Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Frontiers of Physics

Differential interference metrology in crystal optics

Rong Wang, Qiang Yang, Xiaohui Ling, Hailu Luo

Published Jan 1, 2026• 0 citations
Publisher

Abstract

Conventional differential interference contrast (DIC) microscopy is inherently qualitative and lacks metrological capability, whereas high-precision techniques such as weak value amplification impose stringent experimental requirements. Here, we present a compact transmissive differential interferometric measurement system based on a birefringent crystal. By functioning as an interference element, the crystal enables quantitative differential interference measurements in both real space and momentum space. This approach avoids the dependence of weak value amplification on weak coupling and non-orthogonal state selection, while retaining and utilizing the inherent birefringent phase information of the crystal. We propose two modulation strategies and establish a unified theoretical model linking microscopic crystal parameters to macroscopic interferometric observations. Based on this model, the system can achieve an angular resolution on the order of 10−9 rad, which exceeds that of typical commercial polarimeters, and detects displacements as small as 0.35 nm, demonstrating nanometer-scale sensing capability. Owing to its compact design and tunable parameters, this system offers a compact quantitative approach for high-precision applications, including chiral sensing, nanometrology, and quantum material analysis.

DOI
10.15302/frontphys.2026.122201

Related papers

Realization of ultra-small stress birefringence detection with weak-value amplification technique

Yongsheng Wang, Shizhen Chen, Shuangchun Wen +1 more

How to realize the detection of tiny birefringence is an important but challenging issue for investigations and applications in optics. In weak measurements, weak-value amplification has been widely applied to the precise estimation of time delay. Here, we show that the linear amplification in weak measurements has the potential to outperform standard weak-value amplification for ultra-small parameter characterization. The higher measurement accuracy in the linear amplification enables us to achieve a measurement of stress-induced birefringence with a high resolution of 5×10−10. Compared with existing methods, the accuracy based on weak measurements for birefringence detection can improve two orders of magnitude. Our method may have important applications in a variety of fields involving the precise measurement of time delay or birefringence.

Applied Physics Letters•Apr 19, 2021•20 citations

Practical sub-nanometer optical path difference metrology using biased weak measurement with real weak values

Huang Jing-Hui, Jing-zheng Huang, Hongliang Cui +5 more

We experimentally demonstrate a sub-nanometer optical path difference (OPD) metrology scheme based on biased weak measurement (BWM) with real weak values using a classical coherent light source. By introducing a controlled bias phase in a Mach-Zehnder interferometric configuration, the proposed approach enables enhanced detection of sub-nanometer OPD variations while maintaining compatibility with common optical components and narrowband light sources. We systematically compare the measurement response, sensitivity, and signal-to-noise ratio (SNR) of BWM with those of standard weak measurement (SWM) and conventional interferometric measurement (CM) under identical experimental conditions. Relative to SWM, BWM provides an approximately fourfold enhancement in measurement response within the linear operating range, while achieving a (94 ± 10)-fold signal amplification compared with CM. Furthermore, the measured SNR exhibits an order-of-magnitude improvement over CM under detector-saturation-limited measurement conditions. Experimentally, the BWM scheme achieves a minimum detectable OPD of (5.6 ± 0.36) × 10 −4 nm, obtained from Allan deviation analysis. These results highlight the potential of weak measurement as a practical strategy for high-precision optical path metrology and precision interferometric sensing.

Optics Express•Aug 25, 2026•0 citations

Sub-Diffraction Limit Quantum Metrology for Nanofabrication

Wenyi Ye, Yang Li, Lianwei Chen +10 more

Optical monitoring of object position and alignment with nanoscale precision is critical for ultra-precision measurement applications, such as micro/nano-fabrication, weak force sensing, and microscopic imaging. Traditional optical nanometry methods often rely on precision nanostructure fabrication, multi-beam interferometry , or complex post-processing algorithms, which can limit their practical use. In this study, we introduced a simplified and robust quantum measurement technique with an achievable resolution of 2.2 pm and an experimental demonstration of 1 nm resolution, distinguishing it from conventional interferometry , which depended on multiple reference beams. We designed a metasurface substrate with a mode-conversion function, in which an incident Gaussian beam is converted into higher-order transverse electromagnetic mode (TEM) modes. A theoretical analysis, including calculations of the Fisher information , demonstrated that the accuracy was maintained for nanoscale displacements. In conclusion, the study findings provide a new approach for precise alignment and metrology of nanofabrication and other advanced applications.

Engineering•Apr 22, 2025•2 citations

Generalized framework of weak-value amplification in path interference of polarized light for the enhancement of all possible polarization anisotropy effects

Niladri Modak, B S Athira, Ankit Kumar Singh +1 more

Using the profound interferometric philosophy of weak-value amplification, we propose a simple, general, and robust polarization method for the amplification and quantification of small magnitudes of all possible polarization anisotropy effects in a single experimental embodiment. The approach is experimentally realized by introducing a weak coupling between the polarization degree of freedom of light and the path degree of freedom in a Mach-Zehnder interferometer in the presence of a weak anisotropy effect. Real and imaginary weak-value amplifications of different polarization anisotropy effects are manifested as characteristic changes in the relevant Stokes vector elements at the exit port of the interferometer, which follow orthogonal trajectories in the Poincar\'e sphere. The proof-of-concept experiment demonstrates that by using this scheme, one can faithfully extract and quantify an anisotropy parameter that is smaller than the typical sensitivity of measurement of a given Stokes parameter of a traditional polarimeter by a large weak-value amplification factor. This opens up the possibility of a sample measuring weak-value polarimeter for studying the rich variety of fundamental optical effects and for materials characterization and precision metrology.

arXiv:2002.10093•Physical Review A•May 19, 2021•8 citations

Robust Interferometric Sensing Using Two-Photon Interference

G. H. Aguilar, R. S. Piera, Pablo L. Saldanha +2 more

Precise measurement of the angular deviation of an object is a common task in science and technology. Many methods use light for this purpose. Some of these exploit interference effects to achieve technological advantages, such as amplification effects, or simplified measurement devices. However, all of these schemes require phase stability to be useful. Here we show theoretically and experimentally that this drawback can be lifted by utilizing two-photon interference, which is known to be less sensitive to phase fluctuations. Our results show that nonclassical interference can provide a path towards robust interferometric sensing, allowing for increased metrological precision in the presence of phase noise.

arXiv:2005.05263•Physical Review Applied•Aug 12, 2020•13 citations

High-Precision Mapping of Diamond Crystal Strain Using Quantum Interferometry

Mason C. Marshall, Reza Ebadi, Connor Hart +4 more

Crystal-strain variation imposes significant limitations on many quantum sensing and information applications for solid-state defect qubits in diamond. Thus, the precision measurement and control of diamond crystal strain is a key challenge. Here, we report diamond strain measurements with a unique set of capabilities, including micron-scale spatial resolution, a millimeter-scale field of view, and a 2-order-of-magnitude improvement in volume-normalized sensitivity over previous work, reaching $5(2)\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}8}/\sqrt{\mathrm{Hz}\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}{\mathrm{m}}^{\ensuremath{-}3}}$ (with spin-strain coupling coefficients representing the dominant systematic uncertainty). We use strain-sensitive spin-state interferometry on ensembles of nitrogen-vacancy ($\mathrm{N}$-$V$) color centers in single-crystal bulk diamond with low strain gradients. This quantum interferometry technique provides insensitivity to magnetic-field inhomogeneity from the electronic and nuclear spin bath, thereby enabling long $\mathrm{N}$-$V$--ensemble electronic spin dephasing times and enhanced strain sensitivity, as well as broadening the potential applications of the technique beyond isotopically enriched or high-purity diamond. We demonstrate the strain-sensitive measurement protocol first on a confocal scanning laser microscope, providing quantitative measurement of sensitivity as well as three-dimensional strain mapping; and second on a wide-field-imaging quantum diamond microscope. Our strain-microscopy technique enables fast, sensitive characterization for diamond material engineering and nanofabrication; as well as diamond-based sensing of strains applied externally, as in diamond anvil cells or embedded diamond stress sensors, or internally, as by crystal damage due to particle-induced nuclear recoils.

arXiv:2108.00304•Physical Review Applied•Feb 15, 2022•36 citations
Conventional differential interference contrast (DIC) microscopy is inherently qualitative and lacks metrological capability, whereas high-precision techniques such as weak value amplification impose stringent experimental requirements. Here, we present a compact transmissive differential interferometric measurement system based on a birefringent crystal. By functioning as an interference element, the crystal enables quantitative differential interference measurements in both real space and momentum space. This approach avoids the dependence of weak value amplification on weak coupling and non-orthogonal state selection, while retaining and utilizing the inherent birefringent phase information of the crystal. We propose two modulation strategies and establish a unified theoretical model linking microscopic crystal parameters to macroscopic interferometric observations. Based on this model, the system can achieve an angular resolution on the order of 10−9 rad, which exceeds that of typical commercial polarimeters, and detects displacements as small as 0.35 nm, demonstrating nanometer-scale sensing capability. Owing to its compact design and tunable parameters, this system offers a compact quantitative approach for high-precision applications, including chiral sensing, nanometrology, and quantum material analysis.
How to realize the detection of tiny birefringence is an important but challenging issue for investigations and applications in optics. In weak measurements, weak-value amplification has been widely applied to the precise estimation of time delay. Here, we show that the linear amplification in weak measurements has the potential to outperform standard weak-value amplification for ultra-small parameter characterization. The higher measurement accuracy in the linear amplification enables us to achieve a measurement of stress-induced birefringence with a high resolution of 5×10−10. Compared with existing methods, the accuracy based on weak measurements for birefringence detection can improve two orders of magnitude. Our method may have important applications in a variety of fields involving the precise measurement of time delay or birefringence.
We experimentally demonstrate a sub-nanometer optical path difference (OPD) metrology scheme based on biased weak measurement (BWM) with real weak values using a classical coherent light source. By introducing a controlled bias phase in a Mach-Zehnder interferometric configuration, the proposed approach enables enhanced detection of sub-nanometer OPD variations while maintaining compatibility with common optical components and narrowband light sources. We systematically compare the measurement response, sensitivity, and signal-to-noise ratio (SNR) of BWM with those of standard weak measurement (SWM) and conventional interferometric measurement (CM) under identical experimental conditions. Relative to SWM, BWM provides an approximately fourfold enhancement in measurement response within the linear operating range, while achieving a (94 ± 10)-fold signal amplification compared with CM. Furthermore, the measured SNR exhibits an order-of-magnitude improvement over CM under detector-saturation-limited measurement conditions. Experimentally, the BWM scheme achieves a minimum detectable OPD of (5.6 ± 0.36) × 10 −4 nm, obtained from Allan deviation analysis. These results highlight the potential of weak measurement as a practical strategy for high-precision optical path metrology and precision interferometric sensing.
Optical monitoring of object position and alignment with nanoscale precision is critical for ultra-precision measurement applications, such as micro/nano-fabrication, weak force sensing, and microscopic imaging. Traditional optical nanometry methods often rely on precision nanostructure fabrication, multi-beam interferometry , or complex post-processing algorithms, which can limit their practical use. In this study, we introduced a simplified and robust quantum measurement technique with an achievable resolution of 2.2 pm and an experimental demonstration of 1 nm resolution, distinguishing it from conventional interferometry , which depended on multiple reference beams. We designed a metasurface substrate with a mode-conversion function, in which an incident Gaussian beam is converted into higher-order transverse electromagnetic mode (TEM) modes. A theoretical analysis, including calculations of the Fisher information , demonstrated that the accuracy was maintained for nanoscale displacements. In conclusion, the study findings provide a new approach for precise alignment and metrology of nanofabrication and other advanced applications.
Using the profound interferometric philosophy of weak-value amplification, we propose a simple, general, and robust polarization method for the amplification and quantification of small magnitudes of all possible polarization anisotropy effects in a single experimental embodiment. The approach is experimentally realized by introducing a weak coupling between the polarization degree of freedom of light and the path degree of freedom in a Mach-Zehnder interferometer in the presence of a weak anisotropy effect. Real and imaginary weak-value amplifications of different polarization anisotropy effects are manifested as characteristic changes in the relevant Stokes vector elements at the exit port of the interferometer, which follow orthogonal trajectories in the Poincar\'e sphere. The proof-of-concept experiment demonstrates that by using this scheme, one can faithfully extract and quantify an anisotropy parameter that is smaller than the typical sensitivity of measurement of a given Stokes parameter of a traditional polarimeter by a large weak-value amplification factor. This opens up the possibility of a sample measuring weak-value polarimeter for studying the rich variety of fundamental optical effects and for materials characterization and precision metrology.
Precise measurement of the angular deviation of an object is a common task in science and technology. Many methods use light for this purpose. Some of these exploit interference effects to achieve technological advantages, such as amplification effects, or simplified measurement devices. However, all of these schemes require phase stability to be useful. Here we show theoretically and experimentally that this drawback can be lifted by utilizing two-photon interference, which is known to be less sensitive to phase fluctuations. Our results show that nonclassical interference can provide a path towards robust interferometric sensing, allowing for increased metrological precision in the presence of phase noise.
Crystal-strain variation imposes significant limitations on many quantum sensing and information applications for solid-state defect qubits in diamond. Thus, the precision measurement and control of diamond crystal strain is a key challenge. Here, we report diamond strain measurements with a unique set of capabilities, including micron-scale spatial resolution, a millimeter-scale field of view, and a 2-order-of-magnitude improvement in volume-normalized sensitivity over previous work, reaching $5(2)\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}8}/\sqrt{\mathrm{Hz}\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}{\mathrm{m}}^{\ensuremath{-}3}}$ (with spin-strain coupling coefficients representing the dominant systematic uncertainty). We use strain-sensitive spin-state interferometry on ensembles of nitrogen-vacancy (N\mathrm{N}N-VVV) color centers in single-crystal bulk diamond with low strain gradients. This quantum interferometry technique provides insensitivity to magnetic-field inhomogeneity from the electronic and nuclear spin bath, thereby enabling long N\mathrm{N}N-VVV--ensemble electronic spin dephasing times and enhanced strain sensitivity, as well as broadening the potential applications of the technique beyond isotopically enriched or high-purity diamond. We demonstrate the strain-sensitive measurement protocol first on a confocal scanning laser microscope, providing quantitative measurement of sensitivity as well as three-dimensional strain mapping; and second on a wide-field-imaging quantum diamond microscope. Our strain-microscopy technique enables fast, sensitive characterization for diamond material engineering and nanofabrication; as well as diamond-based sensing of strains applied externally, as in diamond anvil cells or embedded diamond stress sensors, or internally, as by crystal damage due to particle-induced nuclear recoils.