Abstract We investigate the impact of the correlation between error gates on the fault-tolerant threshold in quantum circuits under three typical noise models. In the fault-tolerant encoding schemes for two fundamental quantum logical operations, we extend the conventional error injection method by simultaneously applying error gates to both control and target qubits after two-qubit gate operations, with a quantitative characterization of the correlation strength between these error gates. The results show that the fault-tolerant error threshold can be noticeably enhanced by the presence of correlations between error gates, resulting in more robust quantum circuit implementations. We further apply fault-tolerant encoding to the single-qubit teleportation circuit and investigate the effect of correlated noise on its error threshold. The results show that the threshold varies non-monotonically with the correlation strength and that the system’s fault-tolerance differs significantly across noise models.
Abstract We investigate the impact of the correlation between error gates on the fault-tolerant threshold in quantum circuits under three typical noise models. In the fault-tolerant encoding schemes for two fundamental quantum logical operations, we extend the conventional error injection method by simultaneously applying error gates to both control and target qubits after two-qubit gate operations, with a quantitative characterization of the correlation strength between these error gates. The results show that the fault-tolerant error threshold can be noticeably enhanced by the presence of correlations between error gates, resulting in more robust quantum circuit implementations. We further apply fault-tolerant encoding to the single-qubit teleportation circuit and investigate the effect of correlated noise on its error threshold. The results show that the threshold varies non-monotonically with the correlation strength and that the system’s fault-tolerance differs significantly across noise models.
A major challenge in practical quantum computation is the ineludible errors caused by the interaction of quantum systems with their environment. Fault-tolerant schemes, in which logical qubits are encoded by several physical qubits, enable to the output of a higher probability of correct logical qubits under the presence of errors. However, strict requirements to encode qubits and operators render the implementation of a full fault-tolerant computation challenging even for the achievable noisy intermediate-scale quantum technology. Especially the threshold for fault-tolerant computation still lacks experimental verification. Here, based on an all-optical setup, we experimentally demonstrate the existence of the threshold for the fault-tolerant protocol. Four physical qubits are represented as the spatial modes of two entangled photons, which are used to encode two logical qubits. The experimental results clearly show that when the error rate is below the threshold, the probability of correct output in the circuit, formed with fault-tolerant gates, is higher than that in the corresponding non-encoded circuit. In contrast, when the error rate is above the threshold, no advantage is observed in the fault-tolerant implementation. The developed high-accuracy optical system may provide a reliable platform to investigate error propagation in more complex circuits with fault-tolerant gates.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
Quantum error correction protects fragile quantum information by encoding it into a larger quantum system. These extra degrees of freedom enable the detection and correction of errors, but also increase the operational complexity of the encoded logical qubit. Fault-tolerant circuits contain the spread of errors while operating the logical qubit, and are essential for realizing error suppression in practice. While fault-tolerant design works in principle, it has not previously been demonstrated in an error-corrected physical system with native noise characteristics. In this work, we experimentally demonstrate fault-tolerant preparation, measurement, rotation, and stabilizer measurement of a Bacon-Shor logical qubit using 13 trapped ion qubits. When we compare these fault-tolerant protocols to non-fault tolerant protocols, we see significant reductions in the error rates of the logical primitives in the presence of noise. The result of fault-tolerant design is an average state preparation and measurement error of 0.6% and a Clifford gate error of 0.3% after error correction. Additionally, we prepare magic states with fidelities exceeding the distillation threshold, demonstrating all of the key single-qubit ingredients required for universal fault-tolerant operation. These results demonstrate that fault-tolerant circuits enable highly accurate logical primitives in current quantum systems. With improved two-qubit gates and the use of intermediate measurements, a stabilized logical qubit can be achieved.
Quantum error correction codes are essential for fault-tolerant quantum computing. They are a method of detecting and correcting errors in a quantum computer by encoding logical qubits across multiple physical qubits. Several prominent error correction codes have been developed and larger and more complex codes are being developed continuously. However, evaluating the fault-tolerance of these larger codes is becoming exponentially more complicated. While conventional methods of proving and evaluating the fault-tolerance of these circuits have worked thus far, they are soon to be obsolete. The aim of this thesis is to develop a framework that automatically evaluates the fault-tolerance of a quantum error correction circuit across different hardware architectures. The framework works as follows: it takes a noiseless quantum error correction code; injects hardware-realistic noise into it; and evaluates the fault-tolerance of the resulting noisy circuit by estimating its logical error rate through Monte Carlo sampling. For the injection of hardware-realistic noise, this thesis considers noise stemming from five different quantum computing hardware architectures: superconducting qubits, neutral atoms, trapped ions, photonic qubits, and spin qubits. The noise model was constructed by extracting single-qubit gate, two-qubit gate and measurement error fidelities from current experimental literature. The noise model and circuit generation is implemented in Python, circuit representation and noise injection is executed in Stim and decoding and estimating the logical error rate is achieved through PyMatching. The framework is evaluated on the repetition code, the surface code, and the color code; the logical error rate is estimated across all five hardware architectures under the noise model; and the results are discussed in the context of hardware compatibility for the given codes.
This thesis is concerned with fault-tolerant quantum information processing using quantum error-correcting codes. It contains two major pieces of work. The first is a study of coherent noise in the context of stabilizer error-correcting codes. The second is a proposed scheme for a universal set of fault-tolerant logical gates in a particular code family built out of the 3D toric code. Chapter 1 provides an introduction to quantum computation and fault tolerance. Many basic concepts in error-correcting codes are defined. Special attention is paid to the set of code properties that are most likely to determine how easily a given fault-tolerant scheme might be implemented on a physical device. These include the fault-tolerant noise threshold and the overhead. In Chapters 2 and 3 we study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In Chapter 2 we introduce coherent noise and incoherent noise and a number of methods that are useful for the study of coherent noise. We study the repetition code as a basic example, and we also study a correlated noise model. In Chapter 3 we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment. Chapter 4 is connected to another aspect of fault tolerance, fault-tolerant logical gates. The toric code is a promising candidate for fault-tolerant quantum computation because of its high threshold and low-weight stabilizers. A universal gate set in the toric code generally requires magic state distillation, which can incur a significant qubit overhead. In this work we construct an error-correcting code in three dimensions based on the toric code that features a fault-tolerant T gate with no magic state distillation required. We further describe a subsystem version of our code which supports a universal set of fault-tolerant gates. This code can be converted into the stabilizer version using gauge-fixing. We also argue that our code can be converted to a (2+1)-D protocol, where a 2D lattice undergoes a measurement-based protocol over time. In this way, a fault-tolerant logical T gate can be realized in a 2D toric code structure.
Quantum circuits implementing fault-tolerant quantum error correction (QEC) for the three-qubit bit-flip code and five-qubit code are studied. To describe the effect of noise, we apply a model based on a generalized effective Hamiltonian where the system-environment interactions are taken into account by including stochastic fluctuating terms in the system Hamiltonian. This noise model enables us to investigate the effect of noise in quantum circuits under realistic device conditions and avoid strong assumptions such as maximal parallelism and weak storage errors. Noise thresholds of the QEC codes are calculated. In addition, the effects of imprecision in projective measurements, collective bath, fault-tolerant repetition protocols, and level of parallelism in circuit constructions on the threshold values are also studied with emphasis on determining the optimal design for the fault-tolerant QEC circuit. These results provide insights into the fault-tolerant QEC process as well as useful information for designing the optimal fault-tolerant QEC circuit for particular physical implementation of quantum computer.