Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Sixth Symposium on Novel Optoelectronic Detection Technology and Applications

A highly integrated real-time control system based on RFSoC for quantum physics experiments

Ruihao Wu, Bo Wang, Chengyu Wu, 祁宾祥

Published May 11, 2026• 0 citations
Publisher

Abstract

Advanced quantum physics experiments place strict demands on control electronics, including phase-coherent multichannel RF/microwave generation, precise timing synchronization, low-latency response, and simultaneous support for wideband and near-DC signal processing. Existing control platforms often face trade-offs between channel count, integration level, and real-time performance, limiting scalability and experimental flexibility. In this work, we present a highly integrated real-time control system based on an XCZU49DR RFSoC. The platform integrates up to 16 RF DAC channels (9.85 GSa/s) and 16 RF ADC channels (2.5GSa/s) on a single chip, enabling synchronous multichannel signal generation and acquisition with deterministic timing. A custom RF front-end supports both broadband RF operation and low-frequency signal conditioning, while on-chip digital up/down conversion and programmable logic enable flexible waveform synthesis and real-time data processing. Performance characterization shows clean RF and microwave generation with spurious components suppressed below −59.0dBm at 200MHz and below −62.6dBm at 2.9GHz, while phase noise reaches −120.0dBc/Hz and −96.9dBc/Hz at 1kHz offset for 200MHz and 2.9GHz carriers, respectively, confirming low-noise and phase-coherent operation over a wide frequency range. The proposed platform provides a compact, scalable, and reconfigurable solution for quantum control and precision measurement. It is currently being applied to experiments involving NV centers and trapped ions, and can be readily adapted to other quantum systems, offering a practical foundation for next-generation

DOI
10.1117/12.3109571

Related papers

ICARUS-Q: Integrated control and readout unit for scalable quantum processors

Kun Hee Park, Yung Szen Yap, Yuanzheng Paul Tan +8 more

We present a control and measurement setup for superconducting qubits based on the Xilinx 16-channel radio-frequency system-on-chip (RFSoC) device. The proposed setup consists of four parts: multiple RFSoC boards, a setup to synchronize every digital to analog converter (DAC) and analog to digital converter (ADC) channel across multiple boards, a low-noise direct current supply for tuning the qubit frequency, and cloud access for remotely performing experiments. We also designed the setup to be free of physical mixers. The RFSoC boards directly generate microwave pulses using sixteen DAC channels up to the third Nyquist zone, which are directly sampled by its eight ADC channels between the fifth and the ninth zones.

arXiv:2112.02933•Review of Scientific Instruments•Oct 1, 2022•22 citations

A Hardware-Accelerated Qubit Control System for Quantum Information Processing

Nizar Messaoudi, Clayton Crocker, Marc Almendros

In this paper we present a flexible, high-performance, integrated qubit control system using modular PXIe equipment. To manipulate qubits, a classical control system is required to generate and acquire a mix of baseband, radio frequency, and/or optical signals, with the specific mix different for each qubit technology. Typically, a quantum system requires many of these signals with a high degree of synchronization and phase coherence, and increasingly needs real-time data processing and on-the-fly sequencing capabilities for feedback experiments. The proposed system is scalable to hundreds of channels, all of them being phase coherent and fully time-synchronized.The system includes a programmable real-time sequencer for precise execution timing and decision making; and open FPGA capabilities for custom Digital Signal Processing (DSP) by hardware. Using the latter, we present FPGA IP to generate one-/two-qubit gates efficiently with the AWG, and to analyze high-frequency signals to measure the qubit states in real time on the digitizers. This IP features very low latencies for Quantum Error Correction (QEC) and Frequency Division Multiplexing (FDM) capabilities, among others.

Conference on Design of Circuits and Integrated Systems•Nov 18, 2020•6 citations

Superconducting qubit readout and control system based on FPGA and development of a pulse sequencer

BOVE, LEONARDO

This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.

•Sep 27, 2025•0 citations

Programmable and scalable radio-frequency pulse sequence generator for multi-qubit quantum information experiments

B. C. Keitch, Vlad Negnevitsky, Weida Zhang

We present a versatile rf pulse control system that has been designed for multi-qubit quantum experiments. One instrument can be scaled to provide 32 channels of rf between 10 - 450 MHz. Synchronization can be achieved across multiple instruments. By using direct digital synthesis and custom control circuitry contained within a field-programmable gate array, sequences of transform-limited pulses can be produced. These have been used to carry out quantum gates that are able to meet fault-tolerant thresholds for single- and two-qubit gate fidelities, as published elsewhere. We have also extended the frequency to the gigahertz regime using additional mixers to address hyperfine transitions in atomic systems. The system uses an efficient memory management scheme and a low-latency communications protocol that allows pulse sequences to be updated in real-time. Together these can enable outcome-based algorithms such as quantum error correction to be executed. The system is fully programmable in C++, and other languages such as Python can be supported by the on-board CPU, offering a highly flexible platform for a wide variety of experimental systems, and has been proven in trapped-ion quantum information experiments.

arXiv:1710.04282•Oct 11, 2017•2 citations

Manarat: A scalable QICK-based control system for superconducting quantum processors supporting synchronized control of 10 flux-tunable qubits

Agustin Silva, Alvaro Orgaz Fuertes

A scalable control architecture for superconducting quantum processors is essential as the number of qubits increases and coherent multi-qubit operations span beyond the capacity of a single control module. The Quantum Instrumentation Control Kit (QICK), built on AMD RFSoC platforms, offers a flexible open-source framework for pulse-level qubit control but lacks native support for multi-board synchronization, limiting its applicability to mid- and large-scale quantum devices. To overcome this limitation, we introduce Manarat, a scalable multi-board control platform based on QICK that incorporates hardware, firmware, and software enhancements to enable sub-100 ps timing alignment across multiple AMD ZCU216 RFSoC boards. Our system integrates a low-jitter clock distribution network, modifications to the tProcessor, and a synchronization scheme to ensure deterministic alignment of program execution across boards. It also includes a custom analog front-end for flux control that combines high-speed RF signals with software-programmable DC biasing voltages generated by a low-noise, high-precision DAC. These capabilities are complemented by a software stack capable of orchestrating synchronized multi-board experiments and fully integrated with the open-source Qibo framework for quantum device calibration and algorithm execution. We validate Manarat on a 10-qubit superconducting processor controlled by two RFSoC boards, demonstrating reliable execution of synchronized control sequences for cross-board CZ gate calibration. These results confirm that sub-nanosecond synchronization and coherent control are achievable across multiple RFSoC boards, enabling scalable operation of superconducting quantum computers.

arXiv:2507.10676•Review of Scientific Instruments•Feb 1, 2026•1 citation

High-Fidelity Control of Superconducting Qubits Using Direct Microwave Synthesis in Higher Nyquist Zones

William D. Kalfus, Diana F. Lee, Guilhem J. Ribeill +5 more

Control electronics for superconducting quantum processors have strict requirements for accurate command of the sensitive quantum states of their qubits. Hinging on the purity of ultra-phase-stable oscillators to upconvert very-low-noise baseband pulses, conventional control systems can become prohibitively complex and expensive when scaling to larger quantum devices, especially as high sampling rates become desirable for fine-grained pulse shaping. Few-gigahertz radio-frequency (RF) digital-to-analog converters (DACs) present a more economical avenue for high-fidelity control while simultaneously providing greater command over the spectrum of the synthesized signal. Modern RF DACs with extra-wide bandwidths are able to directly synthesize tones above their sampling rates, thereby keeping the system clock rate at a level compatible with modern digital logic systems while still being able to generate high-frequency pulses with arbitrary profiles. We have incorporated custom superconducting qubit control logic into off-the-shelf hardware capable of low-noise pulse synthesis up to 7.5 GHz using an RF DAC clocked at 5 GHz. Our approach enables highly linear and stable microwave synthesis over a wide bandwidth, giving rise to high-resolution control and a reduced number of required signal sources per qubit. We characterize the performance of the hardware using a five-transmon superconducting device and demonstrate consistently reduced two-qubit gate error (as low as 1.8%), which we show results from superior control chain linearity compared to traditional configurations. The exceptional flexibility and stability further establish a foundation for scalable quantum control beyond intermediate-scale devices.

arXiv:2008.02873•IEEE Transactions on Quantum Engineering•Jan 1, 2020•27 citations
Advanced quantum physics experiments place strict demands on control electronics, including phase-coherent multichannel RF/microwave generation, precise timing synchronization, low-latency response, and simultaneous support for wideband and near-DC signal processing. Existing control platforms often face trade-offs between channel count, integration level, and real-time performance, limiting scalability and experimental flexibility. In this work, we present a highly integrated real-time control system based on an XCZU49DR RFSoC. The platform integrates up to 16 RF DAC channels (9.85 GSa/s) and 16 RF ADC channels (2.5GSa/s) on a single chip, enabling synchronous multichannel signal generation and acquisition with deterministic timing. A custom RF front-end supports both broadband RF operation and low-frequency signal conditioning, while on-chip digital up/down conversion and programmable logic enable flexible waveform synthesis and real-time data processing. Performance characterization shows clean RF and microwave generation with spurious components suppressed below −59.0dBm at 200MHz and below −62.6dBm at 2.9GHz, while phase noise reaches −120.0dBc/Hz and −96.9dBc/Hz at 1kHz offset for 200MHz and 2.9GHz carriers, respectively, confirming low-noise and phase-coherent operation over a wide frequency range. The proposed platform provides a compact, scalable, and reconfigurable solution for quantum control and precision measurement. It is currently being applied to experiments involving NV centers and trapped ions, and can be readily adapted to other quantum systems, offering a practical foundation for next-generation
We present a control and measurement setup for superconducting qubits based on the Xilinx 16-channel radio-frequency system-on-chip (RFSoC) device. The proposed setup consists of four parts: multiple RFSoC boards, a setup to synchronize every digital to analog converter (DAC) and analog to digital converter (ADC) channel across multiple boards, a low-noise direct current supply for tuning the qubit frequency, and cloud access for remotely performing experiments. We also designed the setup to be free of physical mixers. The RFSoC boards directly generate microwave pulses using sixteen DAC channels up to the third Nyquist zone, which are directly sampled by its eight ADC channels between the fifth and the ninth zones.
In this paper we present a flexible, high-performance, integrated qubit control system using modular PXIe equipment. To manipulate qubits, a classical control system is required to generate and acquire a mix of baseband, radio frequency, and/or optical signals, with the specific mix different for each qubit technology. Typically, a quantum system requires many of these signals with a high degree of synchronization and phase coherence, and increasingly needs real-time data processing and on-the-fly sequencing capabilities for feedback experiments. The proposed system is scalable to hundreds of channels, all of them being phase coherent and fully time-synchronized.The system includes a programmable real-time sequencer for precise execution timing and decision making; and open FPGA capabilities for custom Digital Signal Processing (DSP) by hardware. Using the latter, we present FPGA IP to generate one-/two-qubit gates efficiently with the AWG, and to analyze high-frequency signals to measure the qubit states in real time on the digitizers. This IP features very low latencies for Quantum Error Correction (QEC) and Frequency Division Multiplexing (FDM) capabilities, among others.
This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.
We present a versatile rf pulse control system that has been designed for multi-qubit quantum experiments. One instrument can be scaled to provide 32 channels of rf between 10 - 450 MHz. Synchronization can be achieved across multiple instruments. By using direct digital synthesis and custom control circuitry contained within a field-programmable gate array, sequences of transform-limited pulses can be produced. These have been used to carry out quantum gates that are able to meet fault-tolerant thresholds for single- and two-qubit gate fidelities, as published elsewhere. We have also extended the frequency to the gigahertz regime using additional mixers to address hyperfine transitions in atomic systems. The system uses an efficient memory management scheme and a low-latency communications protocol that allows pulse sequences to be updated in real-time. Together these can enable outcome-based algorithms such as quantum error correction to be executed. The system is fully programmable in C++, and other languages such as Python can be supported by the on-board CPU, offering a highly flexible platform for a wide variety of experimental systems, and has been proven in trapped-ion quantum information experiments.
A scalable control architecture for superconducting quantum processors is essential as the number of qubits increases and coherent multi-qubit operations span beyond the capacity of a single control module. The Quantum Instrumentation Control Kit (QICK), built on AMD RFSoC platforms, offers a flexible open-source framework for pulse-level qubit control but lacks native support for multi-board synchronization, limiting its applicability to mid- and large-scale quantum devices. To overcome this limitation, we introduce Manarat, a scalable multi-board control platform based on QICK that incorporates hardware, firmware, and software enhancements to enable sub-100 ps timing alignment across multiple AMD ZCU216 RFSoC boards. Our system integrates a low-jitter clock distribution network, modifications to the tProcessor, and a synchronization scheme to ensure deterministic alignment of program execution across boards. It also includes a custom analog front-end for flux control that combines high-speed RF signals with software-programmable DC biasing voltages generated by a low-noise, high-precision DAC. These capabilities are complemented by a software stack capable of orchestrating synchronized multi-board experiments and fully integrated with the open-source Qibo framework for quantum device calibration and algorithm execution. We validate Manarat on a 10-qubit superconducting processor controlled by two RFSoC boards, demonstrating reliable execution of synchronized control sequences for cross-board CZ gate calibration. These results confirm that sub-nanosecond synchronization and coherent control are achievable across multiple RFSoC boards, enabling scalable operation of superconducting quantum computers.
Control electronics for superconducting quantum processors have strict requirements for accurate command of the sensitive quantum states of their qubits. Hinging on the purity of ultra-phase-stable oscillators to upconvert very-low-noise baseband pulses, conventional control systems can become prohibitively complex and expensive when scaling to larger quantum devices, especially as high sampling rates become desirable for fine-grained pulse shaping. Few-gigahertz radio-frequency (RF) digital-to-analog converters (DACs) present a more economical avenue for high-fidelity control while simultaneously providing greater command over the spectrum of the synthesized signal. Modern RF DACs with extra-wide bandwidths are able to directly synthesize tones above their sampling rates, thereby keeping the system clock rate at a level compatible with modern digital logic systems while still being able to generate high-frequency pulses with arbitrary profiles. We have incorporated custom superconducting qubit control logic into off-the-shelf hardware capable of low-noise pulse synthesis up to 7.5 GHz using an RF DAC clocked at 5 GHz. Our approach enables highly linear and stable microwave synthesis over a wide bandwidth, giving rise to high-resolution control and a reduced number of required signal sources per qubit. We characterize the performance of the hardware using a five-transmon superconducting device and demonstrate consistently reduced two-qubit gate error (as low as 1.8%), which we show results from superior control chain linearity compared to traditional configurations. The exceptional flexibility and stability further establish a foundation for scalable quantum control beyond intermediate-scale devices.