Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Instrumentation and Measurement

A Noise Diagnostic and Suppression Methodology for Improving Measurement Stability of SERF Atomic Sensors

Jiaxin Liu, Puchen Gong, Xusheng Lei, Haoying Pang

Published Jan 1, 2026• 0 citations
Publisher

Abstract

Achieving high measurement stability in spin exchange relaxation free (SERF) atomic sensors is a central challenge in quantum instrumentation, yet the intrinsic noise mechanisms that ultimately limit measurement performance remain insufficiently characterized. This article proposes a model-based noise diagnostic and suppression methodology that systematically links microscopic spin fluctuations to macroscopic measurement noise. The Langevin stochastic terms are introduced into the coupled Bloch equations to form a noise characterization framework that captures stochastic excitation, dissipation, and finite correlation of the coupled electronic and nuclear spin modes, enabling identification and quantification of the noise sources responsible for spectral coloring and low-frequency accumulation in the measurement output. Two previously overlooked noise amplification pathways in the measurement system are diagnosed: projection leakage caused by nonorthogonal optical readout geometry and stochastic magnetic injection introduced by electromagnetic coupling in the temperature control subsystem. For each pathway, the targeted instrumentation optimization procedures are derived and implemented. The experimental evaluation on a SERF atomic gyroscope demonstrates that joint optimization of the heating and optical subsystems reduces the amplitude spectral density at 1 Hz from$7.66 \times 10^{-6}$to$3.12 \times 10^{{-6} {\circ }} $/s$/\sqrt {\mathrm {Hz}}$, a 41.6% improvement, and suppresses the nonwhite hump in the Allan deviation over$\tau \approx 0.1$–10 s. The proposed methodology provides a reusable, physics-informed route for diagnosing, attributing, and mitigating noise in high-stability quantum measurement systems.

DOI
10.1109/tim.2026.3706190

Related papers

Sinusoidal Noise Suppression in SERF Co-magnetometers with Allan Variance Validation

Z X Liu, Yifan Yan, Lele Ma +3 more

Spin-exchange relaxation-free (SERF) co-magnetometers, characterized by high sensitivity, compactness, and low drift, show great potential in quantum precision measurements based on atomic ensembles. However, periodic fluctuation noise—originating from laser intensity instability, heating signal crosstalk, and electronic interference—induces oscillatory artifacts in Allan variance analysis, degrading measurement accuracy and long-term stability. This study presents a periodic noise suppression scheme based on jointly optimized finite impulse response (FIR) notch filters, implemented for the first time in a SERF co-magnetometer. By precisely shaping the amplitude response through least-squares optimization, the scheme achieves targeted attenuation of interference frequencies. Experimental results confirm that the proposed method effectively suppresses periodic noise, yielding smoother Allan variance curves and significantly enhancing measurement stability. The proposed approach offers a practical and generalizable solution for improving the precision of atomic sensors and provides technical guidance for noise mitigation in broader precision measurement applications.

IEEE International Conference on Electronic Measurement & Instruments•Aug 22, 2025•0 citations

Analysis and Suppression of the Pump Light Intensity Error in the K–Rb– 21 Ne Atomic Spin Comagnetometer

Jiale Quan, Ye Liu, Longyan Ma +5 more

As a novel quantum sensor utilizing atomic spin coupling mechanisms, spin-exchange relaxation-free (SERF) comagnetometers demonstrate promising applications in precision metrology such as magnetic field and rotation sensing. However, the ultra-high precision measurement capability exhibits vulnerability to multiple disturbance factors, with pump light intensity fluctuations emerging as a critical instability source that compromises operational reliability during prolonged measurements. In this paper, a model-driven paradigm for pump light intensity error suppression in SERF comagnetometers is proposed. The nonlinear dynamics are rigorously linearized via Taylor expansion within their valid range to construct a state-space model, ultimately deriving the pump light intensity frequency response model. The proposed methodology undergoes experimental validation on a K-Rb-21Ne comagnetometry platform, confirming the predictive capability for stability degradation mechanisms. Through theoretical analysis and experimental verification, this study reveals that magneto-optical non-orthogonality, which introduces a differential component in the light intensity transfer function, creates an approximate proportional relationship between the output signal and pump light intensity within the operating bandwidth. Light intensity noise is decomposed, and light intensity errors are quantitatively evaluated via the frequency response model. To address this critical issue affecting inertial measurement accuracy, a closed-loop control-based suppression method with optimized feedback gain is proposed. By dynamically adjusting the closed-loop feedback gain through real-time intensity monitoring, the intensity instability associated with optical pumping is suppressed from 0.56% to 0.14%, concomitant with a 2.8-fold improvement in the long-term stability of the SERF comagnetometer.

IEEE Transactions on Instrumentation and Measurement•Jan 1, 2025•3 citations

The noise analysis and multi-physical field coupling study of high-precision SERF atomic gyroscopes

Jiaxin Liu, Xusheng Lei, Yu Yuan +3 more

The spin-exchange relaxation-free atomic gyroscope, with its exceptionally high theoretical precision, demonstrates immense potential to become the next-generation strategic-grade gyroscope. However, due to technological noise, there is still a significant gap between its actual precision and theoretical precision. This study identifies the key factor limiting the precision of the SERF gyroscope as coupling noise. By optimizing the detection loop structure, a distinction between the dual-axis signals' response to optical and magnetic fields was achieved—where the optical errors responded similarly, while the response to magnetic noise was opposite. Based on the differences in the optical-magnetic response of the dual-axis signals, empirical mode decomposition was used to decompose the dual-axis gyroscope signals into multiple intrinsic mode functions, and Allan deviation analysis was applied to analyze the noise characteristics of the intrinsic mode functions over various periods. This study successfully reveals that optical errors caused by thermal-optical coupling and long-period magnetic noise induced by thermal-magnetic coupling are the dominant factors limiting the long-term stability of the SERF gyroscope. Based on these analyses, the study concludes that to achieve strategic-grade precision for the SERF gyroscope, it is essential to effectively address the noise issues caused by multi-physical field couplings.

Defence Technology•Apr 26, 2025•18 citations

In situ decoupling of pump-induced spin polarization noise in atomic spin sensors

Dinghui Gong, Xiaofei Huang, Di Gong +5 more

In atomic spin sensors based on optical pumping, pump beam instabilities can drive atomic spin polarization fluctuations, referred to here as pump-induced spin polarization noise, which may limit sensitivity and long-term stability. Because the local pump field inside the cell can differ from that inferred from external optical diagnostics, it remains difficult to directly quantify the actual in situ spin polarization noise and to evaluate and suppress its contribution to the sensor noise floor. Here, we propose an in situ decoupling method based on spin dynamics, in which a large longitudinal detuning field suppresses magnetic field and rotation responses, while a transverse projection field converts pump-induced fluctuations in longitudinal spin polarization into a measurable transverse spin signal. Demonstrated in a K-Rb-21Ne spin exchange relaxation free (SERF) comagnetometer, the proposed method suppresses the magnetic-field response by approximately 180-fold and enhances the pump-power-noise response by approximately 380-fold, thereby enabling effective separation and evaluation of pump-induced spin polarization noise. The method employs the atomic ensemble as an in situ probe of the spin dynamic response to the local pump optical field. It enables quantitative identification of pump fluctuation associated noise and direct evaluation of optical field stability under actual operating conditions, thereby providing an experimental basis for optical field stabilization and noise suppression assessment in SERF comagnetometers and related alkali atomic spin sensors.

Applied Physics Letters•Aug 24, 2026•0 citations

Measurement Sensitivity Improvement of All-Optical Atomic Spin Magnetometer by Suppressing Noises

Xiyuan Chen, Hong Zhang, Sheng Zou

Quantum manipulation technology and photoelectric detection technology have jointly facilitated the rapid development of ultra-sensitive atomic spin magnetometers. To improve the output signal and sensitivity of the spin-exchange-relaxation-free (SERF) atomic spin magnetometer, the noises influencing on the output signal and the sensitivity were analyzed, and the corresponding noise suppression methods were presented. The magnetic field noises, including the residual magnetic field noise and the light shift noise, were reduced to approximately zero by employing the magnetic field compensation method and by adjusting the frequency of the pump beam, respectively. With respect to the operation temperature, the simulation results showed that the temperature of the potassium atomic spin magnetometer realizing the spin-exchange relaxation-free regime was 180 °C. Moreover, the fluctuation noises of the frequency and the power were suppressed by using the frequency and the power stable systems. The experimental power stability results showed that the light intensity stability was enhanced 10%. Contrast experiments on the sensitivity were carried out to demonstrate the validity of the suppression methods. Finally, a sensitivity of 13 fT/Hz(1/2) was successfully achieved by suppressing noises and optimizing parameters.

Sensors•Jun 17, 2016•9 citations

Suppression of thermal coupling noise in the SERF atomic co-magnetometer

Jiasen Ruan, Lihong Duan, Yang Fu +4 more

Heating the alkali metal vapor cell to obtain high atomic density is a prerequisite for realizing the high-precision measurement for spin-exchange relaxation-free (SERF) co-magnetometer. However, the thermo-magnetic and thermo-optical coupling noise caused by the temperature diffusion from the alkali vapor cell is one of the main factors restricting the co-magnetometer performance at present. Here the influence of heating on the SERF co-magnetometer was comprehensively studied, and the thermal error model of the system was established. A novel heat insulation structure for the co-magnetometer was designed, and the effectiveness was verified through monitoring of characteristic temperature points. Compared to the conventional oven support, the average maximum temperature difference within 12 h of the optical path and magnetic shielding systems (OPMSS) decreased by 52%, the bias instability of the co-magnetometer decreased by 24%, and the noise of the co-magnetometer at 1 Hz decreased by 33%. The experimental results demonstrate that this method reduces the temperature fluctuation of the OPMSS, effectively suppresses the thermal coupling noise, and thus improves the performance of the SERF co-magnetometer. Moreover, this method is also applicable to other quantum sensors based on alkali metal vapor cell.

Results in Physics•Sep 22, 2023•14 citations
Achieving high measurement stability in spin exchange relaxation free (SERF) atomic sensors is a central challenge in quantum instrumentation, yet the intrinsic noise mechanisms that ultimately limit measurement performance remain insufficiently characterized. This article proposes a model-based noise diagnostic and suppression methodology that systematically links microscopic spin fluctuations to macroscopic measurement noise. The Langevin stochastic terms are introduced into the coupled Bloch equations to form a noise characterization framework that captures stochastic excitation, dissipation, and finite correlation of the coupled electronic and nuclear spin modes, enabling identification and quantification of the noise sources responsible for spectral coloring and low-frequency accumulation in the measurement output. Two previously overlooked noise amplification pathways in the measurement system are diagnosed: projection leakage caused by nonorthogonal optical readout geometry and stochastic magnetic injection introduced by electromagnetic coupling in the temperature control subsystem. For each pathway, the targeted instrumentation optimization procedures are derived and implemented. The experimental evaluation on a SERF atomic gyroscope demonstrates that joint optimization of the heating and optical subsystems reduces the amplitude spectral density at 1 Hz from7.66×10−67.66 \times 10^{-6}7.66×10−6to3.12×10−6∘3.12 \times 10^{{-6} {\circ }} 3.12×10−6∘/s/Hz/\sqrt {\mathrm {Hz}}/Hz​, a 41.6% improvement, and suppresses the nonwhite hump in the Allan deviation overτ≈0.1\tau \approx 0.1τ≈0.1–10 s. The proposed methodology provides a reusable, physics-informed route for diagnosing, attributing, and mitigating noise in high-stability quantum measurement systems.
Spin-exchange relaxation-free (SERF) co-magnetometers, characterized by high sensitivity, compactness, and low drift, show great potential in quantum precision measurements based on atomic ensembles. However, periodic fluctuation noise—originating from laser intensity instability, heating signal crosstalk, and electronic interference—induces oscillatory artifacts in Allan variance analysis, degrading measurement accuracy and long-term stability. This study presents a periodic noise suppression scheme based on jointly optimized finite impulse response (FIR) notch filters, implemented for the first time in a SERF co-magnetometer. By precisely shaping the amplitude response through least-squares optimization, the scheme achieves targeted attenuation of interference frequencies. Experimental results confirm that the proposed method effectively suppresses periodic noise, yielding smoother Allan variance curves and significantly enhancing measurement stability. The proposed approach offers a practical and generalizable solution for improving the precision of atomic sensors and provides technical guidance for noise mitigation in broader precision measurement applications.
As a novel quantum sensor utilizing atomic spin coupling mechanisms, spin-exchange relaxation-free (SERF) comagnetometers demonstrate promising applications in precision metrology such as magnetic field and rotation sensing. However, the ultra-high precision measurement capability exhibits vulnerability to multiple disturbance factors, with pump light intensity fluctuations emerging as a critical instability source that compromises operational reliability during prolonged measurements. In this paper, a model-driven paradigm for pump light intensity error suppression in SERF comagnetometers is proposed. The nonlinear dynamics are rigorously linearized via Taylor expansion within their valid range to construct a state-space model, ultimately deriving the pump light intensity frequency response model. The proposed methodology undergoes experimental validation on a K-Rb-21Ne comagnetometry platform, confirming the predictive capability for stability degradation mechanisms. Through theoretical analysis and experimental verification, this study reveals that magneto-optical non-orthogonality, which introduces a differential component in the light intensity transfer function, creates an approximate proportional relationship between the output signal and pump light intensity within the operating bandwidth. Light intensity noise is decomposed, and light intensity errors are quantitatively evaluated via the frequency response model. To address this critical issue affecting inertial measurement accuracy, a closed-loop control-based suppression method with optimized feedback gain is proposed. By dynamically adjusting the closed-loop feedback gain through real-time intensity monitoring, the intensity instability associated with optical pumping is suppressed from 0.56% to 0.14%, concomitant with a 2.8-fold improvement in the long-term stability of the SERF comagnetometer.
The spin-exchange relaxation-free atomic gyroscope, with its exceptionally high theoretical precision, demonstrates immense potential to become the next-generation strategic-grade gyroscope. However, due to technological noise, there is still a significant gap between its actual precision and theoretical precision. This study identifies the key factor limiting the precision of the SERF gyroscope as coupling noise. By optimizing the detection loop structure, a distinction between the dual-axis signals' response to optical and magnetic fields was achieved—where the optical errors responded similarly, while the response to magnetic noise was opposite. Based on the differences in the optical-magnetic response of the dual-axis signals, empirical mode decomposition was used to decompose the dual-axis gyroscope signals into multiple intrinsic mode functions, and Allan deviation analysis was applied to analyze the noise characteristics of the intrinsic mode functions over various periods. This study successfully reveals that optical errors caused by thermal-optical coupling and long-period magnetic noise induced by thermal-magnetic coupling are the dominant factors limiting the long-term stability of the SERF gyroscope. Based on these analyses, the study concludes that to achieve strategic-grade precision for the SERF gyroscope, it is essential to effectively address the noise issues caused by multi-physical field couplings.
In atomic spin sensors based on optical pumping, pump beam instabilities can drive atomic spin polarization fluctuations, referred to here as pump-induced spin polarization noise, which may limit sensitivity and long-term stability. Because the local pump field inside the cell can differ from that inferred from external optical diagnostics, it remains difficult to directly quantify the actual in situ spin polarization noise and to evaluate and suppress its contribution to the sensor noise floor. Here, we propose an in situ decoupling method based on spin dynamics, in which a large longitudinal detuning field suppresses magnetic field and rotation responses, while a transverse projection field converts pump-induced fluctuations in longitudinal spin polarization into a measurable transverse spin signal. Demonstrated in a K-Rb-21Ne spin exchange relaxation free (SERF) comagnetometer, the proposed method suppresses the magnetic-field response by approximately 180-fold and enhances the pump-power-noise response by approximately 380-fold, thereby enabling effective separation and evaluation of pump-induced spin polarization noise. The method employs the atomic ensemble as an in situ probe of the spin dynamic response to the local pump optical field. It enables quantitative identification of pump fluctuation associated noise and direct evaluation of optical field stability under actual operating conditions, thereby providing an experimental basis for optical field stabilization and noise suppression assessment in SERF comagnetometers and related alkali atomic spin sensors.
Quantum manipulation technology and photoelectric detection technology have jointly facilitated the rapid development of ultra-sensitive atomic spin magnetometers. To improve the output signal and sensitivity of the spin-exchange-relaxation-free (SERF) atomic spin magnetometer, the noises influencing on the output signal and the sensitivity were analyzed, and the corresponding noise suppression methods were presented. The magnetic field noises, including the residual magnetic field noise and the light shift noise, were reduced to approximately zero by employing the magnetic field compensation method and by adjusting the frequency of the pump beam, respectively. With respect to the operation temperature, the simulation results showed that the temperature of the potassium atomic spin magnetometer realizing the spin-exchange relaxation-free regime was 180 °C. Moreover, the fluctuation noises of the frequency and the power were suppressed by using the frequency and the power stable systems. The experimental power stability results showed that the light intensity stability was enhanced 10%. Contrast experiments on the sensitivity were carried out to demonstrate the validity of the suppression methods. Finally, a sensitivity of 13 fT/Hz(1/2) was successfully achieved by suppressing noises and optimizing parameters.
Heating the alkali metal vapor cell to obtain high atomic density is a prerequisite for realizing the high-precision measurement for spin-exchange relaxation-free (SERF) co-magnetometer. However, the thermo-magnetic and thermo-optical coupling noise caused by the temperature diffusion from the alkali vapor cell is one of the main factors restricting the co-magnetometer performance at present. Here the influence of heating on the SERF co-magnetometer was comprehensively studied, and the thermal error model of the system was established. A novel heat insulation structure for the co-magnetometer was designed, and the effectiveness was verified through monitoring of characteristic temperature points. Compared to the conventional oven support, the average maximum temperature difference within 12 h of the optical path and magnetic shielding systems (OPMSS) decreased by 52%, the bias instability of the co-magnetometer decreased by 24%, and the noise of the co-magnetometer at 1 Hz decreased by 33%. The experimental results demonstrate that this method reduces the temperature fluctuation of the OPMSS, effectively suppresses the thermal coupling noise, and thus improves the performance of the SERF co-magnetometer. Moreover, this method is also applicable to other quantum sensors based on alkali metal vapor cell.