This thesis is concerned with fault-tolerant quantum information processing using quantum error-correcting codes. It contains two major pieces of work. The first is a study of coherent noise in the context of stabilizer error-correcting codes. The second is a proposed scheme for a universal set of fault-tolerant logical gates in a particular code family built out of the 3D toric code. Chapter 1 provides an introduction to quantum computation and fault tolerance. Many basic concepts in error-correcting codes are defined. Special attention is paid to the set of code properties that are most likely to determine how easily a given fault-tolerant scheme might be implemented on a physical device. These include the fault-tolerant noise threshold and the overhead. In Chapters 2 and 3 we study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In Chapter 2 we introduce coherent noise and incoherent noise and a number of methods that are useful for the study of coherent noise. We study the repetition code as a basic example, and we also study a correlated noise model. In Chapter 3 we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment. Chapter 4 is connected to another aspect of fault tolerance, fault-tolerant logical gates. The toric code is a promising candidate for fault-tolerant quantum computation because of its high threshold and low-weight stabilizers. A universal gate set in the toric code generally requires magic state distillation, which can incur a significant qubit overhead. In this work we construct an error-correcting code in three dimensions based on the toric code that features a fault-tolerant T gate with no magic state distillation required. We further describe a subsystem version of our code which supports a universal set of fault-tolerant gates. This code can be converted into the stabilizer version using gauge-fixing. We also argue that our code can be converted to a (2+1)-D protocol, where a 2D lattice undergoes a measurement-based protocol over time. In this way, a fault-tolerant logical T gate can be realized in a 2D toric code structure.
This thesis is concerned with fault-tolerant quantum information processing using quantum error-correcting codes. It contains two major pieces of work. The first is a study of coherent noise in the context of stabilizer error-correcting codes. The second is a proposed scheme for a universal set of fault-tolerant logical gates in a particular code family built out of the 3D toric code. Chapter 1 provides an introduction to quantum computation and fault tolerance. Many basic concepts in error-correcting codes are defined. Special attention is paid to the set of code properties that are most likely to determine how easily a given fault-tolerant scheme might be implemented on a physical device. These include the fault-tolerant noise threshold and the overhead. In Chapters 2 and 3 we study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In Chapter 2 we introduce coherent noise and incoherent noise and a number of methods that are useful for the study of coherent noise. We study the repetition code as a basic example, and we also study a correlated noise model. In Chapter 3 we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment. Chapter 4 is connected to another aspect of fault tolerance, fault-tolerant logical gates. The toric code is a promising candidate for fault-tolerant quantum computation because of its high threshold and low-weight stabilizers. A universal gate set in the toric code generally requires magic state distillation, which can incur a significant qubit overhead. In this work we construct an error-correcting code in three dimensions based on the toric code that features a fault-tolerant T gate with no magic state distillation required. We further describe a subsystem version of our code which supports a universal set of fault-tolerant gates. This code can be converted into the stabilizer version using gauge-fixing. We also argue that our code can be converted to a (2+1)-D protocol, where a 2D lattice undergoes a measurement-based protocol over time. In this way, a fault-tolerant logical T gate can be realized in a 2D toric code structure.
Abstract We study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In particular, we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment.
Fault-tolerant quantum computation traditionally incurs substantial resource overhead, with both qubit and time overheads scaling polylogarithmically with the size of the computation. While prior work by Gottesman showed that constant qubit overhead is achievable under stochastic noise using quantum low-density parity-check (QLDPC) codes, it has remained an open question whether similar guarantees hold under more general, non-stochastic noise models. In this work, we address this question by considering a general circuit-level noise model defined via the diamond norm, which captures both stochastic and non-stochastic noise, including coherent and amplitude damping noise. We prove that constant qubit overhead fault-tolerant quantum computation is achievable in this general setting, using QLDPC codes with constant rate and linear minimum distance. To establish our result, we develop a fault-tolerant error correction scheme and a method for implementing logic gates under general circuit noise. These results extend the theoretical foundations of fault-tolerant quantum computation and offer new directions for fault-tolerant architectures under realistic noise models.
Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.
Fault-tolerant quantum computation allows quantum computations to be carried out while resisting unwanted noise. Several error-correcting codes have been developed to achieve this task, but none alone are capable of transversal universal quantum computation. This universality is highly desired and often achieved using techniques such as code concatenation, code switching, magic state distillation, or pieceable fault tolerance. Existing constructions can incur substantial overhead or rely on properties specific to particular codes. This work proposes implementing logical Clifford and T gates through novel, ancilla-mediated, pieceable interactions to construct a universal fault-tolerant quantum gate set. Our construction is deterministic, does not modify the underlying data codes or registers, and is generic over all data stabilizer codes. Thus, any single code becomes capable of universal quantum computation by leveraging helper codes in ancilla registers and mid-circuit measurements. Furthermore, since these logical gates are stabilizer code-generic, these implementations enable communication between heterogeneous stabilizer codes.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
Quantum error correction protects fragile quantum information by encoding it into a larger quantum system. These extra degrees of freedom enable the detection and correction of errors, but also increase the operational complexity of the encoded logical qubit. Fault-tolerant circuits contain the spread of errors while operating the logical qubit, and are essential for realizing error suppression in practice. While fault-tolerant design works in principle, it has not previously been demonstrated in an error-corrected physical system with native noise characteristics. In this work, we experimentally demonstrate fault-tolerant preparation, measurement, rotation, and stabilizer measurement of a Bacon-Shor logical qubit using 13 trapped ion qubits. When we compare these fault-tolerant protocols to non-fault tolerant protocols, we see significant reductions in the error rates of the logical primitives in the presence of noise. The result of fault-tolerant design is an average state preparation and measurement error of 0.6% and a Clifford gate error of 0.3% after error correction. Additionally, we prepare magic states with fidelities exceeding the distillation threshold, demonstrating all of the key single-qubit ingredients required for universal fault-tolerant operation. These results demonstrate that fault-tolerant circuits enable highly accurate logical primitives in current quantum systems. With improved two-qubit gates and the use of intermediate measurements, a stabilized logical qubit can be achieved.