Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Analysis of Multistable Superconducting Quantum Interference Devices (Squids) in Keysight Advanced Design System

Mohamed Ismail Abdelrahman, Joseph Macauley, Mohamed Awida Hassan

Published Jun 7, 2026• 0 citations
Publisher

Abstract

Superconducting Quantum Interference Devices (SQUIDs) exhibit exceptional magnetic flux sensitivity due to superconducting phase interference enforced by flux quantization in a closed loop of Josephson junctions (JJs). Under certain bias conditions, JJ nonlinearity induces multistability, creating multiple potential energy minima—critical for designing robust, tunable superconducting qubits. Locating these extrema traditionally requires brute-force parameter scans, which are computationally expensive and poorly integrated into circuit workflows. We introduce the SQUID Extrema Analysis Tool, the first of its kind in a commercial circuit solver (Keysight ADS), implementing the approach of Miano et al. (PRX Quantum 4, 030324, 2023). The tool identifies stable states and extracts associated key physical quantities such as SQUID circulating current, potential energy, and effective inductance, enabling the design and optimization of multistable superconducting circuits.

DOI
10.1109/imsrftt43070.2026.11602522

Related papers

Full-Circuit Modeling and Nonlinear Analysis of Flux-Pumped SQUID Amplifiers in Keysight Advanced Design System (ADS)

Mohamed Ismail Abdelrahman, Saesun Kim, Philip Krantz +2 more

SQUID-based parametric amplifiers offer high gain, quantum-limited added noise, and wide tunability across the GHz spectrum. In this work, we present a full-circuit modeling of flux-pumped SQUID amplifiers for the first time in a commercial circuit solver (Keysight ADS) that rigorously incorporates flux quantization in the SQUID loop and the nonlinear dynamics of the Josephson junctions. Harmonic-balance analysis reproduces published small-signal gain characteristics and, in addition, reveals Duffing-type hysteresis responsible for amplifier bistability in the large-signal regime. This paper provides microwave engineers with a comprehensive circuit-level framework for flux-pumped quantum amplifier design that ensures monostable behavior.

•Jun 7, 2026•0 citations

Modeling Flux-Quantizing Josephson Junction Circuits in Keysight ADS

Ofer Naaman, Mohamed H. Awida, T. White +4 more

We introduce Josephson junction and inductor models in Keysight Advanced Design System that feature an auxiliary flux port, and facilitate the expression of flux quantization conditions in simulation of superconducting microwave circuits. We present several examples that illustrate our methodology for constructing flux-quantizing circuits, including dc- andrf-SQUIDs, tunable couplers, and parametric amplifiers using superconducting nonlinear asymmetric inductive element and rf-SQUID arrays. We perform dc, S-parameter, and harmonic balance simulations to validate our models and methods against theory and published experimental results.

arXiv:2408.07861•IEEE Transactions on Applied Superconductivity•Jan 15, 2025•15 citations

Characteristics of asymmetric superconducting quantum interference devices

G. Testa, E. Sarnelli, S. Pagano +2 more

Direct current-superconducting quantum interference devices (SQUIDs) characterized by asymmetric Josephson junctions have never been used for applications. In order to demonstrate their potential advantages, a throughout numerical analysis of different asymmetric configurations has been carried out. A damping resistance has been included in the SQUID circuit and the thermal noise associated with junction and damping resistances has been considered in the numerical model. Magnetic modulations and flux noise spectral densities have been computed as a function of many parameters (bias current, asymmetry, SQUID inductance, and damping resistance) and the performance of symmetric and asymmetric devices have been compared. The results show that, by properly optimizing the SQUID design, asymmetric SQUIDs are characterized by higher magnetic flux to voltage transfer coefficient and lower flux noise. As a result, asymmetric configurations can be very useful in all the applications where high sensitivity is required.

Journal of Applied Physics•May 1, 2001•15 citations

Bistable All-Josephson Junction SQUID with Dual Φ-Junctions for State-Controlled Superconducting Circuits

Ayisat Adedokun, Yerzhan Mustafa, Selçuk Köse

A bistable superconducting quantum interference device (SQUID) exclusively comprising Josephson junctions (JJs) is proposed. The design integrates two $2 \Phi$-JJs within the loop structure, while the state of the SQUID is monitored through a conventional $2 \pi$-periodic $\mathbf{J J}$ ($\mathbf{0}$-JJ). This configuration eliminates the need for geometric inductors, leveraging the nonlinear phase dynamics for bistability. Extensive simulations confirm robust bistable operation under controlled external flux bias, positioning the proposed SQUID as an area-efficient building block for superconducting memory cells, sensors for various applications, and SFQ-compatible logic elements.

IEEE Computer Society Annual Symposium on VLSI•Jul 6, 2025•1 citation

Flux-Driven Josephson Parametric Amplifiers Based on an RF SQUID and DC SQUID in Keysight ADS

Keith Krause, Michael C. Hamilton, Mark L. Adams

Josephson parametric amplifiers (JPAs) have become an important component of superconducting applications. Simulating these circuits is vital for optimizing their performance, including their gain and stability. Previously, simulating JPAs has been inefficient due to the limits of using SPICE-based simulators that work in the time domain. JPAs are better suited to frequency domain simulations over a broad frequency range and parameter space. We present JPA simulations using the recently released flux-aware Josephson junction (JJ) and inductor models in Keysight Advanced Design Systems (ADS). We simulate two different flux-driven JPAs: one based on an RF SQUID, and another based on a DC SQUID. We efficiently run harmonic balance simulations over a wide range of circuit parameters. We compare the use of RF and DC SQUIDs in these JPAs by analyzing their simulation results. This work provides a foundation for future SQUID-based JPA simulations in Keysight ADS.

IEEE Transactions on Applied Superconductivity•Dec 19, 2025•0 citations

Inductance analysis of superconducting quantum interference devices with 3D nano-bridge junctions

Hao Wang, Ruoting Yang, Guanqun Li +5 more

Abstract Superconducting quantum interference devices (SQUIDs) with 3D nano-bridge junctions can be miniaturized into nano-SQUIDs that are able to sense a few spins in a large magnetic field. Among all device parameters, the inductance is key to the performance of SQUIDs with 3D nano-bridge junctions. Here, we measured the critical-current magnetic flux modulation curves of 12 devices with three design types using a current strip-line directly coupled to the SQUID loop. A best flux modulation depth of 71% was achieved for our 3D Nb SQUID. From the modulation curves, we extracted the inductance values of the current stripe-line in each design and compared them with the corresponding simulation results of InductEX. In this way, London penetration depths of 110 and 420 nm were determined for our Nb (niobium) and NbN (niobium nitride) films, respectively. Furthermore, we showed that inductances of 11 and 119 pH for Nb and NbN 3D nano-bridge junctions, respectively, dominated the total inductance of our SQUID loops which are 23 pH for Nb and 255 pH for NbN. A screening parameter being equal to one suggests optimal critical currents of 89.6 and 8.1 μ A for Nb and NbN SQUIDs, respectively. Additionally, intrinsic flux noise of 110 ± 40 n Φ 0 /(Hz) 1/2 is calculated for the Nb SQUIDs with 3D nano-bridge junctions by Langevin simulation.

Superconductor Science and Technology•Mar 28, 2018•9 citations
Superconducting Quantum Interference Devices (SQUIDs) exhibit exceptional magnetic flux sensitivity due to superconducting phase interference enforced by flux quantization in a closed loop of Josephson junctions (JJs). Under certain bias conditions, JJ nonlinearity induces multistability, creating multiple potential energy minima—critical for designing robust, tunable superconducting qubits. Locating these extrema traditionally requires brute-force parameter scans, which are computationally expensive and poorly integrated into circuit workflows. We introduce the SQUID Extrema Analysis Tool, the first of its kind in a commercial circuit solver (Keysight ADS), implementing the approach of Miano et al. (PRX Quantum 4, 030324, 2023). The tool identifies stable states and extracts associated key physical quantities such as SQUID circulating current, potential energy, and effective inductance, enabling the design and optimization of multistable superconducting circuits.
SQUID-based parametric amplifiers offer high gain, quantum-limited added noise, and wide tunability across the GHz spectrum. In this work, we present a full-circuit modeling of flux-pumped SQUID amplifiers for the first time in a commercial circuit solver (Keysight ADS) that rigorously incorporates flux quantization in the SQUID loop and the nonlinear dynamics of the Josephson junctions. Harmonic-balance analysis reproduces published small-signal gain characteristics and, in addition, reveals Duffing-type hysteresis responsible for amplifier bistability in the large-signal regime. This paper provides microwave engineers with a comprehensive circuit-level framework for flux-pumped quantum amplifier design that ensures monostable behavior.
We introduce Josephson junction and inductor models in Keysight Advanced Design System that feature an auxiliary flux port, and facilitate the expression of flux quantization conditions in simulation of superconducting microwave circuits. We present several examples that illustrate our methodology for constructing flux-quantizing circuits, including dc- andrf-SQUIDs, tunable couplers, and parametric amplifiers using superconducting nonlinear asymmetric inductive element and rf-SQUID arrays. We perform dc, S-parameter, and harmonic balance simulations to validate our models and methods against theory and published experimental results.
Direct current-superconducting quantum interference devices (SQUIDs) characterized by asymmetric Josephson junctions have never been used for applications. In order to demonstrate their potential advantages, a throughout numerical analysis of different asymmetric configurations has been carried out. A damping resistance has been included in the SQUID circuit and the thermal noise associated with junction and damping resistances has been considered in the numerical model. Magnetic modulations and flux noise spectral densities have been computed as a function of many parameters (bias current, asymmetry, SQUID inductance, and damping resistance) and the performance of symmetric and asymmetric devices have been compared. The results show that, by properly optimizing the SQUID design, asymmetric SQUIDs are characterized by higher magnetic flux to voltage transfer coefficient and lower flux noise. As a result, asymmetric configurations can be very useful in all the applications where high sensitivity is required.
A bistable superconducting quantum interference device (SQUID) exclusively comprising Josephson junctions (JJs) is proposed. The design integrates two 2Φ2 \Phi2Φ-JJs within the loop structure, while the state of the SQUID is monitored through a conventional 2π2 \pi2π-periodic JJ\mathbf{J J}JJ (0\mathbf{0}0-JJ). This configuration eliminates the need for geometric inductors, leveraging the nonlinear phase dynamics for bistability. Extensive simulations confirm robust bistable operation under controlled external flux bias, positioning the proposed SQUID as an area-efficient building block for superconducting memory cells, sensors for various applications, and SFQ-compatible logic elements.
Josephson parametric amplifiers (JPAs) have become an important component of superconducting applications. Simulating these circuits is vital for optimizing their performance, including their gain and stability. Previously, simulating JPAs has been inefficient due to the limits of using SPICE-based simulators that work in the time domain. JPAs are better suited to frequency domain simulations over a broad frequency range and parameter space. We present JPA simulations using the recently released flux-aware Josephson junction (JJ) and inductor models in Keysight Advanced Design Systems (ADS). We simulate two different flux-driven JPAs: one based on an RF SQUID, and another based on a DC SQUID. We efficiently run harmonic balance simulations over a wide range of circuit parameters. We compare the use of RF and DC SQUIDs in these JPAs by analyzing their simulation results. This work provides a foundation for future SQUID-based JPA simulations in Keysight ADS.
Abstract Superconducting quantum interference devices (SQUIDs) with 3D nano-bridge junctions can be miniaturized into nano-SQUIDs that are able to sense a few spins in a large magnetic field. Among all device parameters, the inductance is key to the performance of SQUIDs with 3D nano-bridge junctions. Here, we measured the critical-current magnetic flux modulation curves of 12 devices with three design types using a current strip-line directly coupled to the SQUID loop. A best flux modulation depth of 71% was achieved for our 3D Nb SQUID. From the modulation curves, we extracted the inductance values of the current stripe-line in each design and compared them with the corresponding simulation results of InductEX. In this way, London penetration depths of 110 and 420 nm were determined for our Nb (niobium) and NbN (niobium nitride) films, respectively. Furthermore, we showed that inductances of 11 and 119 pH for Nb and NbN 3D nano-bridge junctions, respectively, dominated the total inductance of our SQUID loops which are 23 pH for Nb and 255 pH for NbN. A screening parameter being equal to one suggests optimal critical currents of 89.6 and 8.1 μ A for Nb and NbN SQUIDs, respectively. Additionally, intrinsic flux noise of 110 ± 40 n Φ 0 /(Hz) 1/2 is calculated for the Nb SQUIDs with 3D nano-bridge junctions by Langevin simulation.