Superconducting quantum computing is a promising path towards achieving fault-tolerant quantum computation. Control and readout of signals at mK temperatures and subsequent amplification to room temperature electronics has allowed for impressive feats such as the first demonstration of quantum supremacy / advantage. The scalability of current systems that enable quantum computation are hindered by signal latency, excess heat loads, and overcrowding of cables in the dilution refrigerator. In this thesis, we propose cryogenic solutions using magnetic flux that improve scalability of superconducting quantum processors. In an effort to bridge the energy gap between the mK and 4 K stages of the dilution refrigerator, we simulate a flux soliton amplifier that can provide up to 10x gain to flux soliton pulses with low-loss in a resistance free traveling-wave bias scheme. To address latency and spatial cable considerations, we simulate a flux soliton cryogenic pulse generator that uses breather oscillations to create microwave pulses in the range of 15 - 24 gigahertz with over 97\% energy efficiency. In addition, we present an experimental investigation of transmission properties for resonantly phase-matched Josephson traveling-wave amplifiers in magnetic fields to develop useful intuition towards the challenge of operating cryogenic parametric amplifiers in high magnetic fields. Our work presents paths for utilizing magnetic flux as a resource to advance large-scale high-fidelity quantum computing.
Superconducting quantum computing is a promising path towards achieving fault-tolerant quantum computation. Control and readout of signals at mK temperatures and subsequent amplification to room temperature electronics has allowed for impressive feats such as the first demonstration of quantum supremacy / advantage. The scalability of current systems that enable quantum computation are hindered by signal latency, excess heat loads, and overcrowding of cables in the dilution refrigerator. In this thesis, we propose cryogenic solutions using magnetic flux that improve scalability of superconducting quantum processors. In an effort to bridge the energy gap between the mK and 4 K stages of the dilution refrigerator, we simulate a flux soliton amplifier that can provide up to 10x gain to flux soliton pulses with low-loss in a resistance free traveling-wave bias scheme. To address latency and spatial cable considerations, we simulate a flux soliton cryogenic pulse generator that uses breather oscillations to create microwave pulses in the range of 15 - 24 gigahertz with over 97% energy efficiency. In addition, we present an experimental investigation of transmission properties for resonantly phase-matched Josephson traveling-wave amplifiers in magnetic fields to develop useful intuition towards the challenge of operating cryogenic parametric amplifiers in high magnetic fields. Our work presents paths for utilizing magnetic flux as a resource to advance large-scale high-fidelity quantum computing.
Engineering research in quantum computing is geared towards building a ”useful” quantum computer; usefulness here refers to the capability of solving computation problems that hold significant value in commercial applications, but are currently impossible to do in reasonable time-frames using classical algorithms. This is fundamentally a problem of scale – problems that can be solved by few-qubit processors can also be readily simulated by classical supercomputers in realistic time-frames, but as these problems grow in complexity, quantum computers are believed to be able to provide an exponential speedup over their classical counterparts, the so-called quantum advantage. However, scaling quantum computers presents many challenges due to the need to perform complex signal control and data processing at nanosecond time scales on fragile quantum systems that need stringent degrees of isolation from the environment for the computations to be carried out with high fidelity. Some of the most promising implementations of experimental-grade quantum computers are maintained in cryogenic environments due to the fact that at low enough temperatures noise processes due to random thermal excitations can be minimized. However, the control and measurement of quantum processors is currently done by systems at room temperature, whose connections to the cryogenic environment present thermal loading that will need to be addressed as these processors scale and their IO requirements to co-processors grow in complexity. As such, one possible path to scaling co-processing capabilities without compromising the quantum processor’s performance is the partial or complete integration of the co-processor in the cryo-environment. Several works describe systems that aim to do just that; and ”Cryo-CMOS” has become an important research subspace. This thesis aims to add to the current advancements in this field, specifically in the area of qubit measurements. It culminates in the implementation of a radio receiver that leverages the advantages of BiCMOS technology in cryo-environments to measure the state of a superconducting transmon-based qubit while strapped to a 4K stage in a dilution refrigerator. Critically, we demonstrate that low-noise amplification, down-conversion, and demodulation can all be done in the cryo-environment on a constrained power budget, with high fidelity comparable to a state-of-the-art (InP-HEMT LNA-based) qubit readout system, when preceded by a high-gain, quantum-noise-limited Josephson parametric amplifier.
For superconducting quantum processors, microwave signals are delivered to each qubit from room-temperature electronics to the cryogenic environment through coaxial cables. Limited by the heat load of cabling and the massive cost of electronics, such an architecture is not viable for millions of qubits required for fault-tolerant quantum computing. Monolithic integration of the control electronics and the qubits provides a promising solution, which, however, requires a coherent cryogenic microwave pulse generator that is compatible with superconducting quantum circuits. Here, we report such a signal source driven by digital-like signals, generating pulsed microwave emission with well-controlled phase, intensity, and frequency directly at millikelvin temperatures. We showcase high-fidelity readout of superconducting qubits with the microwave pulse generator. The device demonstrated here has a small footprint, negligible heat load, great flexibility to operate, and is fully compatible with today's superconducting quantum circuits, thus providing an enabling technology for large-scale superconducting quantum computers.
Current superconducting quantum computers (QC) rely on a brute-force scaling approach where quantum chips operating at the millikelvin stage inside dilution refrigerators are connected to room-temperature electronics via an ever-increasing number of signal wires. In order to drastically scale up such systems without facing refrigeration challenges, these quantum interface electronics need to be integrated at cryogenic temperatures, ideally at the same stage as qubits. In this paper, we show that, by employing energy-efficient digital superconducting microchips based on single flux quantum (SFQ) technology, all essential functions to operate a full stack quantum computer can be integrated at 10 mK. They include digital qubit charge control and magnetic flux control for single- and two-qubit gates, as well as digital qubit readout.
Single flux quantum technology has the potential to enhance readout and control of superconducting quantum systems due to their low energy consumption, high speed, and cryogenic operating temperatures. Current cryogenic readout and control typically requires microwave pulses of specific frequencies to travel between the room temperature control electronics and the cryogenic setup. Latency in control and readout can be improved by generating pulses within the dilution refrigerator. In this work, we consider a protocol for generating gigahertz frequency microwave tones from trains of DC-centered fluxons and fluxoids in Josephson transmission lines using the dynamics of breather formation, without room temperature synthesis or shunt / bias resistors. Simulations show that pulses with frequencies in the range of 15.2 to 21.5 GHz can be generated with maximal energy efficiency of 97% and bandwidth from 40 to 365 MHz. This protocol can also be used to generate gigahertz frequency Gaussian pulses. We detail metrics relevant to the control and readout of quantum systems such as input power, output power, and footprint
Scaling superconducting quantum computers to the fault-tolerant regime calls for a commensurate scaling of the classical control and readout stack. Today's systems largely rely on room-temperature, rack-based instrumentation connected to dilution-refrigerator cryostats through many coaxial cables. Looking ahead, superconducting fault-tolerant quantum computers (FTQCs) will likely adopt a heterogeneous quantum-classical architecture that places selected electronics at cryogenic stages -- for example, cryo-CMOS at 4~K and superconducting digital logic at 4~K and/or mK stages -- to curb wiring and thermal-load overheads. This review distills key requirements, surveys representative room-temperature and cryogenic approaches, and provides a transparent first-order accounting framework for cryoelectronics. Using an RSA-2048-scale benchmark as a concrete reference point, we illustrate how scaling targets motivate constraints on multiplexing and stage-wise cryogenic power, and discuss implications for functional partitioning across room-temperature electronics, cryo-CMOS, and superconducting logic.
A hybrid quantum computing architecture combining quantum processors and quantum memory units allows for exploiting each component's unique properties to enhance the overall performance of the total system. However, superconducting qubits are highly sensitive to magnetic fields, while spin ensembles require finite fields for control, creating a major integration challenge. In this work, we demonstrate the first experimental setup that satisfies these constraints and provides verified qubit stability. Our cryogenic setup comprises two spatially and magnetically decoupled sample volumes inside a single dilution refrigerator: one hosting flux-tunable superconducting qubits and the other a spin ensemble equipped with a superconducting solenoid generating fields up to 50 mT. We show that several layers of Cryophy shielding and an additional superconducting aluminum shield suppress magnetic crosstalk by more than eight orders of magnitude, ensuring stability of the qubit's performance. Moreover, the operation of the solenoid adds minimal thermal load on the relevant stages of the dilution refrigerator. Our results enable scalable hybrid quantum architectures with low-loss integration, marking a key step toward scalable hybrid quantum computing platforms.