced thresholds and improved scaling.

arXiv:2311.04423•Physical Review Letters•May 2, 2024•37 citations

Fast, High-Fidelity Erasure Detection of Dual-Rail Qubits with Symmetrically Coupled Readout

Jimmy Shih-Chun Hung, Arbel Haim, Mouktik Raha +14 more

Erasure qubits are a promising platform for implementing hardware-efficient quantum error correction. Realizing the error-correction advantages of this encoding requires frequent mid-circuit erasure checks that are fast, high-fidelity, and scalable. Here, we realize erasure detection with a hardware-efficient circuit consisting of a single readout resonator dispersively and symmetrically coupled to both transmons of a dual-rail qubit. We use this circuit to demonstrate single-shot erasure detection in 384 ns with minimal impact on the dual-rail logical manifold, achieving a residual error per check of $6.0(2) \times 10^{-4}$, with only $8(3) \times 10^{-5}$ induced dephasing per check, and an erasure error per check of $2.54(1)\times 10^{-2}$. The high degree of matched dispersive readout coupling ($χ$-matching) within the dual-rail qubit code space also allows us to realize a new modality: time-continuous erasure detection performed in parallel with single-qubit gates. Here we achieve a median $7.2 \times 10^{-5}$ error per gate with $< 1 \times 10^{-5}$ error induced by erasure detection. This demonstrates a reduction in erasure detection overhead as well as a crucial ingredient for soft information quantum error correction. Together, these results establish symmetrically coupled dispersive readout as a fast, hardware-efficient, and scalable component for erasure-based quantum error correction using transmon dual-rail qubits.

quant-pharXiv:2604.16292•Apr 20, 2026•0 citations

Developments in superconducting erasure qubits for hardware-efficient quantum error correction

Maria Violaris, Luciana Henaut, James Wills +3 more

Quantum computers are inherently noisy, and a crucial challenge for achieving large-scale, fault-tolerant quantum computing is to implement quantum error correction. A promising direction that has made rapid recent progress is to design hardware that has a specific noise profile, leading to a significantly higher threshold for noise with certain quantum error correcting codes. This Perspective focuses on erasure qubits, which enable hardware-efficient quantum error correction, by concatenating an inner code built-in to the hardware with an outer code. We focus on implementations of dual-rail encoded erasure qubits using superconducting qubits, giving an overview of recent developments in theory and simulation, and hardware demonstrators. We also discuss the differences between implementations; near-term applications using quantum error detection; and the open problems for developing this approach towards early fault-tolerant quantum computers.

quant-pharXiv:2601.02183•Jan 6, 2026•0 citations
Quantum error correction (QEC) will likely be required to realize the full potential of quantum computing, but comes with daunting hardware overheads and demands low gate errors on the physical qubits1–4. These requirements can be eased by engineering qubits with a strong error hierarchy, in which the most common noise channels are also the easiest to correct. Erasure qubits can achieve this when detectable leakage errors out of the computational subspace dominate over the residual Pauli errors5–11, resulting in higher thresholds and improved scaling with code distance5,12,13. In practice, these advantages come to fruition only if the error hierarchy is preserved as much as possible throughout all gates and operations. Here we design and realize a two-qubit entangling gate for dual-rail cavity qubits, a type of erasure qubit encoded in a pair of superconducting microwave cavities7. Our experimental demonstration confirms that the error hierarchy is largely preserved during the gate. The gate is fast (about 500 ns duration) and shows low erasure rates of approximately 0.5% per gate, remaining Pauli errors below 0.1%, and a strong bias towards dephasing errors, in which bit-flips are practically non-existent at the 10−6 level. These results enable a faster path to error-corrected systems that rapidly suppress errors as they scale; a claim we support with our detailed surface code simulations. A fast, low-error entangling gate for dual-rail cavity erasure qubits preserves a strong error hierarchy, advancing scalable quantum error correction with substantially improved fault-tolerant performance.
Erasure qubits are beneficial for quantum error correction due to their relaxed threshold requirements. While dual-rail erasure qubits have been demonstrated with a strong error hierarchy in circuit quantum electrodynamics, biased-erasure qubits -- where erasures originate predominantly from one logical basis state -- offer further advantages. Here, we realize a hardware-efficient biased-erasure qubit encoded in the vacuum and two-photon Fock states of a single microwave cavity. The qubit exhibits an erasure bias ratio of over 265. By using a transmon ancilla for logical measurements and mid-circuit erasure detections, we achieve logical state assignment errors below 1% and convert over 99.3% leakage errors into detected erasures. After postselection against erasures, we achieve effective logical relaxation and dephasing rates of (6.2 ms)−1(6.2~\mathrm{ms})^{-1}(6.2 ms)−1 and (3.1 ms)−1(3.1~\mathrm{ms})^{-1}(3.1 ms)−1, respectively, which exceed the erasure error rate by factors of 31 and 15, establishing a strong error hierarchy within the logical subspace. These postselected error rates indicate a coherence gain of about 6.0 beyond the break-even point set by the best physical qubit encoded in the two lowest Fock states in the cavity. Moreover, randomized benchmarking with interleaved erasure detections reveals a residual logical gate error of 0.29%. This work establishes a compact and hardware-efficient platform for biased-erasure qubits, promising concatenations into outer-level stabilizer codes toward fault-tolerant quantum computation.
For useful quantum computation, error-corrected machines are required that can dramatically reduce the inevitable errors experienced by physical qubits. While significant progress has been made in approaching and exceeding the surface-code threshold in superconducting platforms, large gains in the logical error rate with increasing system size remain out of reach. This is due both to the large number of required physical qubits and the need to operate far below threshold. Importantly, by exploiting the biases and structure of the physical errors, this threshold can be raised. Erasure qubits achieve this by detecting certain errors at the hardware level. Dual-rail qubits encoded in superconducting cavities are a promising erasure qubit wherein the dominant error, photon loss, can be detected and converted to an erasure. In these approaches, the complete set of operations, including two qubit gates, must be high performance and preserve as much of the desirable hierarchy or bias in the errors as possible. Here, we design and realize a novel two-qubit gate for dual-rail erasure qubits based on superconducting microwave cavities. The gate is high-speed ($\sim$500 ns duration), and yields a residual gate infidelity after error detection below 0.1%. Moreover, we experimentally demonstrate that this gate largely preserves the favorable error structure of idling dual-rail qubits, making it ideal for error correction. We measure low erasure rates of $\sim$0.5% per gate, as well as low and asymmetric dephasing errors that occur at least three times more frequently on control qubits compared to target qubits. Bit-flip errors are practically nonexistent, bounded at the few parts per million level. This error asymmetry has not been well explored but is extremely useful in quantum error correction and flag-qubit contexts, where it can create a faster path to effective error-corrected systems.
The design of quantum hardware that reduces and mitigates errors is essential for practical quantum error correction (QEC) and useful quantum computation. To this end, we introduce the circuit-Quantum Electrodynamics (QED) dual-rail qubit in which our physical qubit is encoded in the single-photon subspace, [Formula: see text], of two superconducting microwave cavities. The dominant photon loss errors can be detected and converted into erasure errors, which are in general much easier to correct. In contrast to linear optics, a circuit-QED implementation of the dual-rail code offers unique capabilities. Using just one additional transmon ancilla per dual-rail qubit, we describe how to perform a gate-based set of universal operations that includes state preparation, logical readout, and parametrizable single and two-qubit gates. Moreover, first-order hardware errors in the cavities and the transmon can be detected and converted to erasure errors in all operations, leaving background Pauli errors that are orders of magnitude smaller. Hence, the dual-rail cavity qubit exhibits a favorable hierarchy of error rates and is expected to perform well below the relevant QEC thresholds with today's coherence times.
Qubits with predominantly erasure errors present distinctive advantages for quantum error correction (QEC) and fault-tolerant quantum computing. Logical qubits based on dual-rail encoding that exploit erasure detection have been recently proposed in superconducting circuit architectures, with either coupled transmons or cavities. Here, we implement a dual-rail qubit encoded in a compact, double-post superconducting cavity. Using an auxiliary transmon, we perform erasure detection on the dual-rail subspace. We characterize the behavior of the code space by a novel method to perform joint-Wigner tomography. This is based on modifying the cross-Kerr interaction between the cavity modes and the transmon. We measure an erasure rate of 3.981±0.003 (ms)^{-1} and a residual, postselected dephasing error rate up to 0.17 (ms)^{-1} within the code space. This strong hierarchy of error rates, together with the compact and hardware-efficient nature of this novel architecture, holds promise in realizing QEC schemes with enhanced thresholds and improved scaling.
Erasure qubits are a promising platform for implementing hardware-efficient quantum error correction. Realizing the error-correction advantages of this encoding requires frequent mid-circuit erasure checks that are fast, high-fidelity, and scalable. Here, we realize erasure detection with a hardware-efficient circuit consisting of a single readout resonator dispersively and symmetrically coupled to both transmons of a dual-rail qubit. We use this circuit to demonstrate single-shot erasure detection in 384 ns with minimal impact on the dual-rail logical manifold, achieving a residual error per check of 6.0(2)×10−46.0(2) \times 10^{-4}6.0(2)×10−4, with only 8(3)×10−58(3) \times 10^{-5}8(3)×10−5 induced dephasing per check, and an erasure error per check of 2.54(1)×10−22.54(1)\times 10^{-2}2.54(1)×10−2. The high degree of matched dispersive readout coupling (χχχ-matching) within the dual-rail qubit code space also allows us to realize a new modality: time-continuous erasure detection performed in parallel with single-qubit gates. Here we achieve a median 7.2×10−57.2 \times 10^{-5}7.2×10−5 error per gate with <1×10−5< 1 \times 10^{-5}<1×10−5 error induced by erasure detection. This demonstrates a reduction in erasure detection overhead as well as a crucial ingredient for soft information quantum error correction. Together, these results establish symmetrically coupled dispersive readout as a fast, hardware-efficient, and scalable component for erasure-based quantum error correction using transmon dual-rail qubits.
Quantum computers are inherently noisy, and a crucial challenge for achieving large-scale, fault-tolerant quantum computing is to implement quantum error correction. A promising direction that has made rapid recent progress is to design hardware that has a specific noise profile, leading to a significantly higher threshold for noise with certain quantum error correcting codes. This Perspective focuses on erasure qubits, which enable hardware-efficient quantum error correction, by concatenating an inner code built-in to the hardware with an outer code. We focus on implementations of dual-rail encoded erasure qubits using superconducting qubits, giving an overview of recent developments in theory and simulation, and hardware demonstrators. We also discuss the differences between implementations; near-term applications using quantum error detection; and the open problems for developing this approach towards early fault-tolerant quantum computers.